UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

(Mark One)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the Fiscal Year Ended December 31, 2022

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from _________ to _________

Commission file number: 001-40254

MOVANO INC.

(Exact name of registrant as specified in its charter)

Delaware		82-4233771
(State of incorporation)		(I.R.S. Employer Identification No.)

6800 Koll Center Parkway, Pleasanton, CA 94566

(Address of principal executive office) (Zip code)

(415) 651-3172

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Title of each class		Trading Symbol(s)		Name of each exchange on which registered
Common Stock, par value $0.0001 per share		MOVE		The Nasdaq Stock Market LLC

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer	☐	Accelerated filer	☐
Non-accelerated filer	☒	Smaller reporting company	☒
Emerging growth company	☒

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C.7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act): Yes ☐ No ☒

State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter. $57,424,946.

As of March 23, 2023, there were 41,310,108 shares of the registrant’s common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

The registrant intends to file a definitive proxy statement pursuant to Regulation 14A within 120 days after the end of the fiscal year ended December 31, 2022. Portions of such proxy statement are incorporated by reference into Part III of this Form 10-K.

MOVANO, INC.

TABLE OF CONTENTS

PART I
Item 1.	Business	1
Item 1A.	Risk Factors	12
Item 1B.	Unresolved Staff Comments	31
Item 2.	Properties	31
Item 3.	Legal Proceedings	31
Item 4.	Mine Safety Disclosures	31

PART II
Item 5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	32
Item 6.	Reserved	32
Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	33
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk.	40
Item 8.	Financial Statements and Supplementary Data.	F-1
Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.	41
Item 9A.	Controls and Procedures.	41
Item 9B.	Other Information.	41
Item 9C.	Disclosure Regarding Foreign Jurisdictions that Prevent Inspections	41

PART III
Item 10.	Directors, Executive Officers and Corporate Governance.	42
Item 11.	Executive Compensation	42
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholders Matters.	42
Item 13.	Certain Relationships and Related Transactions, and Director Independence	42
Item 14.	Principal Accountant Fees and Services	42

PART IV
Item 15.	Exhibits, Financial Statements and Schedules	43
Item 16.	Form 10-K Summary	44

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, that are intended to be covered by the “safe harbor” created by those sections. Forward-looking statements, which are based on certain assumptions and describe our future plans, strategies and expectations, can generally be identified by the use of forward-looking terms such as “believe,” “expect,” “may,” “will,” “should,” “would,” “could,” “seek,” “intend,” “plan,” “goal,” “project,” “estimate,” “anticipate,” “strategy”, “future”, “likely” or other comparable terms and references to future periods. All statements other than statements of historical facts included in this Annual Report on Form 10-K regarding our strategies, prospects, financial condition, operations, costs, plans and objectives are forward-looking statements. Examples of forward-looking statements include, among others, statements we make regarding: expectations for revenues, cash flows and financial performance, the anticipated results of our development efforts and the timing for receipt of required regulatory approvals and product launches.

Forward-looking statements are neither historical facts nor assurances of future performance. Instead, they are based only on our current beliefs, expectations and assumptions regarding the future of our business, future plans and strategies, projections, anticipated events and trends, the economy and other future conditions. Because forward-looking statements relate to the future, they are subject to inherent uncertainties, risks and changes in circumstances that are difficult to predict and many of which are outside of our control. Our actual results and financial condition may differ materially from those indicated in the forward-looking statements. Therefore, you should not rely on any of these forward-looking statements. Important factors that could cause our actual results and financial condition to differ materially from those indicated in the forward-looking statements include, among others, the following:

●

our limited operating history and our ability to achieve profitability;

●

our ability to continue as a going concern and our need for and ability to obtain additional capital in the future;

●

our ability to demonstrate the feasibility of and develop products and their underlying technologies;

●

the impact of competitive or alternative products, technologies and pricing;

●

the impact of the COVID-19 on our business and local and global economic conditions;

●

our ability to attract and retain highly qualified personnel;

●

our dependence on consultants to assist in the development of our technologies;

●

our ability to manage the growth of our Company and to realize the benefits from any acquisitions or strategic alliances we may enter in the future;

●

the impact of macroeconomic and geopolitical conditions;

●

our dependence on the successful commercialization of our proposed solution;

●

our dependence on third parties to design, manufacture, market and distribute our proposed products;

●

the adequacy of protections afforded to us by the patents that we own and the success we may have in, and the cost to us of, maintaining, enforcing and defending those patents;

●

our ability to obtain, expand and maintain patent protection in the future, and to protect our non-patented intellectual property;

●

the impact of any claims of intellectual property infringement, trade secret misappropriation, product liability, product recalls or other claims;

●

our need to secure required FCC, FDA and other regulatory approvals from governmental authorities in United States;

●

the impact of healthcare regulations and reform measures;

●

the accuracy of our estimates of market size for our planned solution;

●

our ability to implement and maintain effective control over financial reporting and disclosure controls and procedures;

●

our success at managing the risks involved in the foregoing items; and

●

other factors discussed in the Management’s Discussion and Analysis of Financial Condition and Results of Operations and Risk Factors sections of this Form 10-K.

Any forward-looking statement made by us in this report is based only on information currently available to us and speaks only as of the date on which it is made. We undertake no obligation to publicly update any forward-looking statement, whether written or oral, that may be made from time to time, whether as a result of new information, future developments or otherwise.

iii

PART I

As used in this Annual Report on Form 10-K, unless otherwise stated or the context otherwise requires, the terms “Movano”, “Movano Health” “we,” “us,” “our” and the “Company” refer to Movano Inc.

Item 1. Business

Overview

Movano Inc., dba Movano Health, a Delaware corporation, is developing a platform to deliver purpose-driven healthcare solutions to bring medical-grade, high-quality data to the forefront of consumer health devices.

The Company’s initial commercial product in development is the Evie Ring, which is a wearable designed specifically for women. The Evie Ring combines health and wellness metrics to give a full picture of one’s health, which we expect to include resting heart rate, heart rate variability (“HRV”), blood oxygen saturation (“SpO₂”), respiration rate, skin temperature variability, period and ovulation tracking, menstrual symptom tracking, activity profile, including steps, active minutes and calories burned, sleep stages and duration, and mood tracking. The device will provide women and their network of caregivers with continuous health data distilled down to simple, yet meaningful, insights to help them make manageable lifestyle changes and take a more proactive approach that could mitigate the risks of chronic disease.

Movano Health is planning to seek FDA clearance for the Evie Ring, which will make it one of the first consumer wearables that is also FDA cleared for medical use. We are on track to file our first FDA submission for the Evie Ring’s heart and SpO₂ data in the second quarter of 2023 following a successful pivotal hypoxia trial during the fourth quarter of 2022. FDA clearance of these metrics would ensure confidence of the Evie Ring’s vital signs monitoring capabilities and could make the device attractive for doctors and in clinical trials for patient monitoring.

In addition to the Evie Ring, we are developing the smallest ever patented and proprietary System-on-a-Chip (“SoC”) designed specifically for blood pressure or continuous glucose monitoring (“CGM”) systems. We built the integrated sensor from the ground up with multiple antennas and a variety of frequencies to achieve an unprecedented level of precision in health monitoring. We are currently conducting clinical trials with the SoC and developing algorithms that, if successful, will enable us to develop wearables that can monitor glucose non-invasively and blood pressure without a cuff. Our end goal is to bring a Class II FDA-cleared device to the market that includes CGM and cuffless blood pressure monitoring capabilities. Over time, our technology could also enable the measurement and continuous monitoring of other health data.

Problem

The scale of the chronic disease health crisis is enormous, and we believe the need to address it is immediate. The United States spent over 18% of its GDP on healthcare in 2021, and according to the American Heart Association 133 million Americans are living with at least one chronic illness with 170 million expected to be by 2030.

Coronavirus disease (“COVID-19”) has disproportionately affected the wellbeing of those with chronic conditions and the pandemic has created a heightened awareness about the importance of health and the high risk of complications. People have become more sensitive to the fact that managing health is not just about being physically fit but may also be a predictor of future quality of life and even lifespan. There is a need for optimized, accurate monitoring and maintenance of high-risk populations, such as those living with, or at heightened risk of, chronic conditions.

Wearable medical technology today, including CGMs and blood pressure monitors, have made it easier for those affected by chronic diseases, but many devices are still invasive, inconvenient and/or expensive.

COVID-19

COVID-19 is an infectious disease caused by the SARS-CoV-2 virus, which was declared a public health emergency of international concern by the World Health Organization (“WHO”) in 2020. The virus can spread easily from an infected person’s mouth or nose in small liquid particles when they cough, sneeze, speak, sing or breathe. As of early January 2023, WHO reported that since the beginning of the pandemic there has been more than 669 million cases and nearly 6.74 million deaths caused by COVID-19 worldwide.

While some people infected with the virus experience mild respiratory illness and recover without requiring special treatment, others, especially those with chronic conditions, become seriously ill. Those with underlying medical conditions, such as diabetes or hypertension, are more likely to experience severe illness, ICU admission and face a higher risk of mortality. When people with diabetes become sick, it can dramatically raise blood sugar levels. Having high blood sugar can make it more difficult to fight off illnesses like COVID-19.

However, the risk of getting very sick from COVID-19 is likely to be lower if chronic conditions are well-managed.

The COVID-19 pandemic and the consequent global healthcare crisis have highlighted the need for better monitoring of higher risk populations, such as those living with chronic conditions, to prevent continued deaths and long-term health issues.

Diabetes

Diabetes is a chronic, life-threatening disease for which there is no known cure. The disease is caused by the body’s inability to produce or effectively utilize the hormone insulin, which prevents the body from adequately regulating blood glucose levels. If glucose levels are not managed properly, it can lead to serious health conditions and complications, including heart disease, limb amputations, loss of kidney function, blindness, seizures, coma and even death. According to the 2021 International Diabetes Federation Atlas, an estimated 537 million people worldwide had diabetes as of the date of the report. The number of people with diabetes (“PWDs”) worldwide is estimated to grow to 783 million by 2045, driven primarily by growth in type 2 diabetes and due to various reasons, including a change in dietary trends, an aging population and increased prevalence of the disease in younger people.

To maintain blood glucose levels within the normal range, many PWDs seek to actively monitor their blood glucose levels. The traditional method of self-monitoring of blood glucose requires lancing the fingertips, commonly referred to as finger sticks, multiple times per day to obtain a blood drop to be applied to a test strip inside a blood glucose meter. This method of monitoring glucose levels is inconvenient and can be painful. Additionally, because each measurement represents a single blood glucose value at a single point in time, it provides limited information regarding trends in blood glucose levels over the course of the day, month, or year.

In contrast, CGMs are generally less painful and typically involve the insertion of a microneedle sensor into the body to measure glucose levels in the interstitial fluid throughout the day and night, providing real-time data that shows trends in glucose measurements. As a result, CGMs improve glycemic control and quality of life, particularly in individuals with type 1 diabetes treated with continuous subcutaneous insulin infusion or multiple daily insulin injection therapy and help support avoidance of hypoglycemia.

However, most of today’s CGMs are still invasive, inconvenient, and expensive. Many require an implant that must be replaced after 10-14 days. This process can be uncomfortable, increases susceptibility to infections, and is expensive to manage. As a result, the vast majority of PWDs do not use a CGM. Moreover, the broader health-conscious population, including individuals with prediabetes, lacks the ability to easily monitor blood glucose levels, which can serve as a proxy for metabolic health and risk for chronic diseases. Notwithstanding the above, demand for CGMs, in general, continues to increase, with approximately three million worldwide users and industry sales estimated at more than $4.7 billion in 2021, according to published Wall Street analyst estimates.

Hypertension

Blood pressure is the pressure on the walls of arteries caused by the heart pumping blood through the circulatory system. When the force against blood vessel walls becomes too high, the heart works harder, which can cause damage to blood vessels, ultimately leading to a condition called hypertension, or high blood pressure.

According to the American Heart Association, high blood pressure affects nearly one third of the adult population worldwide. Called “the silent killer,” many people are not aware that they have high blood pressure until it is too late because there are typically no symptoms. However, hypertension can lead to life-threatening conditions like heart attacks, strokes, kidney damage, amongst other problems. While there is no cure, using prescription medications, making dietary changes, increasing activity levels and maintaining awareness of blood pressure can significantly reduce the risks associated with hypertension.

