bkti_10k.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2023

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from __________ to __________

Commission file number: 001-32644

BK TECHNOLOGIES CORPORATION

(Exact name of registrant as specified in its charter)

Nevada

83-4064262

(State or other jurisdiction of

incorporation or organization)

(I.R.S. Employer

Identification No.)

7100 Technology Drive

West Melbourne, Florida 32904

(Address of principal executive offices) (Zip Code)

Registrant’s telephone number, including area code: (321) 984-1414

Securities registered pursuant to Section 12(b) of the Act:

Title of Each Class		Trading Symbol(s)		Name of Each Exchange on Which Registered
Common Stock, par value $0.60		BKTI		NYSE American

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer	☐	Accelerated filer	☐
Non-accelerated filer	☒	Smaller reporting company	☒
		Emerging growth company	☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant on June 30, 2023, based on the closing price of such stock on the NYSE American on such date, was $43,326,872. As of March 1, 2024, 3,525,002 shares of the registrant’s Common Stock were outstanding.

Documents Incorporated by Reference: Portions of the registrant’s definitive proxy statement for its 2024 annual stockholders’ meeting are incorporated by reference in Part III of this report. The registrant’s definitive proxy statement will be filed with the U.S. Securities and Exchange Commission within 120 days after December 31, 2023.

TABLE OF CONTENTS

		Page
PART I		1

Item 1.	Business.	1
Item 1A.	Risk Factors.	8
Item 1B.	Unresolved Staff Comments.	19
Item 1C.	Cybersecurity.	19
Item 2.	Properties.	20
Item 3.	Legal Proceedings.	20
Item 4.	Mine Safety Disclosures.	20

PART II		21

Item 5.	Market For Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.	21
Item 6.	[Reserved]	22
Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations.	22
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk.	30
Item 8.	Financial Statements and Supplementary Data.	30
Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.	31
Item 9A.	Controls and Procedures.	31
Item 9B.	Other Information.	31
Item 9C.	Disclosure Regarding Foreign Jurisdictions that Prevent Inspections.	31

PART III		32

Item 10.	Directors, Executive Officers and Corporate Governance.	32
Item 11.	Executive Compensation.	32
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.	32
Item 13.	Certain Relationships and Related Transactions, and Director Independence.	32
Item 14.	Principal Accounting Fees and Services.	32

PART IV		33

Item 15.	Exhibits and Financial Statement Schedules.	33
Item 16.	Form 10-K Summary.	34

SIGNATURES		35

Table of Contents

PART I

Item 1. Business.

General

BK Technologies Corporation (NYSE American: BKTI) (together with its wholly owned subsidiaries, “BK,” the “Company,” “we” or “us”) is a holding company that, through BK Technologies, Inc., its operating subsidiary, provides public safety grade communications products and services which make first responders safer and more efficient. All operating activities described herein are undertaken by our operating subsidiary.

In business for over 70 years, BK operates two key business units: Radio and SaaS.

The Radio business unit designs, manufactures and markets wireless communications products consisting of two-way land mobile radios (“LMRs”). Two-way LMRs can be radios that are hand-held (portable) or installed in vehicles (mobile).

Generally, BK Technologies-branded products serve government markets, including, but not limited to, emergency response, public safety, homeland security and military customers of federal, state and municipal government agencies, as well as various industrial and commercial enterprises. We believe that our products and solutions provide superior value by offering a high specification, ruggedized, durable, reliable, feature rich, Project 25 (“P25”) compliant radio at a lower cost relative to comparable offerings.

The SaaS business unit focuses on delivering innovative, public safety smartphone applications which operate ubiquitously over public cellular networks. Our BKRplay branded smartphone application offers multiple services which make the first responder safer and more efficient. When tethered to our radios, the combined solution offers an enhanced user experience with more unique capability which increases the sales reach of our radios.