Because hypertension usually has no symptoms, the only way to detect hypertension is through a blood pressure test. The test traditionally requires placement of a cuff with a pressure gauge around the upper arm that is inflated to squeeze the blood vessels. When the cuff is fully inflated, no blood flow occurs through the artery. As the cuff is deflated below the systolic pressure, the reducing pressure exerted on the artery allows blood to flow through it and sets up a detectable vibration in the arterial wall. When the cuff pressure falls below the patient’s diastolic pressure, blood flows smoothly through the artery in the usual pulses, without any vibration being set up in the wall.

In recent years, blood pressure monitoring devices have become available for personal, in-home use, so people can gain an understanding of their blood pressure in between their regular doctor visits. While there are medical device and consumer electronic companies selling blood pressure monitors today, they still have limitations and tend to be cumbersome. Some provide blood pressure estimates, rather than exact readings. Often times, blood pressure cuffs require a very specific fit based on arm size and can be very sensitive to placement on the arm, movement and body position. If not used properly, errors in measuring blood pressure can occur. Most blood pressure cuffs are not continuous, which require the user to remember to take readings at the same general time of day to avoid inconsistencies when looking at trends over time. Notwithstanding the above, demand for blood pressure monitoring devices, in general, continues to increase, with industry sales estimated at approximately $3.9 billion in 2022, according to Grand View Research.

If we can develop a device that can successfully integrate blood pressure measurements continuously and non-invasively, the device could potentially help individuals understand in real-time how food intake, sleep, activity levels, stress and more can directly impact their blood pressure and their heart health. With the ability to get actionable feedback, people should be able to be more engaged in making better decisions for their health.

Solution

As the healthcare market transitions from a practice of treating the sick to a consumer-driven market focused on preventative care and longevity, consumers’ appetite for digital health offerings is increasing and there is a significant and growing interest in digital health technology that allows users to address their unique needs and life circumstances. We believe women are particularly impacted by the state of healthcare today and are looking for tools that give them greater control over their health and confidence in their ability to self-manage and optimally prepare for potential health risks. To maximize their utility, we believe these tools should be intelligent, affordable, and fit seamlessly into every woman’s lifestyle.

Consequently, we are creating intelligent, sleek and comfortable solutions that sit at the intersection of the medical and consumer device market, providing medical-grade diagnostics in addition to lifestyle fitness monitoring. Our first product in development is a smart ring called the Evie Ring.

The Evie Ring combines health and wellness metrics to give a full picture of one’s health, which we expect will include resting heart rate, HRV, SpO₂, respiration rate, skin temperature variability, period and ovulation tracking, menstrual symptom tracking, activity profile, including steps, active minutes and calories burned, sleep stages and duration, and mood tracking. This data is delivered through a mobile app which aims to simplify how data is presented, moving away from complex graphs and charts, and turning biometric data into actionable insights that will help women make manageable lifestyle changes and take a more proactive approach to mitigating the risks of chronic disease.

In future iterations of this product or another wearable device developed by Movano Health, we plan to measure glucose, blood pressure and heart rate without a needle or cuff. We will do this directly from the blood vessel by utilizing mmWave RF to probe the arteries to identify various RF properties, including RF connectivity, permittivity, and reflectivity. As these properties change, we can measure the changes in glucose and blood pressure concentrations in the blood vessels. Using our signal processing algorithms, we intend to separate the pulse pressure and glucose waveforms to jointly solve for blood pressure, pulse, and glucose. With additional sensors and an accelerometer, we expect we will also be able to estimate SpO₂ measurements and measure steps and calories. We intend to provide the user real-time data, including trending, through our proprietary cloud-based network app, and enable data sharing with healthcare providers, caregivers, and family to optimize care and reinforce positive behaviors and behavioral change. By providing knowledge about glucose levels, blood pressure, heart rate, HRV, sleep, respiration, temperature, blood oxygen, steps and calories, we believe our end-to-end solution will be a valuable preventative care tool that will help users make smarter health decisions, ultimately increasing a person’s ability to self-manage chronic conditions and reducing the frequency of doctor and hospital visits.

Image: A non-functional rendering of what Movano’s Health’s Evie Ring currently in development may ultimately look like

Proprietary Technology

The Evie Ring uses a multitude of optical sensors to estimate a variety of analytics, including SpO₂ and heart rate measurements, an accelerometer to measure steps and calories, as well as a battery, a charging integrated circuit, flash to store data, and Bluetooth to communicate with our mobile application.

In future products, we plan to incorporate our patented RF technology that leverages ultra-wideband multi-antenna RF with advanced signal processing and interference cancellation, machine learning and the cloud. Our RF technology is deeply rooted in military and telecom applications, and key members of our engineering team worked with the pioneers of this technology.

We intend to leverage the potential of this technology to design miniature, dynamic integrated circuits (“ICs”) and proprietary algorithms that, if small and low-powered enough, may be embeddable into a variety of devices including a wearable, standalone phone case, ring or skin patch. These devices could communicate on a minute-by-minute basis, using Bluetooth Low Energy (“BLE”) to a smartphone or a mobile device. Our intention is to design the system to be capable of connecting to Movano Health’s cloud service, which is currently in development. Combined with our cloud analytics, we expect the technology will allow medical professionals, family members, caregivers and individuals to understand trends related to heart rate, HRV, glucose and blood pressure and make educated decisions about health, care and treatment based on that data. The goal of our development efforts is to combine machine learning with different statistical signal processing algorithms, which we believe will enable us to take advantage of multiple strains of continuous, real time Movano Health sensor data to generate advanced analytics like predictive alerts, risk profiles, and more, which are personalized for each wearer.

We believe that the main advantage of our technology under development, as compared to certain existing technologies like cameras and infrared (“IR”) sensors, will be the ability to achieve fine RF mapping in a cost-effective and small form factor. As it relates to CGM and blood pressure monitor applications, we believe that our competitive edge will be that our technology solution can be deployed on a non-invasive and cuffless basis, packaged in a wearable device, so wearers feel like people, not patients, and priced more affordably for users and payers compared to existing devices.

Our Planned Solution

Our first planned product is currently in the development stage, and we are testing the wearability and functionality of the device with employees and multiple beta partners, including pharmaceutical and medical device companies, integrated health networks and universities. For testing, we are using a device similar to the one that is depicted in the image above.

We are also testing a wrist-worn wearable prototype that contains our proprietary and patented SoC. In its current state, this prototype allows us to collect data, which we are using to generate glucose, blood pressure and heart rate estimates. The accuracy of the technology will be refined as our algorithms are improved and as we test larger cross sections of people in our external studies. We are currently preparing for clinical trials using the SoC and our smallest wrist-worn prototype to date.

We have conducted preliminary tests thus far to diversify the data we are collecting, enabling us to better optimize our system. Our preliminary blood pressure testing took place in 2020 over a three-month period during which we collected nearly a hundred hours of data on six internal subjects. Data collections with our prototype were compared to a traditional blood pressure monitor before each test. Our preliminary glucose testing took place in 2020 over a four to five month time period during which we collected several hundreds of hours of data on three internal test subjects. Data collections with our prototype were compared to fingerstick data every five minutes over the course of an hour.

In June 2021, we received approval from an Institutional Review Board (“IRB”) to conduct blood pressure studies on up to 200 participants in our laboratory. In our first study, we used our non-invasive, iPhone-sized prototype device to collect pulse pressure waveform data from 45 external participants. This study marked a significant milestone, confirming our ability to quickly, seamlessly, and efficiently enroll and test subjects and collect meaningful data at the laboratory inside our corporate offices.

In December 2021, we completed our third and largest blood pressure clinical trial, which was conducted on 110 participants in our laboratory. During the study, participants wore our adjustable full finger ring prototype and our wrist-worn wearable prototype along with a hospital-grade FDA-cleared vital signs monitor as the control. Our devices collected pulse pressure waveform data, which will be compared to data from the control device in order to further our signal processing and algorithms.

In February 2022, we completed our second IRB-approved glucose pilot study, which was conducted on ten participants with type 1 diabetes of varying gender, age, ethnicity and weight in conjunction with an independent Clinical Laboratory Improvement Amendments (“CLIA”) certified clinical lab. During each four-hour session, participants wore our wrist-worn wearable prototype and either a FDA cleared finger stick glucose tester, a subject’s existing CGM device, and/or a vital sign monitoring device. We expect the data collected in the study will ultimately allow us to further refine the algorithms we use to calculate glucose values and vital sign measurements and will also help guide us as to what specific follow-on studies will be done in support of future FDA clearances.

In 2021, we completed the tapeout of our single-chip solution with our fabrication partner, Global Foundries. The tapeout of the SoC is a major milestone for us as we were able to shrink our proprietary multi-chip architecture into a singular integrated circuit. With one compact sensor, we have the flexibility to design innovative, small form factors that will be key to developing competitive commercial products in the future. In 2022, we successfully validated the SoC and are currently integrating the SoC into a new prototype system, which will be closer in size and shape to our final product, and enable the Company to conduct longer, more complex blood pressure and glucose studies, which are being planned for 2023.

To date, we have completed two clinical trials with the Evie Ring. Following a successful pilot hypoxia study in July 2022, which compared the accuracy of our heart rate and SpO₂ data to reference devices, we completed a pivotal hypoxia study in October 2022 with the Evie Ring. During the pilot and pivotal studies, our solution achieved a margin of error well below the FDA’s 3.5% requirement for SpO₂, and the ring also estimated heart rate with accuracy commensurate with the FDA’s standards. Based on the positive results of these studies, we plan to file for FDA clearance on these metrics by mid-2023. If clearance is received, the Evie Ring would be deemed a medical device. This unique competitive advantage is not only a key pillar in building brand trust and loyalty but will also redefine the expectations of wearable devices. 

Having our product cleared as a medical device would also open a host of incremental opportunities for us beyond what you see in the market today. Currently, many wearable devices sell-in to companies for employee benefits or partner with payors. As an FDA-cleared medical device, the Evie Ring may be used with pharmaceutical companies for post-market surveillance or with medical device companies looking to determine the efficacy of their offering.  

We expect the direct-to-consumer launch of the Evie Ring to take place in the summer of 2023 prior to any FDA decision regarding medical device clearance. We have hired a world class go-to-market leadership team and have been working with leading app development partners to build on the foundational elements already in place to create a unique and valuable user experience. Further, we have engaged leading marketing, branding, website development and consumer research partners, to ensure the brand is engaging and relevant to the target audience.

To prepare for the consumer launch of the Evie Ring, we are conducting initial beta test programs to evaluate the fit and functionality of the ring with four strategic partners, including Stanford University’s Applied Sports Science Department, Novant Health, a not-for-profit integrated system of medical centers with more than 1,800 physicians providing care through six million annual patient visits at nearly 800 locations across North Carolina, South Carolina and Georgia, a major global pharmaceutical company and a leading patient-focused medical device company.

We are also preparing for a second beta program to evaluate the end to end Evie Ring experience with a new slate of partners, among which are a global athletic apparel company and two additional leading global medical device companies. The beta programs are expected to continue through mid-2023.

Our current primary goals are to successfully conduct beta programs and optimize the ring based on feedback from the programs in order to prepare for the commercialization of our first product. We also plan to begin testing of our single chip solution in more extensive clinical trials and are working with an original equipment manufacturer (“OEM”) to prepare for product manufacturing of the Evie Ring.

We have not launched a first commercial product and do not have a history of revenue or earnings or of product development or manufacturing. As described further below under “Regulation” and “Strategy”, before we can commercialize our planned solution, we will need to determine our commercialization strategy.

Intellectual Property

We are committed to developing and protecting our intellectual property and, where appropriate, filing patent applications to protect our technology. We rely on a combination of patent, copyright, trademark and trade secret laws and other agreements with employees and third parties to establish and protect our proprietary intellectual property rights. We require our officers, employees and consultants to enter into standard agreements containing provisions requiring confidentiality of proprietary information and assignment to us of all inventions made during the course of their employment or consulting relationship. We also enter into nondisclosure agreements with our commercial counterparties and limit access to, and distribution of, our proprietary information.

As of December 31, 2022, we own, jointly own, or have exclusive rights to 16 issued and in-force patents (that cover one or more of our products or product candidates for method, system and device development) that expire at various times between November 12, 2039 and December 18, 2039. Furthermore, as of December 31, 2022, we own, jointly own, or have exclusive rights to 38 pending U.S. patent applications, 4 pending foreign patent applications, and one pending Patent Cooperation Treaty (“PCT”) International patent application.

While we have not registered any of the copyrights in our software code, our software code, once written, would be protected by applicable U.S. copyright law.

Regulation

FDA Regulation

While the first iteration of the Evie Ring is expected to be a general wellness device and therefore not require FDA premarket clearance, over time we plan to execute accuracy studies to gain FDA clearances on its vital signs monitoring capabilities including heart rate, SpO₂ and respiration rate. In addition, we are currently conducting clinical trials with our proprietary and noninvasive RF-enabled technology and developing algorithms to enable us to add non-invasive CGM and cuffless blood pressure monitoring to our technology platform. Our end goal is to bring a Class II FDA-cleared device to the market, which may include additional form factors, and that includes CGM and cuffless blood pressure monitoring capabilities.

Before and after approval or clearance in the U.S., these subsequent iterations of our planned solution will be subject to extensive regulation by FDA under the Federal Food, Drug and Cosmetic Act (the “FD&C Act”) and/or the Public Health Service Act, as well as by other regulatory bodies. FDA regulations govern, among other things, the development, testing, manufacturing, labeling, safety, storage, record-keeping, market clearance or approval, advertising and promotion, import and export, marketing and sales, and distribution of medical devices and pharmaceutical products. There may be certain commercial applications for our technology that require less regulatory scrutiny than described below.

FDA Approval or Clearance of Medical Devices

In the U.S., medical devices are subject to varying degrees of regulatory control and are classified in one of three classes depending on the extent of controls FDA determines are necessary to reasonably ensure their safety and efficacy:

●

Class I: general controls, such as labeling, establishment registration, device listing, and, for some devices, adherence to quality system regulations;

●

Class II: the general controls plus certain special controls, FDA clearance via a premarket notification, or 510(k) submission, specific controls such as performance standards, patient registries and post-market surveillance and additional controls such as labeling and adherence to quality system regulations; and

●

Class III: general and special controls and approval of a premarket approval (“PMA”) application.

Our end goal for our planned solution in development is to bring to market a product that will be classified as a Class II medical device and thus require FDA clearance prior to marketing by means of a 510(k) clearance rather than a PMA application.

To request marketing authorization by means of a 510(k) clearance, we must submit a notification demonstrating that the proposed device is substantially equivalent to another legally marketed medical device, a “predicate device,” has the same intended use, and is as safe and effective as the predicate device and does not raise different questions of safety and effectiveness than a legally marketed device. 510(k) submissions generally include, among other things, a description of the device and its manufacturing, device labeling, medical devices to which the device is substantially equivalent, safety and biocompatibility information and the results of performance testing. In this case, the 510(k) submission will likely also include data from human clinical studies demonstrating performance and other parameters. Marketing may commence only when FDA issues a clearance letter finding substantial equivalence. The typical duration to receive a 510(k) clearance is approximately six to twelve months from the date of the initial 510(k) submission, although there is no guarantee that the timing will not be longer.

In some instances, the 510(k) pathway for product marketing may be used with only proof of substantial equivalence in technology for a given indication with a predicate device. In other instances, FDA may require additional clinical work to prove efficacy in addition to technological equivalence and basic safety. Whether clinical data is provided or not, FDA may decide to reject the substantial equivalence argument we present. If that happens, the device is automatically designated as a Class III device. The device sponsor must then fulfill more rigorous PMA requirements or can request a risk-based classification determination for the device in accordance with the “de novo” process, which may determine that the new device is of low to moderate risk and that it can be appropriately regulated as a Class I or II device. If a de novo request is granted, the device may be legally marketed, and a new classification is established. If the device is classified as Class II, the device may serve as a predicate for future 510(k) submissions. If the device is not reclassified through de novo review, then it must go through the standard PMA process for Class III devices.

After a device receives 510(k) clearance, any product modification that could significantly affect the safety or effectiveness of the product, or that would constitute a significant change in intended use, requires a new 510(k) clearance or, if the device would no longer be substantially equivalent, a PMA.

A PMA application must provide a demonstration of safety and effectiveness, which generally requires extensive pre-clinical and clinical trial data. Information about the device and its components, device design, manufacturing, and labeling, among other information, must also be included in the PMA. As part of the PMA review, FDA will inspect the manufacturer’s facilities for compliance with quality system regulation requirements, which govern testing, control, documentation, and other aspects of quality assurance with respect to manufacturing, testing, and storage of medical devices. If FDA determines the application or manufacturing facilities are not acceptable, FDA may outline the deficiencies in the submission and often will request additional testing or information. Notwithstanding the submission of any requested additional information, FDA ultimately may decide that the application does not satisfy the regulatory criteria for approval. During the review period, an FDA advisory committee, typically a panel of clinicians and statisticians, may be convened to review the application and recommend to FDA whether, or upon what conditions, the device should be approved. FDA is not bound by the advisory panel decision. While FDA often follows the panel’s recommendation, there have been instances in which FDA has not. FDA must find the information to be satisfactory to approve the PMA. The PMA approval can include post-approval conditions, including, among other things, restrictions on labeling, promotion, sale and distribution, or requirements to do additional clinical studies after approval. Even after approval of a PMA, a new PMA or PMA supplement is required to authorize certain modifications to the device, its labeling, or its manufacturing process. Supplements to a PMA often require the submission of the same type of information required for an original PMA, except that the supplement is generally limited to that information needed to support the proposed change from the product covered by the original PMA. The typical duration to receive PMA approval is approximately two years from the date of submission of the initial PMA application, although there is no guarantee that the timing will not be longer.

Clinical Trials of Medical Devices

One or more clinical trials are generally required to support a PMA application and are sometimes necessary to support a 510(k) submission. Clinical studies of unapproved or uncleared medical devices or devices being studied for uses for which they are not approved or cleared (investigational devices) must be conducted in compliance with FDA requirements. If an investigational device could pose a significant risk to patients, the sponsor company must submit an investigational device exemption application to FDA prior to initiation of the clinical study. If an institutional review board determines that a device study does not present a significant risk, an investigational device exemption submission to FDA is not required. An investigational device exemption application must be supported by appropriate data, such as animal and laboratory test results, showing that it is safe to test the device on humans and that the testing protocol is scientifically sound. Except for studies involving certain banned devices, the investigational device exemption will automatically become effective 30 days after receipt by FDA unless FDA notifies the company that the investigation may not begin. Clinical studies of investigational devices may not begin until an institutional review board has approved the study.

During the study, the sponsor must comply with FDA’s investigational device exemption requirements. These requirements include investigator selection, trial monitoring, adverse event reporting, and record keeping. The investigators must obtain patient informed consent, rigorously follow the investigational plan and study protocol, control the disposition of investigational devices, and comply with reporting and record keeping requirements. The sponsor, FDA, or the institutional review board at each institution at which a clinical trial is being conducted may suspend a clinical trial at any time for various reasons, including a belief that the subjects are being exposed to an unacceptable risk. During the approval or clearance process, FDA typically inspects the records relating to the conduct of one or more investigational sites participating in the study supporting the application.

Post-Approval Regulation of Medical Devices

After a device is cleared or approved for marketing, numerous and pervasive regulatory requirements continue to apply. These include:

●

FDA quality systems regulation, which governs, among other things, how manufacturers design, test, manufacture, exercise quality control over, and document manufacturing of their products;

●

labeling and claims regulations, which prohibit the promotion of products for unapproved or “off-label” uses and impose other restrictions on labeling; and

●

the Medical Device Reporting regulation, which requires reporting to FDA of certain adverse experiences associated with use of the product.

Good Manufacturing Practices Requirements

Manufacturers of most medical devices are required to comply with the good manufacturing practices set forth in the quality system regulation promulgated under Section 520 of the FD&C Act. Current good manufacturing practices regulations require, among other things, quality control and quality assurance as well as the corresponding maintenance of records and documentation. The manufacturing facility for an approved product must be registered with FDA and meet current good manufacturing practices requirements to the satisfaction of FDA pursuant to a pre-PMA approval inspection before the facility can be used. Manufacturers, including third party contract manufacturers, are also subject to periodic inspections by FDA and other authorities to assess compliance with applicable regulations. Failure to comply with statutory and regulatory requirements subjects a manufacturer to possible legal or regulatory action, including the seizure or recall of products, injunctions, consent decrees placing significant restrictions on or suspending manufacturing operations, and civil and criminal penalties. Adverse experiences with the product must be reported to FDA and could result in the imposition of marketing restrictions through labeling changes or in product withdrawal. Product approvals may be withdrawn if compliance with regulatory requirements is not maintained or if problems concerning safety or efficacy of the product occur following the approval.

Federal Communication Commission (“FCC”) Regulations

Our RF-based technology involves the transmission of RF energy, and as such, will be subject to regulation by the FCC, including the FCC’s equipment authorization regulations and its regulations governing human exposure to RF energy. In particular, we expect the planned solution to be regulated under Part 18 of the FCC’s rules governing industrial, scientific, and medical (ISM) equipment, and to be classified as consumer ISM equipment under that rule part. Based on the expected frequency and power of operation, we expect that the product will comply with the Part 18 technical specifications for these type of devices, which we will be required to verify under FCC equipment authorization procedures. We also expect, based on the device’s frequency and power of operation, that the product will comply with the FCC’s requirements governing human exposure to RF energy.

Environmental.

The cost of compliance with federal, state, and local provisions related to the protection of the environment has had no material effect on our business. There were no material capital expenditures for environmental control facilities in the year ended December 31, 2022, and there are no material expenditures planned for such purposes for the year ended December 31, 2023.

Strategy

We are a newly public emerging growth company without a history of operations or revenue, and therefore intend to explore alternative business strategies, including:

●

selling directly to consumers and enterprise customers through retail channels and through our website or other distribution channels;

●

partnering with OEMs, and value-added resellers (“VARs”); and

●

partnering with industry partners to incorporate our technology into new and existing devices.

Selling our products directly to consumers would not depend on locating a suitable OEM or VAR but would require us to complete the development and manufacture of our planned solution and commercialize the product on our own without the assistance a suitable OEM or VAR could provide. We may use distributors to help distribute our product to consumers, and the costs of working with such distributors, including without limitation the compensation to such distributors and the administrative and other costs of working with such distributors, would reduce our profit margin.

We expect that partnering with OEMs and VARs may accelerate product acceptance into our target market and allow us to take advantage of the sales and marketing and distribution infrastructure of those OEMs or VARs. In particular, we believe that a maker of ICs or a manufacturer of wearables would be an ideal strategic partner for the Company.

One of the challenges of IC development is ensuring the ability to source quality ICs with enough volume and competitive pricing. In order to strengthen our supply chain and prepare for the future, we formed a strategic partnership with a leading specialty foundry, for manufacturing and supplying our ICs.

Competition

With respect to a potential solution that is targeted at the general wellness market, we would face direct and indirect competition from a number of competitors who have developed and commercialized similar products. These competitors include Apple, Samsung, Garmin, Fitbit, WHOOP and Oura Health. Many of such potential competitors enjoy significantly greater name recognition and have significantly greater financial resources and expertise in research and development, manufacturing, and sales and marketing than we have.

With respect to our planned CGM solution, we will face direct and indirect competition from a number of competitors who have developed or are developing products for continuous monitoring of glucose levels. These competitors include DexCom, Inc., Abbott Laboratories, Medtronic plc, Roche Diagnostics, LifeScan, Inc., Ascensia Diabetes Care Holdings AG, Senseonics Holdings, Inc., Integrity Applications, Inc., Nemaura Medical, Biolinq Inc., and Profusa, Inc. Our planned solution will also compete with traditional glucometers, which remain an inexpensive alternative. Many of the companies we will compete with enjoy significantly greater name recognition and have significantly greater financial resources and expertise in research and development, manufacturing, preclinical testing, conducting clinical trials, obtaining regulatory approvals, and sales and marketing of approved products than we have.