We were incorporated under the laws of the State of Nevada on October 24, 1997. We are the corporation resulting from the reincorporation merger of our predecessor, Adage, Inc., a Pennsylvania corporation, which reincorporated from Pennsylvania to Nevada effective as of January 30, 1998. Effective on June 4, 2018, we changed our corporate name from “RELM Wireless Corporation” to “BK Technologies, Inc.”

On March 28, 2019, we implemented a holding company reorganization. The reorganization created a new holding company, BK Technologies Corporation, which became the new parent company of BK Technologies, Inc. BK Technologies Corporation’s only significant assets are the outstanding equity interests in BK Technologies, Inc. and any other future subsidiaries of BK Technologies Corporation. The holding company reorganization was intended to create a more efficient corporate structure and increase operational flexibility.

For the purpose of this report, references to “we” or the “Company” or our management or business at any period prior to the holding company reorganization (March 28, 2019) refer to those of BK Technologies, Inc. as the predecessor company and its subsidiaries and thereafter to those of BK Technologies Corporation and its subsidiaries, except as otherwise specified or to the extent the context otherwise indicates.

Our principal executive offices are located at 7100 Technology Drive, West Melbourne, Florida 32904 and our telephone number is (321) 984-1414.

Available Information

Our Internet website address is www.bktechnologies.com. The information contained on our website is not incorporated by reference in this report. We make available on our Internet website, free of charge, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, proxy statements and amendments to these reports as soon as practicable after we file such material with, or furnish it to, the U.S. Securities and Exchange Commission (the “SEC”). In addition, our Code of Business Conduct and Ethics, Code of Ethics for the CEO and Senior Financial Officers, Audit Committee Charter, Compensation Committee Charter, Nominating and Governance Committee Charter and other corporate governance policies are available on our website, under “Investor Relations.” A copy of any of these materials may be obtained, free of charge, upon request from our investor relations department. The SEC maintains an internet site that contains reports, proxy and information statements, and other information filed by the Company at http://www.sec.gov. All reports that the Company files with or furnishes to the SEC also are available free of charge via the SEC’s website.

Table of Contents

Significant Events

On November 6, 2023, the Company entered into a Master Service Agreement (the “EW MSA”) with East West Manufacturing, LLC, a Georgia limited liability company (“EW”), for the manufacturing production of certain land mobile radio (“LMR”) products and accessories. In connection with the EW MSA, the Company and EW also entered into a Transition Services Agreement to govern the transition of manufacturing production to EW. Also, in connection with the EW MSA, the Company and EW entered into a Stock Purchase Agreement, pursuant to which EW purchased 77,520 shares of Common Stock with a value equal to $1,000,000. The number of shares of stock was determined based upon a price per share of $12.90, which is equal to the average of the closing price of the Common Stock on the NYSE American exchange for the 30 most recent trading days prior to November 6, 2023, rounded up to the nearest whole number of shares. Additionally, EW purchased a warrant (“Warrant”), with a five-year term to purchase up to 135,300 shares of Common Stock at an exercise price per share of $15.00.

The Company executed a Reverse Stock Split approved by the board of directors on March 23, 2023, which became effective at 5:00 p.m. Eastern Time on April 21, 2023. Shares of Common Stock underlying outstanding stock options and restricted stock units were proportionately reduced, and the respective exercise prices were proportionately increased in accordance with the terms of the agreements governing such securities. Accordingly, all shares and per share amounts for all periods presented in the accompanying consolidated financial statements and notes thereto have been retroactively adjusted, where applicable, to reflect the Reverse Stock Split.

On March 23, 2023, the board of directors (the “Board” or “Board of Directors”) of the Company approved a one (1)-for-five (5) reverse stock split (the “Reverse Stock Split”) of the Company’s issued and outstanding shares of common stock, par value $0.60 per share (the “Common Stock”), and on April 4, 2023, the Company filed with the Secretary of State of the State of Nevada a Certificate of Change to its Articles of Incorporation to effect the Reverse Stock Split.

On January 31, 2023, the Company entered into a sales agreement (the “Sales Agreement”) with ThinkEquity LLC (the “Sales Agent”), relating to the sale of shares of our Common Stock. In accordance with the terms of the Sales Agreement, we may offer and sell shares of our Common Stock from time to time up to an aggregate offering price of $15,000,000 through or to the Sales Agent, acting as sales agent or principal. After adjusting for the Reverse Stock Split, the number of shares issuable under the terms of the Sales Agreement is 845,070 shares of our Common Stock. The Company intends to use the net proceeds from the offering primarily for general corporate purposes, which may include working capital, capital expenditures, operational purposes, strategic investments and potential acquisitions in complementary businesses. On December 27, 2023, the Company notified the Sales Agent that it was terminating the Sales Agreement as of December 29, 2023, as per the terms of the Sales Agreement. The Company’s “shelf” registration statement on Form S-3 that was filed with the SEC on December 11, 2020, and amended December 21, 2020, expired on December 29, 2023.

On December 17, 2021, a share repurchase program was authorized under which we may repurchase up to an aggregate of $5 million of our Common Stock. Share repurchases under this program were authorized to begin immediately. The program does not have an expiration date. Any repurchases would be funded using cash on hand and cash from operations. The actual timing, manner and number of shares repurchased under the program will be determined by management and the Board of Directors at their discretion, and will depend on several factors, including the market price of our Common Stock, general market and economic conditions, alternative investment opportunities, and other business considerations in accordance with applicable securities laws and exchange rules. The authorization of the share repurchase program does not require BK Technologies to acquire any particular number of shares and repurchases may be suspended or terminated at any time at our discretion.

Industry Overview

LMR end user communications devices consist of hand-held (portable) and vehicle-mounted (mobile) two-way radios commonly used by the public safety sector (e.g., police, fire, and emergency medical responders), military and commercial business concerns (e.g., corporate disaster recovery, hotels, airports, farms, transportation service providers, and construction firms), and government agencies within the U.S. and abroad. LMR systems are constructed to meet an organization’s specific communications needs typically over an operating area which exceeds the direct mode (radio to radio) communications range. The cost of a complete LMR system can vary widely, depending on the size and configuration. Likewise, the cost of end user LMR radios can range from under $100 for a basic analog portable, to thousands of dollars for a fully featured P25 digital unit.

Table of Contents

LMR systems are the most widely used and longest-used form of wireless dispatch communications in the U.S., having been first placed in service in 1921. LMR was initially used almost exclusively by law enforcement, and all radio communications were transmitted in an analog format. Analog transmissions typically consist of a voice or other signal modulated directly onto a continuous radio carrier wave. Over time, advances in technology decreased the cost of LMR products and increased their popularity and usage by businesses and other agencies. Responding to the growing usage, additional radio frequency spectrum was allocated by the Federal Communications Commission (“FCC”) for LMR use.

More recently, growth of the LMR industry has been limited by several factors such as the maturity of markets, funding and budgets for government and public safety agencies, and limited availability of radio frequency spectrum, which hinders existing users in expanding their systems and potential new users from establishing new systems.

Years ago, as a result of the limited spectrum availability, the FCC mandated that new LMR equipment utilize technology that is more spectrum efficient. This effectively meant that the industry had to migrate to digital technology. Responding to the mandate, the Association of Public-Safety Communications Officials-International (“APCO”), the National Association of State Technology Directors (“NASTD”), the United States (“U.S.”) Federal Government and the Telecommunications Industry Association (“TIA”), in concert with several LMR manufacturers, including BK, recommended a standard for digital LMR devices that would meet the FCC spectrum-efficiency requirements and provide solutions to several problems experienced primarily by public safety users. The standard is called Project 25 (“P25”). The primary objectives of P25 are to: (i) allow effective and reliable communication among users of compliant equipment, regardless of its manufacturer, known as interoperability, (ii) maximize radio spectrum efficiency and (iii) promote competition among LMR providers through an open system architecture.