We will also face direct and indirect competition from a number of competitors who have developed or are developing products that monitor blood pressure. These competitors include OMRON Corporation, Welch Allyn, A&D Medical, American Diagnostic Corporation, GE Healthcare, Masimo Corporation, Philips, SunTech Medical Inc., Aktiia, Biobeat and Blumio. Many of the companies we will compete with enjoy significantly greater name recognition and have significantly greater financial resources and expertise in research and development, manufacturing, preclinical testing, conducting clinical trials, obtaining regulatory approvals, and sales and marketing of approved products than we have.

Mergers and acquisitions in the medical device, biotechnology and diagnostic industries may result in even more resources being concentrated among a smaller number of our competitors. Other small or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies. There are also several academic and other institutions involved in various phases of technology development regarding blood glucose monitoring devices.

We believe the ability to deploy our technology on a non-invasive basis, packaged in a wearable that is painless, cuffless, simple, smart and competitively priced, will provide us with a competitive advantage. We cannot however assure you that we will be able to compete successfully.

Employees and Human Capital Resources

As of December 31, 2022, we had 34 employees, all of whom are employed on a full-time basis. None of our employees are covered by a collective bargaining agreement, and we believe our relationship with our employees is good.

Our human capital resources objectives include, as applicable, identifying, recruiting, retaining, incentivizing, and integrating our existing and new employees, advisors and consultants. The principal purposes of our equity incentive plans are to attract, retain and reward personnel through the granting of stock-based compensation awards, to increase stockholder value and the success of our company by motivating such individuals to perform to the best of their abilities and achieve our objectives.

Available Information

We were incorporated in the State of Delaware on January 2018 under the name Maestro Sensors Inc. On August 3, 2018, we changed our name to Movano Inc. Our principal executive offices are located at 6800 Koll Center Pkwy., Pleasanton, CA 94566, and our telephone number is (415) 651-3172. Our Internet website address is www.movanohealth.com. Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, including exhibits, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 are available free of charge through the investor relations page of our Internet website as soon as reasonably practicable after we electronically file such material with, or furnish it to, the U.S. Securities and Exchange Commission (the “SEC”). Our Internet website and the information contained therein or connected thereto are not intended to be incorporated into this Annual Report on Form 10-K.

Item 1A. Risk Factors

Risk Factors summary

The following is a summary of the principal risks that could adversely affect our business, operations, and financial results.

Risks Related to our Business

●

We are a development-stage technology company with no history of generating revenue, have a history of operating losses, and we may never achieve or maintain profitability.

●

We may be unable to continue as a going concern if we do not successfully raise additional capital on favorable terms, or at all, or if we fail to generate sufficient revenue from operation.

●

Our efforts may never demonstrate the feasibility of any product.

●

We face competition from other technology companies and our operating results will suffer if we fail to compete effectively.

●

The outbreak of COVID-19 has and could continue to adversely impact our business.

●

If we are not successful in attracting and retaining highly qualified personnel, we may not be able to successfully implement our business strategy.

	●	We are subject to risks associated with our utilization of consultants.

	●	We will need to grow the size of our organization, and we may experience difficulties in managing this growth.

	●	We may acquire businesses or products, or form strategic alliances, in the future, and we may not realize the benefits of such acquisitions.

	●	Our business is affected by macroeconomic conditions.

	●	The ongoing military action by Russia in Ukraine could have negative impact on the global economy, which could materially adversely affect our business, operations, operating results and financial condition.
	●	Our business and operations are subject to risks related to climate change.

	●	Our business could be negatively impacted by corporate social responsibility and sustainability matters.

Risks Related to Product Development, Manufacturing and Commercialization

●

We are highly dependent on the success of our proposed solution and cannot give any assurance that it will receive regulatory approval or clearance or be successfully commercialized.

●

We will depend on third parties to design, manufacture, market and distribute our products. If any third party fails to successfully design, manufacture, market or distribute any of our products, our business will be materially harmed.

●

Our business and operations would suffer in the event of information technology system failures, including cyber-attacks.

Risks Related to Intellectual Property and Other Legal Matters

●

It is difficult and costly to protect our intellectual property and our proprietary technologies, and we may not be able to ensure their protection.

●

If we are unable to protect the confidentiality of our proprietary information and know-how, the value of our technology and products could be adversely affected.

●

We may in the future be a party to intellectual property litigation or administrative proceedings that could be costly and could interfere with our ability to develop our products.

●

We may be subject to claims that our employees, consultants or independent contractors have wrongfully used or disclosed confidential information of their former employers or other third parties or claims asserting ownership of what we regard as our own intellectual property.

●

We could become subject to product liability claims, product recalls and warranty claims that could be expensive, divert management’s attention and harm our business.

Risks Related to Regulation

●

We expect to need FDA clearance or approval for our planned solution, which may be difficult to achieve, and existing laws or regulations or future legislative or regulatory changes may affect our business.

●

If any OEMs contracted to manufacture our proposed solution fail to comply with FDA’s Quality System Regulations or other regulatory bodies’ equivalent regulations, manufacturing operations could be delayed or shut down and the development of our proposed solution could suffer.

●

We expect our planned solution to be subject to certain Federal Communication Commission (“FCC”) regulations.

●

Our planned solution may in the future be subject to product recalls that could harm our reputation.

●

Healthcare reform measures could hinder or prevent our planned solution’s commercial success.

●

If we fail to comply with healthcare regulations with respect to our planned solution, we could face substantial penalties and our business, operations and financial condition could be adversely affected.

Risks Related to Owning Our Securities and Our Financial Results

●

Our quarterly and annual results may fluctuate significantly, may not fully reflect the underlying performance of our business and may result in decreases in the price of our securities.

●

Our disclosure controls and procedures may not prevent or detect all errors or acts of fraud.

●

The issuance of additional stock in connection with financings, acquisitions, our equity incentive plan, upon exercise of outstanding warrants or otherwise will dilute our existing stockholders.

●

Our stock price has fluctuated widely and is likely to continue to be volatile.

●

Our failure to meet the continued listing requirements of Nasdaq could result in a de-listing of our common stock.

●

Our Certificate of Incorporation will designate specific courts as the exclusive forum for certain litigation that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us.

●

We have not paid dividends in the past and have no immediate plans to pay dividends.

●

Concentration of ownership among our existing executive officers, directors and significant stockholders may prevent new investors from influencing significant corporate decisions.

●

We are an “emerging growth company” under the JOBS Act and we cannot be certain if the reduced disclosure requirements applicable to emerging growth companies will make our common stock less attractive to investors.

●

We are incurring significant increased costs as a result of becoming a public company that reports to the SEC and our management is required to devote substantial time to meet compliance obligations.

●

If securities or industry analysts do not publish research reports about our business, or if they issue an adverse opinion about our business, the price of our common stock and trading volume could decline.

●

Our charter documents and Delaware law may inhibit a takeover that stockholders consider favorable.

We operate in a rapidly changing environment that involves a number of risks that could materially affect our business, financial condition or future results, some of which are beyond our control. This discussion highlights some of the risks that may affect future operating results. These are the risks and uncertainties we believe are most important for you to consider. We cannot be certain that we will successfully address these risks. If we are unable to address these risks, our business may not grow, our stock price may suffer, and we may be unable to stay in business. Additional risks and uncertainties not presently known to us, which we currently deem immaterial or which are similar to those faced by other companies in our industry or business in general, may also impair our business operations.

Risks Related to Our Business

We are a development-stage technology company with no history of generating revenue, have a history of operating losses, and we may never achieve or maintain profitability.

We are a technology company that was formed in January 2018. We have a limited operating history, have no commercial products and have engaged in only research and development activities relating to our development of the Evie Ring and the SoC. The likelihood of success of our business plan must be considered in light of the challenges, substantial expenses, difficulties, complications and delays frequently encountered in connection with developing and expanding early-stage businesses and the regulatory and competitive environment in which we operate. Technology product development is a highly speculative undertaking, involves a substantial degree of risk and is a capital-intensive business.

As of December 31, 2022, we had an accumulated deficit of approximately $95.1 million. Without additional capital our existing cash and cash equivalents will be insufficient to fully fund our business plan. We expect to continue to incur losses for the foreseeable future, and these losses will likely increase as we prepare for and begin to commercialize our first product. Our ability to achieve revenue-generating operations and, ultimately, achieve profitability will depend on whether we can obtain additional capital when we need it, complete the development of our technology, receive regulatory approval of our technology, potentially find strategic collaborators that can incorporate our technology into applications which can be successfully commercialized and achieve market acceptance. There can be no assurance that we will ever generate revenues or achieve profitability. Even if we achieve profitability in the future, we may not be able to sustain profitability in subsequent periods.

We may be unable to continue as a going concern if we do not successfully raise additional capital on favorable terms, or at all, or if we fail to generate sufficient revenue from operations.

Primarily as a result of our lack of revenue, history of losses to date and our lack of liquidity, there is substantial doubt as to our ability to continue as a going concern. As of December 31, 2022, we had total assets of approximately $13.2 million and total liabilities of approximately $5.3 million. We believe that our cash and cash equivalents as of December 31, 2022 with the addition of the $6.85 million raised in our February 2023 public offering will not be sufficient to fund our projected operating requirements for the twelve-month period following the issuance of our consolidated financial statements for the fiscal year ended December 31, 2022. Additionally, such cash and cash equivalents and short-term investments are not expected to be sufficient to enable us to complete the development and commercialization of our proposed solution. We expect to continue to incur significant expenses and increasing operating losses for at least the next several years. Our forecast of the period through which our financial resources will be adequate to support our operations is a forward-looking statement and involves risks and uncertainties, and actual results could vary as a result of a number of factors, including the factors discussed elsewhere in this “Risk Factors” section. We have based this estimate on assumptions that may prove to be wrong, and we could utilize our available capital resources sooner than we currently expect.

We do not have any prospective arrangements or credit facilities as a source of future funds, and there can be no assurance that we will be able to raise sufficient additional capital on acceptable terms, or at all. If we are unable to raise additional capital or if we are unable to generate sufficient revenue from our operations, we may not stay in business. We may seek additional capital through a combination of private and public equity offerings, debt financings and strategic collaborations. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our existing stockholders could be significantly diluted and these newly-issued securities may have rights, preferences or privileges senior to those of holders of the common stock offered hereby. Debt financing, if obtained, may involve agreements that include covenants limiting or restricting our ability to take specific actions, such as incurring additional debt, which could increase our expenses and require that our assets secure such debt. Moreover, any debt we incur must be repaid regardless of our operating results. However, we do not own any significant assets that we expect could serve as acceptable collateral for a bank or other commercial lender. The above circumstances may discourage some investors from purchasing our stock, lending us money or from providing alternative forms of financing. In addition, the current economic instability in the world’s equity and credit markets may materially adversely affect our ability to sell additional securities and/or borrow cash. There can be no assurance that we will be able to raise additional working capital on acceptable terms or at all.

If we are unable to raise additional capital when needed, we may be required to curtail the development of our technology or materially curtail or reduce our operations. We could be forced to sell or dispose of our rights or assets. Any inability to raise adequate funds on commercially reasonable terms would have a material adverse effect on our business, results of operation and financial condition, including the possibility that a lack of funds could cause our business to fail and liquidate with little or no return to investors.

Even if we take these actions, they may be insufficient, particularly if our costs are higher than projected or unforeseen expenses arise. Additionally, if we raise additional funds through collaborations, strategic alliances or marketing, distribution or licensing arrangements with third parties, we may have to relinquish valuable rights to our technologies, future revenue streams or products or to grant licenses on terms that may not be favorable to us. If we choose to expand more rapidly than we presently anticipate, we may also need to raise additional capital sooner than expected.

Our efforts may never demonstrate the feasibility of any product.