Although the FCC does not require public safety agencies or any radio users to purchase P25 equipment or otherwise adopt the standard, compliance with the standard is a primary consideration for government and public safety purchasers. In addition, U.S. Federal Government grant programs that provide assistance in funding for state and local agencies to purchase interoperable communications equipment for first responders strongly encourage and often require compliance with the P25 standard. Accordingly, although funding for LMR purchases by many government agencies is limited, we believe that, as users upgrade and replace equipment, demand for P25 LMR equipment will continue to grow. Additionally, the P25 standard has also been widely adopted in other countries. The migration to P25 equipment is primarily limited to government and public safety agencies. Radio users in the business and industrial market utilize alternative digital technologies (e.g., Digital Mobile Radio) and analog LMR products.

Presently, the market is dominated by one supplier, Motorola Solutions, Inc., which offers a broader range of products than we do. However, the open architecture of the P25 standard is designed to eliminate the ability of one or more suppliers to lock out competitors. Formerly, because of proprietary characteristics incorporated in many LMR systems, a customer was effectively precluded from purchasing additional LMR products from a supplier other than the initial supplier of the system. Additionally, the system infrastructure technology was prohibitive for smaller suppliers to develop and implement. P25 provides an environment in which users will increasingly have a wider selection of LMR suppliers, including smaller suppliers such as BK.

Today, public safety communications includes both LMR and cellular technologies. LMR is typically used when mission critical or life safety voice communications is required or in direct mode (radio-to-radio) communications applications. Cellular (LTE or 5G) is typically used to support broadband data applications in the field. Since the introduction of broadband data LTE cellular technology by US cellular carriers in 2010, the industry has seen a rapid growth of public safety mobile applications which have made the first responder safer and more efficient.

As cellular coverage continues to improve terrestrially and soon from low earth orbit satellites, the opportunity to further extend mobile applications from public safety vehicles to the first responder’s smartphone opens a new era of services and opportunities.

Table of Contents

Description of Radio Products and P25 CAP Compliance

We offer products under the company brand name BK Technologies. Our KNG Series and BKR Series radios operate in both the P25 digital and analog modes of operations in the Federal Communications Commission (“FCC”) licensed bands; very high frequency (“VHF”) (136MHz - 174MHz), ultra-high frequency (“UHF”) (380MHz - 470MHz, 450MHz - 520MHz), and 700-800 MHz bands.

Our P25 digital technology is compliant with the Project 25 standard for digital LMR equipment. P25 has been adopted by representatives from APCO, NASTD, the United States (“U.S.”) Federal Government and other public safety user organizations.

The Department of Homeland Security’s P25 Compliance Assessment Program (“CAP”) is a voluntary program that allows LMR equipment suppliers to formally demonstrate their products’ compliance with P25 requirements. The purpose of the program is to provide federal, state and local emergency response agencies with evidence that the communications equipment they are purchasing satisfies the P25 standard for performance, conformance and interoperability. The program is a result of legislation passed by the U.S. Congress to improve communication interoperability for first responders and is a partnership of the U.S Department of Homeland Security (“DHS”)’s Command, Control and Interoperability Division, the National Institute of Standards and Technology (“NIST”), radio equipment manufacturers and the emergency response community.

Both the KNG and BKR series radios have been validated under the CAP as being P25 compliant.

Description of Software-as-a-Service (SaaS) Offerings

BK’s first SaaS service, InteropONE, was introduced in October 2022 at the International Association of Chiefs of Police (IACP) conference. InteropONE is a Push-to-talk-Over-Cellular (PTTOC) SaaS service which provides emergency incident commanders the capability to dynamically establish group push-to-talk communications between at-large smartphone users directly from their smartphone. There are several PTTOC services available today from cellular carriers and other service providers. While these services provide supplementary features and coverage to LMR networks, PTTOC subscribers to a specific service cannot communicate to PTTOC subscribers of another service provider without deployment of pre-configured, complex, and expensive interoperability gateways. InteropONE addresses this interoperability gap by enabling emergency management personnel to quickly bring together any person with a smartphone regardless of which carrier they subscribed to or whether the smartphone user subscribes to a PTTOC service. This capability is vitally important for effectively managing unplanned incidents that may involve groups of people that don’t normally collaborate.

BKRplay is BK’s public safety smartphone application which provides access to the InteropONE service, as well as a host of other capabilities which make the first responder safer and more efficient. Built around an intelligent interface between a smartphone and our BK radio, BKRplay services deliver an enhanced customer experience which increases the sales reach of our radios. BKRplay is available to download from the Google Play or Apple App stores.

We presently have three pending U.S. patent applications for the SaaS services products.

Description of Markets

Government and Public Safety Market

The government and public safety market includes military, fire, rescue, law enforcement, homeland security and emergency medical responder personnel, both domestic and international. Government and public safety users currently use products that employ either P25 digital or analog technology. However, public safety users in federal, state and local government agencies and certain other countries are migrating to digital P25 products. The evolution of the standard and compliant digital products is explained in the preceding “Industry Overview” section.

In most instances, our KNG and BKR-branded products serve this market and are sold either directly to end-users or through two-way communications dealers.

The BKRplay smartphone application and InteropONE POC service have been designed to service this market and are sold directly to end-users or through SaaS resellers.

Sales to government and public safety users represented substantially all of our sales for 2023 and 2022.

Table of Contents

Engineering, Research and Development

Our engineering and product development activities are conducted by a team of 32 employees. Their primary development focus has been the design of a new line of next-generation P25 digital products, the BKR Series, which are in the process of supplanting our KNG products. The first product in this line, the VHF BKR5000 portable radio was introduced in August 2020. The second product, the all-band BKR9000 portable radio was released in April 2023. Our KNG and BKR products also provide P25 compliant encrypted operation for secured communication, GPS location and network authentication capabilities.

A segment of our engineering team is responsible for product specifications based on customer requirements and participates in quality assurance activities. They also have primary responsibility for applied and production engineering. For 2023 and 2022, our engineering and development expenses were approximately $9.3 million and $9.6 million, respectively.

Intellectual Property

We presently have four U.S. patents in force, and we have four pending U.S. patent applications. We have registered U.S. trademarks related to the names “BK Technologies,” “BK Radio” and “Radios for Heroes”, and have applied for registration of “BKR”, “BKRplay” and “InteropONE”. We rely on trade secret laws and employee and third-party nondisclosure agreements to protect our intellectual property rights.

Manufacturing and Raw Materials

Our manufacturing strategy is to utilize the highest quality and most cost-effective resources available for every aspect of our manufacturing. Consistent with that strategy, we have successfully utilized a hybrid of Florida-based internal manufacturing capability in concert with outside contract arrangements for different manufacturing processes. Our outside manufacturing contract arrangements have been managed, updated and expanded to meet our present requirements. This hybrid approach has been instrumental in ramping up our production capacity while controlling our product costs and managing our product quality.

Contract manufacturers produce various products and subassemblies on our behalf. Generally, the contract manufacturers procure raw materials from BK-approved sources and complete manufacturing activities in accordance with our specifications. Manufacturing agreements and purchase orders govern the business relationship with the contract manufacturers. These agreements and purchase orders have various terms and conditions and may be renewed or modified upon agreement by both parties. Their scope may also be expanded to include new products in the future.

We plan to expand our contract manufacturing relationships and suppliers where it furthers our business objectives. This strategy allows us to effectively manage quality, product costs and lead-times while focusing other resources on our core technological competencies of product design and development. We believe that, in certain circumstances, the use of experienced, high-quality, high-volume manufacturers can provide greater manufacturing specialization and expertise, higher levels of flexibility and responsiveness, and faster delivery of product, all of which contribute toward product cost control. To ensure that products manufactured by others meet our quality standards, our production and engineering teams work closely with our contract manufacturers in all key aspects of the production process. We establish product specifications, select the components and, in some cases, the suppliers. We retain all document control. We also work with our contract manufacturers to improve process control and product design and conduct periodic on-site inspections.