We have developed a working prototype of our proposed solution that is capable of generating data we believe will be able to be used to measure various health vital signs and measurements, including heart rate, HRV, sleep, respiration, temperature, blood oxygen, steps, calories, blood glucose and blood pressure levels, but significant additional research and development activity will be required before we achieve a commercial product. We have conducted limited studies to compare the data our prototype device generates to measurements from conventional blood glucose and blood pressure measuring tools, and we are using the data generated in those studies to refine our product design and to develop the algorithms our product in development will utilize. However, we have not yet conducted any studies that demonstrate that our planned product is able to measure blood glucose or blood pressure levels at any particular accuracy level and we may never be able to complete any clinical studies that demonstrate accuracy levels that would be necessary for a commercial product. Our research and development efforts remain subject to all of the risks associated with the development of new products based on emerging technologies, including unanticipated technical or other problems and the possible insufficiency of funds needed in order to complete development of these products and enable us to execute our business plan. Any such problems may result in delays and cause us to incur additional expenses that would increase our losses. If we cannot complete, or if we experience significant delays in, developing our technology and products and services based on such technology for use in potential commercial applications, particularly after incurring significant expenditures, our business may fail. To our knowledge, the technological concepts we are applying to develop commercial applications have not previously been successfully applied by anyone else.

Accordingly, you should consider our prospects in light of the costs, uncertainties, delays and difficulties frequently encountered by companies in the early stages of development, especially technology companies such as ours. Potential investors should carefully consider the risks and uncertainties that a company with a limited operating history typically faces. In particular, potential investors should consider that we cannot assure you that we will be able to:

●

successfully implement or execute our current business plan, or that our business plan is sound;

●

successfully develop the technology necessary to develop our planned solution having the functionality and characteristics we discuss herein;

●

successfully develop a practical, efficient or economical commercial version of one or more products;

●

obtain any additional issued patents;

●

successfully develop proprietary technology and trade secrets and secure market exclusivity and/or adequate intellectual property protection for our products by way of patent protection or otherwise;

●

successfully protect any such proprietary technology and trade secrets from competitors and third parties claiming infringement or misappropriation;

●

attract and retain an experienced management and advisory team; and

●

raise sufficient funds in the capital markets to effectuate our business plan, including for the development and commercialization of our products.

If we cannot successfully execute any one of the foregoing, our business may not succeed and your investment will be adversely affected.

We face competition from other technology companies and our operating results will suffer if we fail to compete effectively.

The technology industry, generally, and the general wellness, continuous glucose and blood pressure monitoring markets, in particular, are intensely competitive, subject to rapid change, and significantly affected by new product introductions and other market activities by industry participants. To compete successfully, we will need to demonstrate the advantages of our products and technologies over well-established alternative solutions, products and technologies, as well as newer ones, and convince consumers and enterprises of the advantages of our products and technologies. With respect to our planned solutions, we will face direct and indirect competition from a number of competitors who have developed or are developing products for general wellness and continuous or periodic monitoring of glucose and blood pressure levels, and we anticipate that other companies will develop additional competitive products in the future. Traditional glucometers and blood pressure monitors remain an inexpensive alternative to our proposed solution. We have existing competitors and potential new competitors, many of which have or will have substantially greater name recognition, financial resources and expertise in research and development, manufacturing, preclinical testing, conducting clinical trials, obtaining regulatory approvals, and sales and marketing of approved products than we have. Mergers and acquisitions in the pharmaceutical, biotechnology and diagnostic industries may result in even more resources being concentrated among a smaller number of our competitors. Established competitors may invest heavily to quickly discover and develop novel technologies that could make obsolete or uneconomical the technology or the products that we plan to develop. Other small or early stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies. Any new product that we develop that competes with a competitor’s existing or future product may need to demonstrate compelling advantages in cost, convenience, quality, and safety to be commercially successful. In addition, new products developed by others could emerge as competitors to our proposed product development candidates. If our technology under development or our future products are not competitive based on these or other factors, our business would be harmed, and our financial condition and operations will suffer.

The outbreak of COVID-19 has and could continue to adversely impact our business.

The COVID-19 pandemic, together with related precautionary measures, has materially disrupted our business since February 2020 and may continue to disrupt our business for an unknown period of time. COVID-19 has significantly impacted, and may continue to significantly impact, our work force, supply chain and operating results. The level and nature of the disruption caused by COVID-19, or any future pandemic is unpredictable, may be cyclical and long-lasting, may vary from location to location and may have a material adverse impact on our operations and financial condition and results.

If we are not successful in attracting and retaining highly qualified personnel, we may not be able to successfully implement our business strategy.

Our ability to implement our business plan depends in large part upon our ability to attract and retain highly qualified managerial and engineering personnel. We will need to hire additional personnel as we further develop our products. Competition for skilled personnel in our market is intense and competition for experienced engineers may limit our ability to hire and retain highly qualified personnel on acceptable terms. Despite our efforts to retain valuable employees, members of our management and engineering teams may terminate their employment with us on short notice. The loss of the services of any of our executive officers or other key employees could potentially harm our business, operating results or financial condition. Currently, we do not maintain key man insurance policies with respect to any of our executive officers or employees.

Our success also depends on our ability to continue to attract, retain and motivate highly skilled junior, mid-level and senior managers as well as junior, mid-level and senior engineering personnel. Other technology companies with which we compete for qualified personnel have greater financial and other resources, different risk profiles and longer histories than we have. They also may provide more diverse opportunities and better chances for career advancement. Some of these characteristics may be more appealing to high-quality candidates than what we have to offer. If we are unable to continue to attract and retain high-quality personnel, the rate and success at which we can develop and commercialize products would be limited.

We are subject to risks associated with our utilization of consultants.

To improve productivity and accelerate our development efforts while we build out our own engineering team, we use experienced consultants to assist in selected business functions, including the development of our integrated circuits. We take steps to monitor and regulate the performance of these independent third parties. However, arrangements with third party service providers may make our operations vulnerable if these consultants fail to satisfy their obligations to us as a result of their performance, changes in their own operations, financial condition or other matters outside of our control. Effective management of our consultants is important to our business and strategy. The failure of our consultants to perform as anticipated could result in substantial costs, divert management’s attention from other strategic activities or create other operational or financial problems for us. Terminating or transitioning arrangements with key consultants could result in additional costs and a risk of operational delays, potential errors and possible control issues as a result of the termination or during the transition.

We will need to grow the size of our organization, and we may experience difficulties in managing this growth.

As we expand our activities, there will be additional demands on our financial, technical, operational and management resources. To manage our anticipated future growth, we must continue to implement and improve our financial, technical, operational and management systems and continue to recruit and train additional qualified personnel. Due to our limited financial resources and operating history, we may not be able to effectively manage the expansion of our operations or recruit and train additional qualified personnel. The expansion of our operations may lead to significant costs and may divert our management and business development resources. Any inability to manage growth could delay the execution of our business plans or disrupt our operations.

We may acquire businesses or products, or form strategic alliances, in the future, and we may not realize the benefits of such acquisitions.

We may acquire additional businesses or products, form strategic alliances or create joint ventures with third parties that we believe will complement or augment our existing business. If we acquire businesses with promising markets or technologies, we may not be able to realize the benefit of acquiring such businesses if we are unable to successfully integrate them with our existing operations and company culture. We may encounter numerous difficulties in developing, manufacturing and marketing any new products resulting from a strategic alliance or acquisition that delay or prevent us from realizing their expected benefits or enhancing our business. We cannot assure you that, following any such acquisition, we will achieve the expected synergies to justify the transaction.

Our business is affected by macroeconomic conditions.

Various macroeconomic factors could adversely affect our business and the results of our operations and financial condition, including changes in inflation, interest rates and foreign currency exchange rates and overall economic conditions and uncertainties, including those resulting from the current and future conditions in the global financial markets. Cost inflation, including increases in raw material prices, labor rates, and transportation costs may impact our profitability. Global financial markets and the banking sector can experience extreme volatility, disruption and credit contraction, which adversely affect global economic conditions. The volatility of the capital markets could also affect the value of our investments and our ability to liquidate our investments in order to fund our operations.

Increasing interest rates, reduced access to capital markets and bank failures could also adversely affect the ability of our suppliers, OEMs, VARs, distributors, licensors, collaborators and other strategic partners to remain effective business partners or to remain in business. The loss of a strategic partner, or a failure to perform by a strategic partner, could have a disruptive effect on our business and could adversely affect our results of operations.

The ongoing military action by Russia in Ukraine could have negative impact on the global economy which could materially adversely affect our business, operations, operating results and financial condition.

On February 24, 2022, Russian forces launched significant military action against Ukraine, and sustained conflict and disruption in the region is possible. The impact to Ukraine as well as actions taken by other countries, including new and stricter sanctions imposed by Canada, the United Kingdom, the European Union, the United States and other countries and companies and organizations against officials, individuals, regions, and industries in Russia and Ukraine, and actions taken by Russia in response to such sanctions, and each country’s potential response to such sanctions, tensions, and military actions could adversely affect the global economy and financial markets and thus could affect our business, operations, operating results and financial condition as well as the price of our common stock and our ability to raise additional capital when needed on acceptable terms. The extent and duration of the military action, sanctions and resulting market disruptions, including supply chain disruptions, are impossible to predict, but could be substantial. Any such disruptions caused by Russian military action or resulting sanctions may magnify the impact of other risks described in this Annual Report on Form 10-K.

Our business and operations are subject to risks related to climate change.

The effects of global climate change present risks to our business. Natural disasters, extreme weather and other conditions caused by or related to climate change could adversely impact our supply chain, the availability and cost of raw materials and components, energy supply, transportation, or other inputs necessary for the operation of our business. Climate change and natural disasters could also result in physical damage to our facilities as well as those of our suppliers, and strategic partners, which could cause disruption in our business and operations. Our facilities and our equipment would be costly to replace and could require substantial lead time to repair or replace. Although we believe we possess adequate insurance for the disruption of our business related to climate change, such insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all.

Our business could be negatively impacted by corporate social responsibility and sustainability matters.

There has been an increased focus from investors, customers, employees and other stakeholders concerning corporate social responsibility and sustainability matters, which may result in increases in our costs to operate our business or restrict certain aspects of our activities. The standards by which corporate social responsibility and sustainability efforts and related matters are measured are developing and evolving, and certain areas are subject to assumptions that could change over time. In addition, we could be criticized for the scope of such initiatives or goals or perceived as not acting responsibly in connection with these matters. Any such matters could have a material adverse impact on our future results of operations, financial position and cash flows.

Risks Related to Product Development, Manufacturing and Commercialization

We are highly dependent on the success of our proposed solution and cannot give any assurance that it will receive regulatory approval or clearance or be successfully commercialized.

We are highly dependent on the success of our initial solution under development. There is no guarantee that we will be successful in the development of this or any other future product. While we may commercialize our first iteration of the Evie Ring without FDA clearance, subsequent iterations of our proposed solution will require substantial additional clinical development, extensive preclinical testing and clinical trials in order to receive regulatory clearance or approval. We cannot give any assurance that our proposed solution will receive regulatory clearance or approval or be successfully commercialized. Any failure to obtain regulatory clearance or approval of or to successfully commercialize the proposed solution would have a material adverse effect on our business.

We expect to depend on strategic partners such as third-party OEMs, VARs and other distributors to complete the design, manufacture, market and distribute our product under development or other future products. If these strategic partners fail to successfully complete the design, manufacture, market or distribute our product under development or other future products, our business will be materially harmed.

The products that we intend to develop are complex and will require the integration of a number of components that are themselves complex. In light of this complexity, we expect that we may determine not to complete the design of or manufacture these products ourselves and instead develop relationships with suitable third-party OEMs to complete these tasks. Similarly, we do not anticipate building a sales or marketing function and instead expect that our products under development will be marketed and sold through strategic partners such as OEMs, VARs or other distributors. We do not currently have a relationship with any OEM, VAR or other distributor, and may never be able to find any OEMs, VARs or other distributors that are willing to work with us on acceptable terms, or at all. We will have limited control over the efforts and resources that any third-party OEMs, VARs and other distributors would devote to designing, manufacturing, marketing or distributing our products under development. An OEM may not be able to successfully design and manufacture our products and such failure by an OEM could substantially harm the value of our business. Similarly, the OEMs, VARS or other distributors we engage with to market and sell our product under development may not be successful at marketing and selling such product. If we cannot find suitable strategic partners or our strategic partners do not perform as expected, our potential for revenue may be dramatically reduced and our business could be harmed.

Our business and operations would suffer in the event of information technology system failures, including cyber-attacks.

Our information technology computer systems, as well as those of our contractors and consultants, are vulnerable to damage from computer viruses, unauthorized access, natural disasters (including earthquakes), terrorism, war and telecommunication and electrical failures. If such an event were to occur and cause interruptions in our operations, it could result in a material disruption of our development programs. In the ordinary course of our business, we collect and store sensitive data, including intellectual property, proprietary business information, personal data and personally identifiable information of our clinical trial subjects and employees, on our networks. The secure processing, maintenance and transmission of this information is critical to our operations. High-profile security breaches at other companies and in government agencies have increased in recent years, and security industry experts and government officials have warned about the risks of hackers and cyber-attacks targeting businesses such as ours. Cyber-attacks are becoming more sophisticated and frequent, and in some cases have caused significant harm. Computer hackers and others routinely attempt to breach the security of technology products, services and systems, and to fraudulently induce employees, customers, or others to disclose information or unwittingly provide access to systems or data. While we devote significant resources to security measures to protect our systems and data, these measures cannot provide absolute security, and our information technology and infrastructure may be vulnerable to attacks by hackers or internal bad actors, or breached due to employee error, a technical vulnerability, malfeasance or other disruptions. Although, to our knowledge, we have not experienced any such material security breach to date, any such breach could compromise our networks and the information stored there could be accessed, publicly disclosed, lost or stolen. Any such access, disclosure or other loss of information could result in legal claims or proceedings, liability under laws that protect the privacy of personal information and significant regulatory penalties, and such an event could disrupt our operations, damage our reputation and cause a loss of confidence in us and our ability to conduct clinical trials, which could adversely affect our reputation and delay our development of our products.

Risks Related to Intellectual Property and Other Legal Matters

It is difficult and costly to protect our intellectual property and our proprietary technologies, and we may not be able to ensure their protection.

Our success depends significantly on our ability to obtain, maintain and protect our proprietary rights to the technologies used in our products. Patents and other proprietary rights provide uncertain protections, and we may be unable to protect our intellectual property. As of December 31, 2022, we own, jointly own, or have exclusive rights to 16 issued and in-force patents (that cover one or more of our products or product candidates for method, system and device development). Furthermore, as of December 31, 2022, we own, jointly own, or have exclusive rights to 38 pending U.S. patent applications, 4 pending foreign patent applications, and one pending PCT International patent application.

While we plan to file additional patent applications, we may never develop any invention that results in any additional issued patents. Even if we obtain patents, we may be unsuccessful in defending our patents (and other proprietary rights) against third party challenges. Although we expect to attempt to obtain patent coverage for our technology where available and where we believe appropriate, there may be aspects of the technology for which patent coverage may never be sought or received. We may not possess the resources to or may not choose to pursue patent protection outside the United States or any or every country other than the United States where we may eventually decide to sell our future products. Our ability to prevent others from making or selling duplicate or similar technologies will be impaired in those countries in which we have no patent protection.

Any patent applications we have filed or may file in the future may never result in issued patents, or patents issued based upon such applications may issue only with limited coverage or may issue and be subsequently successfully challenged by others and held invalid or unenforceable. There may exist prior art that may prevent our patent applications from resulting in issued patents, and there may be other inventors who file patent applications on inventions that are the same or similar to ours or that otherwise may be found to anticipate our inventions before we file patent applications of our own on our inventions, which may result in the issue of patents on our inventions or similar or anticipatory inventions to those other inventors.

Even if patents issue based on our current or any future applications, any issued patents may not provide us with any competitive advantages. Competitors may be able to design around our patents or develop products that provide outcomes comparable or superior to ours. Our patents may be held invalid or unenforceable as a result of legal challenges by third parties, and others may challenge the inventorship or ownership of our patents and pending patent applications. In addition, if we choose to and are able to secure protection in countries outside the United States, the laws of some foreign countries may not protect our intellectual property rights to the same extent as do the laws of the United States. In the event a competitor infringes upon our patents or other intellectual property rights, enforcing those rights may be difficult, expensive and time consuming and we may elect not to enforce our patents or other intellectual property rights based on the facts and circumstances known to us at the time. Even if successful, litigation to enforce our intellectual property rights or to defend our patents against challenge could be expensive and time consuming and could divert our management’s attention. We may not have sufficient resources to enforce our intellectual property rights or to defend our patents against a challenge.

If we are unable to protect the confidentiality of our proprietary information and know-how, the value of our technology and products could be adversely affected.

In addition to our patent activities, we rely upon, among other things, unpatented proprietary technology, processes, trade secrets and know-how. Any involuntary disclosure to or misappropriation by third parties of our confidential or proprietary information could enable competitors to duplicate or surpass our technological achievements, potentially eroding our competitive position in our market. While we require all of our employees, consultants, advisors and any third parties who have access to our proprietary know-how, information and technology to enter into confidentiality agreements, we cannot be certain that this know-how, information and technology will not be disclosed or that competitors will not otherwise gain access to our trade secrets or independently develop substantially equivalent information and techniques. These agreements may be terminated or breached, and we may not have adequate remedies for any such termination or breach. Furthermore, these agreements may not be enforceable or provide meaningful protection for our trade secrets and know-how in the event of unauthorized use or disclosure. The disclosure of trade secrets or other proprietary information would impair our competitive position and may materially harm our business.

We may in the future be a party to intellectual property litigation or administrative proceedings that could be costly and could interfere with our ability to develop our products.

Because our industry is characterized by competing intellectual property, we may be sued for violating the intellectual property rights of others. Determining whether a product infringes a patent involves complex legal and factual issues, and the outcome of patent litigation actions is often uncertain. We have not conducted any significant search of patents issued to third parties, and no assurance can be given that third party patents containing claims covering our product under development, parts of our product under development, technology or methods do not exist, have not been filed, or could not be filed or issued. Because of the number of patents issued and patent applications filed in our technical areas or fields, our competitors or other third parties may assert that our products and the methods we plan to employ in the use of our products are covered by United States or foreign patents held by them. In addition, because patent applications can take many years to issue and because publication schedules for pending applications vary by jurisdiction, there may be applications now pending of which we are unaware, and which may result in issued patents that our product under development or other future products would infringe. Also, because the claims of published patent applications can change between publication and patent grant, there may be published patent applications that may ultimately issue with claims that we infringe. There could also be existing patents that one or more of our future products or parts may infringe and of which we are unaware. As the number of competitors in our market increases, and as the number of patents issued in this area grows, the possibility of patent infringement claims against us increases. Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. In addition, any uncertainties resulting from the initiation and continuation of any litigation could have a material adverse effect on our ability to raise the funds necessary to continue our operations.

In the event that we become subject to a patent infringement or other intellectual property lawsuit and if the relevant patents or other intellectual property were upheld as valid and enforceable and we were found to infringe or violate the terms of a license to which we are a party, we could be prevented from selling any infringing products of ours unless we could obtain a license or were able to redesign the product to avoid infringement. If we were unable to obtain a license or successfully redesign, we might be prevented from selling our product under development or other future products. If there is an allegation or determination that we have infringed the intellectual property rights of a competitor or other person, we may be required to pay damages, or a settlement or ongoing royalties. In these circumstances, we may be unable to sell our products at competitive prices or at all, and our business could be harmed.

We do and may employ and contract with individuals who were previously employed by other technology companies. Although we seek to protect our ownership of intellectual property rights by ensuring that our agreements with our employees, collaborators and other third parties with whom we do business include provisions requiring such parties to assign rights in inventions to us and to not use the know-how or confidential information of their former employer or other third parties, we cannot guarantee that we have executed such agreements with all applicable parties. We may be subject to claims that we or our employees, consultants or independent contractors have inadvertently or otherwise used or disclosed confidential information of our employees’ former employers or other third parties. We may also be subject to claims that former employers or other third parties have an ownership interest in our patents. Litigation may be necessary to defend against these claims. There is no guarantee of success in defending these claims, and if we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable personnel or intellectual property rights, such as exclusive ownership of, or right to use, valuable intellectual property. Even if we are successful, litigation could result in substantial cost and be a distraction to our management and other employees.

In addition, while it is our policy to require our employees, contractors and other third parties who may be involved in the conception or development of intellectual property to execute agreements assigning such intellectual property to us, we may be unsuccessful in executing such an agreement with each party who, in fact, conceives or develops intellectual property that we regard as our own. The assignment of intellectual property rights under such agreements may not be self-executing, or the assignment agreements may be breached, and we may be forced to bring claims against third parties, or defend claims that they may bring against us, to determine the ownership of what we regard as our intellectual property. Any of the foregoing could have a material adverse effect on our business, financial condition, results of operations and prospects.

We could become subject to product liability claims, product recalls and warranty claims that could be expensive, divert management’s attention and harm our business.

Our business exposes us to potential liability risks that are inherent in the manufacturing, marketing and sale of products used by consumers. We may be held liable if our product under development or other future products cause injury or death or are found otherwise unsuitable during usage. Our future products to be developed are expected to incorporate sophisticated components and computer software. Complex software can contain errors, particularly when first introduced. In addition, new products or enhancements may contain undetected errors or performance problems that, despite testing, are discovered only after installation. While we believe our technology will be safe, because our proposed solution is an RF-based technology that is being designed to be used in close proximity to users, users may allege or possibly prove defects, some of which could be alleged or proved to cause harm to users or others. A product liability claim, regardless of its merit or eventual outcome, could result in significant legal defense costs. We cannot guarantee that we will be able to obtain products liability insurance; if we do, however, the coverage limits of any insurance policies that we may choose to purchase to cover related risks may not be adequate to cover future claims, and the cost of insurance, if obtainable, could be prohibitive. If sales of our products increase or we suffer future product liability claims, we may be unable to maintain product liability insurance in the future at satisfactory rates or with adequate amounts. A product liability claim, any product recalls or excessive warranty claims, whether arising from defects in design or manufacture or otherwise, could negatively affect our sales or require a change in the design or manufacturing process, any of which could harm our reputation and result in a decline in revenue, each of which would harm our business.

In addition, if a product we designed or manufactured is defective, whether due to design or manufacturing defects, improper use of the product or other reasons, we may be required to notify regulatory authorities and/or to recall the product. A required notification to a regulatory authority or recall could result in an investigation by regulatory authorities of our products, which could in turn result in required recalls, restrictions on the sale of the products or other penalties. The adverse publicity resulting from any of these actions could adversely affect the perception of customers and potential customers. These investigations or recalls, especially if accompanied by unfavorable publicity, could result in our incurring substantial costs, losing revenues and damaging our reputation, each of which would harm our business.

Risks Related to Regulation

We expect to seek FDA clearance or approval for our planned solution, which may be difficult to achieve, and existing laws or regulations or future legislative or regulatory changes may affect our business.

While we may commercialize our first iteration of the Evie Ring without FDA clearance, we expect subsequent iterations of our proposed solution will be subject to current and future regulation by the FDA and may be subject to regulation by other federal, state and local agencies. These agencies and regulations require manufacturers of medical devices to comply with applicable laws and regulations governing development, testing, manufacturing, labeling, marketing and distribution of medical devices. Devices are generally subject to varying levels of regulatory control, based on the risk level of the device. Governmental regulations specific to medical devices are wide-ranging and govern, among other things:

●

product design, development and manufacture;

●

laboratory, pre-clinical and clinical testing, labeling, packaging, storage and distribution;

●

premarketing clearance or approval;

●

record keeping;

●

product marketing, promotion and advertising, sales and distribution; and

●

post-marketing surveillance, including reporting of deaths, serious injuries and certain malfunctions, as well as corrections and removals (recalls).

Before a new medical device or a new intended use for an existing product can be marketed in the United States, a company must first submit and receive either 510(k) clearance or PMA from FDA, unless an exemption applies. The typical duration to receive a 510(k) clearance is approximately nine to twelve months from the date of the initial 510(k) submission and the typical duration to receive a PMA approval is approximately two years from the date of submission of the initial PMA application, although there is no guarantee that the timing will not be longer.

Our end goal is to bring to market a solution that would be classified as a Class II medical device that will require a 510(k) clearance prior to marketing. In some instances, the 510(k) pathway for product marketing may be used with only proof of substantial equivalence in technology for a given indication with a lawfully marketed device (a “predicate device”). In other instances, FDA may require additional clinical work to prove efficacy in addition to technological equivalence and basic safety. Whether clinical data is provided or not, FDA may decide to reject the substantial equivalence argument we present. If that happens, our device would be automatically designated as a Class III device and we would have to fulfill the more rigorous PMA requirements or request a “de novo” reclassification of the device into Class I or II. Thus, although at this time we do not anticipate that we will be required to do so, it is possible that one or more of our planned products may require PMA approval de novo reclassification.