We rely upon a limited number of both American and foreign suppliers for several key products and components. Approximately 69% of our material, subassembly and product procurements in 2023 were sourced from twelve suppliers. We place purchase orders from time to time with these suppliers and have no guaranteed supply arrangements. In addition, certain components are obtained from single sources. During 2022, due to lingering COVID-related supply chain disruptions, our operations were materially impaired due to delays from single-source suppliers. We manage the risk of such delays by securing secondary sources, where possible, and redesigning products in response to component shortages or obsolescence. We strive to maintain strong relationships with all of our suppliers. We anticipate that current relationships, or others that are comparable, will be available to us in the future.

Table of Contents

Seasonal Impact

We may experience fluctuations in our quarterly results, in part, due to governmental customer spending patterns that are influenced by government fiscal year budgets and appropriations. We may also experience fluctuations in our quarterly results, derived, in part, from sales to federal and state agencies that participate in wildland fire-suppression efforts, which may be greater during the summer season when forest fire activity is heightened. In some years, these factors may cause an increase in sales for the second and third quarters, compared with the first and fourth quarters of the same fiscal year. Such increases in sales may cause quarterly variances in our cash flow from operations and overall financial results.

Significant Customers

Sales to the U.S. Government represented approximately 49% and 38% of our total sales for the years ended December 31, 2023 and 2022, respectively. These sales were primarily to various government agencies, including those within the DHS, the U.S. Department of Defense (“DOD”), the USFS and the U.S. Department of Interior (“DoI”).

Backlog

Our backlog of unshipped customer orders was approximately $16.0 million and $27.0 million as of December 31, 2023 and 2022, respectively. Changes in the backlog are attributed primarily to the timing of orders and their fulfillment, which can be impacted by factors related to our supply chain.

Competition

We compete with other domestic and foreign companies primarily in the North American market, but also internationally. One dominant competitor, Motorola Solutions, Inc., is estimated to have well in excess of half the market for LMR products. We compete by capitalizing on our advantages and strengths, which include price, product quality and customer responsiveness.

Governmental Regulation

We are subject to various international and U.S. federal, state and local laws affecting our business. Any finding that we have been or are in noncompliance with such laws could result in, among other things, governmental penalties. Further, changes in existing laws or new laws may adversely affect our business and could also have the effect of limiting capital expenditures by our customers, which could have a material adverse effect on our business, financial condition and results of operations.

In connection with our U.S. Government contracts, we are subject to the U.S. Federal Government procurement regulations that may provide the buyer with the right to audit and review our performance, as well as our compliance with applicable laws and regulations. In addition, our business is subject to government regulation based on the products we sell that may be subject to government requirements, such as obtaining an export license or end-user certificate from the buyer, in certain circumstances. If a government audit uncovers improper or illegal activities, or if we are alleged to have violated any laws or regulations governing the products we sell under our government contracts, we may be subject to civil and criminal penalties and administrative sanctions, including termination of contracts, forfeiture of profits, suspension of payments, fines and suspension or debarment from doing business with U.S. Federal Government agencies.

Our radio products are regulated by the FCC in the U.S. and similar agencies in other countries where we offer our products. Consequently, we and our customers could be positively or negatively affected by the rules and regulations adopted from time to time by the FCC or regulatory agencies in other countries. For example, our wireless communications products, including two-way LMRs, are subject to FCC regulations related to radio frequency spectrum. As a result of limited spectrum availability, the FCC has mandated that new LMR equipment utilize technology that is more spectrum-efficient, which effectively meant that the industry had to migrate to digital technology. These types of mandates may provide us with new business opportunities or may require us to modify all or some of our products so that they can continue to be manufactured and marketed, which may lead to an increase in our capital expenditures and research and development expenses.

Table of Contents

As a public company, we are also subject to regulations of the SEC and the stock exchange on which we are listed (NYSE American).