We may not be able to obtain the necessary clearances or approvals or may be unduly delayed in doing so, which could harm our business. Furthermore, even if we are granted regulatory clearances or approvals, they may include significant limitations on the indicated uses for the product, which may limit the market for the product. Delays in obtaining clearance or approval could increase our costs and harm our revenues and growth.

In addition, we will be required to timely file various reports with FDA, including reports required by the medical device reporting regulations that require us to report to FDA if our devices may have caused or contributed to a death or serious injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if the malfunction were to recur. If these reports are not filed timely, regulators may impose sanctions and sales of our products may suffer, and we may be subject to regulatory enforcement actions, all of which could harm our business.

If we initiate a correction or removal for one of our devices to reduce a risk to health posed by the device, we would be required to submit a publicly available Correction and Removal report to FDA and, in many cases, similar reports to other regulatory agencies. This report could be classified by FDA as a device recall which could lead to increased scrutiny by FDA, other international regulatory agencies and our customers regarding the quality and safety of our devices. Furthermore, the submission of these reports has been and could be used by competitors against us in competitive situations and cause customers to delay purchase decisions or cancel orders and would harm our reputation.

FDA and FTC also regulate the advertising and promotion of our products to ensure that the claims we make are consistent with our regulatory clearances, that there are adequate and reasonable data to substantiate the claims and that our promotional labeling and advertising is neither false nor misleading in any respect. If FDA or FTC determines that any of our advertising or promotional claims are misleading, not substantiated or not permissible, we may be subject to enforcement actions, including warning letters, and we may be required to revise our promotional claims and make other corrections or restitutions.

FDA and state authorities have broad enforcement powers. Our failure to comply with applicable regulatory requirements could result in enforcement action by FDA or state agencies, which may include any of the following sanctions:

●

adverse publicity, warning letters, fines, injunctions, consent decrees and civil penalties;

●

repair, replacement, refunds, recall or seizure of our products;

●

operating restrictions, partial suspension or total shutdown of production;

●

refusing our requests for 510(k) clearance or PMA of new products, new intended uses or modifications to existing products;

●

withdrawing 510(k) clearance or PMAs that have already been granted;

●

refusal of importation or exportation; and

●

criminal prosecution and/or civil penalties.

If any of these events were to occur, our business and financial condition would be harmed.

The cost of compliance with new laws or regulations governing our technology or future products could adversely affect our financial results. New laws or regulations may impose restrictions or obligations on us that could force us to redesign our technology under development or other future products and may impose restrictions that are not possible or practicable to comply with, which could cause our business to fail. We cannot predict the impact on our business of any legislation or regulations related to our technology or future products that may be enacted or adopted in the future.

The manufacturing processes of third-party OEMs are required to comply with FDA’s Quality System Regulations and other regulatory bodies’ equivalent regulations, which cover the procedures and documentation of the design, testing, production, control, quality assurance, labeling, packaging, storage and shipping of our planned non-invasive solution. They may also be subject to similar state requirements and licenses and engage in extensive recordkeeping and reporting and make available their manufacturing facilities and records for periodic unannounced inspections by governmental agencies, including FDA, state authorities and comparable agencies in other countries. If any OEM fails such an inspection, our operations could be disrupted and our manufacturing interrupted. Failure to take adequate corrective action in response to an adverse inspection could result in, among other things, a shut-down of our manufacturing operations, significant fines, suspension of marketing clearances and approvals, seizures or recalls of our products, operating restrictions and criminal prosecutions, any of which would cause our business to suffer. Furthermore, these OEMs may be engaged with other companies to supply and/or manufacture materials or products for such companies, which would expose our OEMs to regulatory risks for the production of such materials and products. As a result, failure to meet the regulatory requirements for the production of those materials and products may also affect the regulatory clearance of a third-party manufacturer’s facility. If FDA determines that any of the facilities that manufacture our proposed solution are not in compliance with applicable requirements, we may need to find alternative manufacturing facilities, which would impede or delay our ability to develop, obtain regulatory clearance or approval for, or market our proposed solution, if developed and approved. Additionally, our key component suppliers may not currently be or may not continue to be in compliance with applicable regulatory requirements, which may result in manufacturing delays for our product and cause our results of operations to suffer.

We expect our planned solution to be subject to certain Federal Communication Commission (“FCC”) regulations.

Our planned solution may in the future be subject to product recalls that could harm our reputation.

Regulatory agencies have the authority to require the recall of commercialized products in the event of material regulatory deficiencies or defects in design or manufacture. A government-mandated or voluntary recall by us could occur as a result of component failures, manufacturing errors or design or labeling defects. Recalls of our planned solution would divert management’s attention, be expensive, harm our reputation with customers and harm our financial condition and results of operations. A recall announcement would also negatively affect the price of our securities.

Healthcare reform measures could hinder or prevent our planned solution’s commercial success.

There have been, and we expect there will continue to be, a number of legislative and regulatory changes to the healthcare system in ways that could harm our future revenues and profitability and the future revenues and profitability of our potential customers. Federal and state lawmakers regularly propose and, at times, enact legislation that would result in significant changes to the healthcare system, some of which are intended to contain or reduce the costs of medical products and services. For example, one of the most significant healthcare reform measures in decades, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Affordability Reconciliation Act (the “Affordable Care Act”), was enacted in 2010. The Affordable Care Act contains a number of provisions, including those governing enrollment in federal healthcare programs, reimbursement changes and fraud and abuse measures, all of which may impact existing government healthcare programs and result in the development of new programs. The Affordable Care Act imposed a 2.3 percent excise tax on sales of medical devices. The excise tax was suspended by statute twice before being repealed in December 2019. While this tax has been repealed, Congress could enact future legislation or further change the law related to the medical devise excise tax in a manner that could negatively impact our operating results. The financial impact such future taxes could have on our business is unclear.

Other significant measures contained in the Affordable Care Act include research on the comparative clinical effectiveness of different technologies and procedures, initiatives to revise Medicare payment methodologies, such as bundling of payments across the continuum of care by providers and physicians, and initiatives to promote quality indicators in payment methodologies. The Affordable Care Act also includes significant new fraud and abuse measures, including required disclosures of financial payments to and arrangements with physician customers, lower thresholds for violations and increasing potential penalties for such violations.

Since its enactment, there have been judicial and Congressional challenges to certain aspects of the Affordable Care Act. It remains unclear whether changes will be made to the Affordable Care Act, or whether it will be repealed or materially modified. There likely will continue to be legislative and regulatory proposals at the federal and state levels directed at containing or lowering the cost of healthcare. We cannot predict the initiatives that may be adopted in the future or their full impact. The continuing efforts of the government, insurance companies, managed care organizations and other payers of healthcare services to contain or reduce costs of healthcare may harm our ability to set a price that we believe is fair for our products, our ability to generate revenues and achieve or maintain profitability and the availability of capital.

Even though we do not and will not control referrals of healthcare services or bill directly to Medicare, Medicaid or other third party payers, certain federal and state healthcare laws and regulations pertaining to fraud and abuse and patients’ rights will be applicable to our business. We could be subject to healthcare fraud and abuse and patient privacy regulation by both the federal government and the states in which we conduct our business. The regulations that will affect how we operate include:

●

the federal healthcare program Anti-Kickback Statute, which prohibits, among other things, any person from knowingly and willfully offering, soliciting, receiving or providing remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual for, or the purchase, order or recommendation of, any good or service for which payment may be made under federal healthcare programs, such as the Medicare and Medicaid programs;

●

the federal False Claims Act, which prohibits, among other things, individuals or entities from knowingly presenting, or causing to be presented, false claims, or knowingly using false statements, to obtain payment from the federal government;

●

federal criminal laws that prohibit executing a scheme to defraud any healthcare benefit program or making false statements relating to healthcare matters;

●

the federal Physician Payment Sunshine Act, created under the Affordable Care Act, and its implementing regulations, which require manufacturers of drugs, medical devices, biologicals and medical supplies for which payment is available under Medicare, Medicaid or the Children’s Health Insurance Program to report annually to the U.S. Department of Health and Human Services information related to payments or other transfers of value made to physicians and teaching hospitals, as well as ownership and investment interests held by physicians and their immediate family members;

●

the Health Insurance Portability and Accountability Act of 1996, as amended by the Health Information Technology for Economic and Clinical Health Act, which governs the conduct of certain electronic healthcare transactions and protects the security and privacy of protected health information; and

●

state law equivalents of each of the above federal laws, such as anti-kickback and false claims laws, which may apply to items or services reimbursed by any third-party payer, including commercial insurers.

The Affordable Care Act, among other things, amends the intent requirement of the Federal Anti-Kickback Statute and criminal healthcare fraud statutes. A person or entity no longer needs to have actual knowledge of this statute or specific intent to violate it. In addition, the Affordable Care Act provides that the government may assert that a claim including items or services resulting from a violation of the Federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the False Claims Act.

Efforts to ensure that our business arrangements will comply with applicable healthcare laws may involve substantial costs. It is possible that governmental and enforcement authorities will conclude that our business practices do not comply with current or future statutes, regulations or case law interpreting applicable fraud and abuse or other healthcare laws and regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of civil, criminal and administrative penalties, damages, disgorgement, monetary fines, possible exclusion from participation in Medicare, Medicaid and other federal and similar foreign healthcare programs, contractual damages, reputational harm, diminished profits and future earnings and curtailment of our operations, any of which could harm our ability to operate our business and our results of operations.

Risks Related to Owning Our Securities and Our Financial Results

Our quarterly and annual results may fluctuate significantly, may not fully reflect the underlying performance of our business and may result in decreases in the price of our securities.

Our financial condition and operating results may fluctuate significantly from quarter-to-quarter and year-to-year due to a variety of factors, some of which are beyond our control. Our operating results will be affected by numerous factors such as:

●

variations in the level of expenses related to our proposed products;

●

status of our product development efforts;

●

execution of collaborative, licensing or other arrangements, and the timing of payments received or made under those arrangements;

●

intellectual property prosecution and any infringement lawsuits to which we may become a party;

●

regulatory developments affecting our products or those of our competitors;

●

our ability to obtain and maintain FCC clearance and/or FDA approval for our products, which have not yet been approved for marketing;

●

our ability to commercialize our products;

●

market acceptance of our products;

●

the timing and success of new products and feature introductions by us or our competitors or any other change in the competitive dynamics of our industry, including consolidation among competitors, customers or strategic partners;

●

the amount and timing of costs and expenses related to the maintenance and expansion of our business and operations;

●

general economic, industry and market conditions;

●

the hiring, training and retention of key employees, including our ability to develop a sales team;

●

litigation or other claims against us;

●

our ability to obtain additional financing;

●

business interruptions caused by events such as pandemics and natural disasters; and

●

advances and trends in new technologies and industry standards.

Any or all of these factors could adversely affect our cash position requiring us to raise additional capital, which may be on unfavorable terms and result in substantial dilution.

Our disclosure controls and procedures may not prevent or detect all errors or acts of fraud.

We are subject to the periodic reporting requirements of the Exchange Act, and are required to maintain disclosure controls and procedures that are designed to reasonably assure that information required to be disclosed by us in reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified by the rules and forms of the SEC, and that such information is accumulated and communicated to management to allow timely decisions regarding required disclosure.

As a public company, we are required to maintain internal control over financial reporting and to report any material weaknesses in those internal controls. Such internal controls are designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of a company’s annual or interim financial statements will not be prevented or detected on a timely basis. We have identified a material weakness in our internal control over financial reporting at December 31, 2022. The material weakness relates to the ineffective design and operation of our financial close and reporting controls. Although we are making efforts to remediate this issue, these efforts may not be sufficient to avoid similar material weaknesses in the future. Designing and implementing internal controls over financial reporting may be time consuming, costly and complicated as we are a small organization with limited management resources.

If the material weakness in our internal controls is not fully remediated or if additional material weaknesses are identified, those material weaknesses could cause us to fail to meet our future reporting obligations, reduce the market’s confidence in our consolidated financial statements, harm our stock price and subject us to sanctions or investigations by Nasdaq, the SEC or other regulatory authorities. In addition, our common stock may not be able to remain listed on Nasdaq or any other securities exchange.

For as long as we are an “emerging growth company,” as defined in the JOBS Act, or a non-accelerated filer, as defined in Rule 12b-2 under the Exchange Act, our auditors will not be required to attest as to our internal control over financial reporting. If we continue to identify material weaknesses in our internal control over financial reporting, are unable to comply with the requirements of Section 404 in a timely manner, are unable to assert that our internal control over financial reporting is effective or, once required, our independent registered public accounting firm is unable to attest that our internal control over financial reporting is effective, investors may lose confidence in the accuracy and completeness of our financial reports and the market price of our common stock could decrease. We could also become subject to stockholder or other third-party litigation as well as investigations by the securities exchange on which our securities are listed, the SEC or other regulatory authorities, which could require additional financial and management resources and could result in fines, trading suspensions or other remedies.

Any control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud will be detected.

The issuance of additional stock in connection with financings, acquisitions, our equity incentive plan, upon exercise of outstanding warrants or otherwise will dilute our existing stockholders.

If we issue additional equity securities, our existing stockholders’ percentage ownership will be reduced and these stockholders may experience substantial dilution. We may also issue equity securities that provide for rights, preferences and privileges senior to those of our common stock. Subject to compliance with applicable rules and regulations, we may issue our shares of common stock in connection with a financing, acquisition, our equity incentive plan, upon exercise of outstanding warrants or otherwise. Any such issuance could result in substantial dilution to our existing stockholders and cause the trading price of our common stock to decline.

Our stock price has fluctuated widely and is likely to continue to be volatile.

The market price for our common stock varied between a high of $4.11 and a low of $1.27 in the twelve-month period ended December 31, 2022. Our stock price is likely to continue to be volatile and subject to significant price and volume fluctuations in response to market and other factors, including those listed in this “Item 1A. Risk Factors” section and other, unknown factors. Among numerous other factors, our stock price also may be affected by:

●

actual or anticipated fluctuations in our quarterly or annual operating results;

●

changes in financial or operational estimates or projections;

●

conditions in markets generally;

●

changes in the economic performance or market valuations of companies similar to ours; and

●

general economic or political conditions in the United States or elsewhere.

In particular, the market prices of technology companies like ours have been highly volatile due to factors, including, but not limited to:

●

any delay or failure to commercialize products acceptable to the market;

●

developments or disputes concerning our product’s intellectual property rights;

●

our or our competitors’ technological innovations;

●

changes in market valuations of similar companies;

●

announcements by us or our competitors of significant contracts, acquisitions, strategic partnerships, joint ventures, capital commitments, new technologies, or patents; and

●

failure to complete significant transactions or collaborate with vendors in manufacturing our product.

Any of these factors may result in large and sudden changes in the volume and trading price of our common stock. The stock market, generally, has from time to time experienced significant price and volume fluctuations that are not related to the operating performance of particular companies. These market fluctuations may also materially and adversely affect the market price of shares of our common stock.

The daily trading volume of our common stock has historically been relatively low. If we are unable to develop and maintain a liquid market for our common stock, our shareholders may not be able to sell common stock at prices they consider to be fair or at times that are convenient, or at all. This situation may be attributable to a number of factors, including but not limited to the fact that we are a development-stage company that is relatively unknown to stock analysts, stock brokers, institutional investors, and others in the investor community. In addition, investors may be risk averse to investments in development-stage companies. The low trading volume is outside of our control and may not increase or, if it increases, may not be maintained. In addition, following periods of volatility in the market price of a company’s securities, litigation has often been brought against that company and we may become the target of litigation as a result of price volatility. Litigation could result in substantial costs and divert our management’s attention and resources from our business. This could have a material adverse effect on our business, results of operations and financial condition.

Our failure to meet the continued listing requirements of Nasdaq could result in a de-listing of our common stock.

Our common stock is listed on Nasdaq Capital Market. If we fail to satisfy the continued listing requirements of Nasdaq, such as the corporate governance requirements or the minimum closing bid price requirement, Nasdaq may take steps to delist our common stock. Such a delisting would likely have a negative effect on the price of our common stock and would impair our shareholders’ ability to sell or purchase our common stock. In the event of a delisting, we would take actions to restore our compliance with Nasdaq’s listing requirements, but we can provide no assurance that any such action taken by us would allow our common stock to become listed again, stabilize the market price or improve the liquidity of our common stock, prevent our common stock from dropping below the Nasdaq minimum bid price requirement or prevent future non-compliance with Nasdaq’s listing requirements.

Our Certificate of Incorporation designates specific courts as the exclusive forum for certain litigation that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us.

Our Third Amended and Restated Certificate of Incorporation specifies that, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware will be the sole and exclusive forum for most legal actions involving claims brought against us by stockholders; provided that, the exclusive forum provision will not apply to suits brought to enforce any liability or duty created by the Securities Act, the Exchange Act, the rules and regulations thereunder or any other claim for which the federal courts have exclusive jurisdiction; and provided further that, if and only if the Court of Chancery of the State of Delaware dismisses any such action for lack of subject matter jurisdiction, such action may be brought in another state or federal court sitting in the State of Delaware. Our Certificate of Incorporation further provides that, unless we consent in writing to the selection of an alternative forum, the federal district courts of the United States of America shall, to the fullest extent permitted by law, be the sole and exclusive forum for the resolution of any complaint asserting a cause of action arising under the Securities Act. Any person or entity purchasing or otherwise acquiring any interest in shares of our capital stock shall be deemed to have notice of and to have consented to the provisions of our Certificate of Incorporation described above.

We believe these provisions benefit us by providing increased consistency in the application of Delaware law by chancellors particularly experienced in resolving corporate disputes and in the application of the Securities Act by federal judges, as applicable, efficient administration of cases on a more expedited schedule relative to other forums and protection against the burdens of multi-forum litigation. However, the provisions may have the effect of discouraging lawsuits against our directors, officers, employees and agents as it may limit any stockholder’s ability to bring a claim in a judicial forum that such stockholder finds favorable for disputes with us or our directors, officers, employees or agents. The enforceability of similar choice of forum provisions in other companies’ certificates of incorporation has been challenged in legal proceedings, and it is possible that, in connection with any applicable action brought against us, a court could find the choice of forum provisions contained in our Certificate of Incorporation to be inapplicable or unenforceable in such action. If a court were to find the choice of forum provisions contained in our Certificate of Incorporation to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could adversely affect our business, financial condition or results of operations.

We have not paid dividends in the past and have no immediate plans to pay dividends.

We plan to reinvest all of our earnings, to the extent we have earnings, in order to further develop our technology and potential products and to cover operating costs. We do not plan to pay any cash dividends with respect to our securities in the foreseeable future. We may never generate sufficient surplus cash that would be available for distribution to the holders of our common stock as a dividend. Therefore, our shareholders should not expect to receive cash dividends on the common stock.

Concentration of ownership among our existing executive officers, directors and significant stockholders may prevent new investors from influencing significant corporate decisions.

All decisions with respect to the management of the Company will be made by our board of directors and our officers, who beneficially own approximately 8.1% of our common stock, as calculated in accordance with Rule 13d-3 promulgated under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). In addition, Leabman Holdings LLC and certain trusts established by Emily Fairbairn beneficially own approximately 9.1% and 8.8%, respectively, as calculated in accordance with Rule 13d-3 promulgated under the Exchange Act. As a result, these stockholders will be able to exercise a significant level of control over all matters requiring stockholder approval, including the election of directors, amendment of our Certificate of Incorporation and approval of significant corporate transactions. This control could have the effect of delaying or preventing a change of control of the Company or changes in management, in each case, which other stockholders might find favorable, and will make the approval of certain transactions difficult or impossible without the support of these significant stockholders.

We are an “emerging growth company,” as defined in the JOBS Act, and we expect to take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies” including, but not limited to, (i) being required to present only two years of audited financial statements and related financial disclosure, (ii) not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, (iii) extended transition periods for complying with new or revised accounting standards, (iv) reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements and (v) exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved. We have taken, and in the future may take, advantage of these exemptions until such time that we are no longer an “emerging growth company. We cannot predict if investors will find our common stock less attractive because we rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and the price of our common stock may be more volatile.

We will remain an “emerging growth company” for up to five years, although we will lose that status sooner if our annual revenues exceed $1.07 billion, if we issue more than $1 billion in non-convertible debt in a three-year period, or if the market value of our common stock that is held by non-affiliates exceeds $700 million as of any June 30.

We are incurring significant increased costs as a result of becoming a public company that reports to the SEC and our management is required to devote substantial time to meet compliance obligations.

As a public company listed in the United States, we incur significant legal, accounting and other expenses that we did not incur as a private company. We are subject to reporting requirements of the Exchange Act and the Sarbanes-Oxley Act, as well as rules subsequently implemented by the SEC and Nasdaq that impose significant requirements on public companies, including requiring the establishment and maintenance of effective disclosure and financial controls and changes in corporate governance practices. In addition, the Dodd-Frank Wall Street Reform and Protection Act includes significant corporate governance and executive compensation-related provisions that have and will continue to increase our legal and financial compliance costs, make some activities more difficult, time-consuming or costly and may also place undue strain on our personnel, systems and resources. Our management and other personnel must devote a substantial amount of time to these compliance initiatives. In addition, these rules and regulations may make it more difficult and more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, it may be more difficult for us to attract and retain qualified people to serve on our board of directors, our board committees or as executive officers.

The trading market for our common stock will be influenced by the research and reports that industry or securities analysts publish about us or our business. We do not currently have and may never obtain research coverage by securities and industry analysts. If no or few analysts commence research coverage of us, or one or more of the analysts who cover us issues an adverse opinion about our company, the price of our common stock would likely decline. If one or more of these analysts ceases research coverage of us or fails to regularly publish reports on us, we could lose visibility in the financial markets, which in turn could cause the price of our common stock or trading volume to decline.

Our charter documents and Delaware law may inhibit a takeover that stockholders consider favorable.

Our Certificate of Incorporation and bylaws and applicable provisions of Delaware law may delay or discourage transactions involving an actual or potential change in control or change in our management, including transactions in which stockholders might otherwise receive a premium for their shares, or transactions that our stockholders might otherwise deem to be in their best interests. The provisions in our Certificate of Incorporation and bylaws:

●

authorize our board of directors to issue preferred stock without stockholder approval and to designate the rights, preferences and privileges of each class; if issued, such preferred stock would increase the number of outstanding shares of our common stock and could include terms that may deter an acquisition of us;

●

classifies our board of directors into three classes, with members of each class serving staggered three-year terms;

●

limit who may call stockholder meetings;

●

do not provide for cumulative voting rights;

●

provide that all vacancies may be filled by the affirmative vote of a majority of directors then in office, even if less than a quorum;

●

provide that stockholders must comply with advance notice procedures with respect to stockholder proposals and the nomination of candidates for director;

●

provide that stockholders may only amend our Certificate of Incorporation and Bylaws upon a supermajority vote of stockholders; and

●

provide that the Court of Chancery of the State of Delaware will be the exclusive forum for certain legal claims.

In addition, section 203 of the Delaware General Corporation Law may limit our ability to engage in any business combination with a person who beneficially owns 15% or more of our outstanding voting stock unless certain conditions are satisfied. This restriction lasts for a period of three years following the share acquisition. These provisions may have the effect of entrenching our management team and may deprive our shareholders of the opportunity to sell shares to potential acquirers at a premium over prevailing prices. This potential inability to obtain a control premium could reduce the price of our common stock.

Item 1B. Unresolved Staff Comments

Not applicable.

Item 2. Properties

Our principal office is located at 6800 Koll Center Parkway, Pleasanton, California, and is comprised of office and laboratory space that we occupy pursuant to a lease. See Note 13 Commitments and Contingencies of our consolidated financial statements for further discussion of this lease facility.

Item 3. Legal Proceedings

We are not currently a party to any pending legal proceedings that we believe will have a material adverse effect on our business or financial conditions. We may, however, be subject to various claims and legal actions arising in the ordinary course of business from time to time.

Item 4. Mine Safety Disclosures

Not applicable.

SEC Form 10-K filed by Movano Inc.