Some of our operations use substances regulated under various federal, state, local and international laws governing the environment and worker health and safety, including those governing the discharge of pollutants into the ground, air and water, the management and disposal of hazardous substances and wastes and the cleanup of contaminated sites, as well as relating to the protection of the environment. Certain of our products are subject to various federal, state, local and international laws governing chemical substances in electronic products. During 2023, compliance with these U.S. federal, state and local and international laws did not have a material effect on our capital expenditures, earnings or competitive position.

Human Capital Resources

As of December 31, 2023, we had 145 employees, most of whom are located at our West Melbourne, Florida facility; 79 of these employees are engaged in direct manufacturing or manufacturing support, 32 in engineering, 22 in sales and marketing, and 12 in headquarters, accounting and human resources activities. Our employees are not represented by any collective bargaining agreements, nor has there ever been a labor-related work stoppage. We strive to develop and maintain good relations with our employees and believe our relations with our employees are good.

The Company complies with all applicable state, local and international laws governing nondiscrimination in employment in every location in which the Company operates. All applicants and employees are treated with the same high level of respect regardless of their gender, ethnicity, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, disability or protected veteran status.

Our mission is to remain deeply rooted in the critical communications industry for all military, first responders, and public safety heroes. Our four guiding principles: growth, tenacious commitment to quality, continuous improvement, and a keen focus on being customer-centric, continuously drive our efforts to be the best partner for our customers, investment for our shareholders, neighbor in our community and to provide an empowering work environment for our employees.

The Company is committed to the health, safety and wellness of its employees. During the COVID-19 pandemic, we modified our business practices and implemented certain policies at our offices in accordance with best practices to accommodate, and at times mandate, social distancing and remote work practices, including restricting employee travel, modifying employee work locations, implementing social distancing and enhanced sanitary measures in our facilities, and cancelling attendance at events and conferences. In addition, we have invested in employee safety equipment, additional cleaning supplies and measures, re-designed production lines and workplaces as necessary and adapted new processes for interactions with our suppliers and customers to safely manage our operations.

Information Relating to Domestic and Export Sales

The following table summarizes our sales of LMR products by customer location:

	2023		2022
	(in millions)
United States	$	71.0	$	49.4
International		3.1		1.6
Total	$	74.1	$	51.0

Additional financial information is provided in the Consolidated Financial Statements included in this report.

Table of Contents

Item 1A. Risk Factors.

Various portions of this report contain forward-looking statements that involve risks and uncertainties. Actual results, performance or achievements could differ materially from those anticipated in these forward-looking statements as a result of certain risk factors, including those set forth below and elsewhere in this report. We undertake no obligation to revise or update any forward-looking statements contained herein to reflect subsequent events or circumstances or the occurrence of unanticipated events. We face many risks and uncertainties, any one or more of which could have a material adverse effect on our business, results of operations, financial condition (including capital and liquidity), or prospects or the value of or return on an investment in BK. We describe certain of these risks and uncertainties in this section, although we may be adversely affected by other risks or uncertainties that are not presently known to us, that we have failed to appreciate, or that we currently consider immaterial. These risk factors should be read in conjunction with the MD&A in Part II, Item 7 of this Annual Report on Form 10-K, and the Consolidated Financial Statements and notes thereto. This Annual Report on Form 10-K is qualified in its entirety by these risk factors.

We depend on the success of our LMR product line.

We currently depend on our LMR products as our sole source of sales. A decline in the price of and/or demand for LMR products, as a result of competition, technological change, the introduction of new products by us or others or a failure to manage product transitions successfully, could have a material adverse effect on our business, financial condition and results of operations. In addition, our future success will largely depend on the successful introduction and sale of additional products to our BKR Series product line, including additional multiband products, which we may be unable to successfully complete in a timely manner. Even if we successfully develop and launch additional products to the BKR Series product line, or any other new products, the development of which is a complex and requires innovation and investment, such products may not achieve market acceptance, which could have a material adverse effect on us.

We are engaged in a highly competitive industry.

We face intense competition from other LMR suppliers, and the failure to compete effectively could materially and adversely affect our market share, financial condition and results of operations. The largest supplier of LMR products in the world, Motorola Solutions, Inc., currently is estimated to have well in excess of half the market for LMR products. This supplier is also the world’s largest supplier of P-25 products. Some of our competitors are significantly larger and have longer operating histories, greater name recognition, larger customer bases and significantly greater financial, technical and marketing resources than we have. Some also have established reputations for success in developing and supplying LMR products, including providing complete, integrated, communications systems and infrastructure. We do not provide complete, integrated, communications systems and infrastructure. These advantages may allow our competitors:

	·	to be more attractive to customers who desire a single-source supplier of LMR products;

	·	to respond more quickly to new or emerging technologies and changes in customer requirements, which may render our products obsolete or less marketable;

	·	to engage in more extensive research and development;

	·	to undertake more far-reaching marketing campaigns;

	·	to be able to take advantage of acquisitions and other opportunities;

	·	to adopt more aggressive pricing policies; and

	·	to be more attractive to potential employees and strategic partners.

Some of our competitors have established broad networks of sales locations and multiple distribution channels that are more extensive than ours. We may not be able to compete successfully, and competitive pressures may materially and adversely affect our business, results of operations and financial condition.

Table of Contents

An increase in the demand for P-25 products could benefit competitors that are better financed and positioned to meet such demand. P-25 products have been brought to the market by an increasing number of our competitors. Our first P-25 portable radio was brought to market in 2003, and in recent years we introduced a new line of P-25 products, the BKR Series. Bringing such products to market and achieving a significant market penetration for them will continue to require time and expenditure of funds, and we may be unable to successfully do so. We may be unsuccessful in developing and marketing, on a timely basis, fully functional product enhancements or new products that respond to these and other technological advances, and our new products may not be accepted by customers. An inability to successfully develop and/or market products could have a material adverse effect on our business, financial condition and results of operations.

Our industry is characterized by rapidly changing technology and our success is dependent on our ability to adapt to such changes.

Our business could suffer if we are unable to keep pace with rapid technological changes and product development in our industry. The market for our LMR products is characterized by ongoing technological development, evolving industry standards and frequent product introductions. The LMR industry has largely transitioned from analog LMR products to digital LMR products in recent years. In addition, the APCO P-25 standard has been widely adopted. If we are unable to successfully keep up with these changes, our business, financial condition and results of operations could be materially adversely affected.

We depend heavily on sales to the U.S. Government.

We are subject to risks associated with our reliance on sales to the U.S. Government. For the year ended December 31, 2023, approximately 49% of our sales were to agencies and departments of the U.S. Government, including but not limited to, agencies of the DHS, DoA, DoD and DoI. We may be unable to maintain this government business. Our ability to maintain our government business will depend on many factors outside of our control, including competitive factors, changes in government personnel making contract decisions, spending limits and political factors. The loss of sales to the U.S. Government would have a material adverse effect on our business, financial condition and results of operations.

In addition, most U.S. Government customers award business through a competitive bidding process, which results in greater competition and increased pricing pressure. The bidding process involves significant cost and managerial time to prepare bids for contracts that may not be awarded to us. Even if we are awarded contracts, we may fail to accurately estimate the resources and costs required to fulfill a contract, which could negatively impact the profitability of any contract awarded to us. In addition, following a contract award, we may experience significant expense or delay, contract modification or contract rescission as a result of customer delay or our competitors protesting or challenging contracts awarded to us in competitive bidding.

Any delay, especially any prolonged delay, in the U.S. Government budget process or a government shutdown may result in us incurring substantial labor or other costs without reimbursement under our customer contracts, decrease the number of purchase orders issued under our contracts with government agencies, or result in the suspension of work on contracts in progress or in payment delays.

Any of these events could have a material adverse effect on our business, financial condition and results of operations.

Our business is dependent on U.S. Government contracts, which are highly regulated and subject to terminations and oversight audits by U.S. Government representatives that could result in adverse findings and negatively impact our business.

Our U.S. Government business is subject to specific procurement regulations with numerous compliance requirements. These requirements, although customary in U.S. Government contracting, increase our performance and compliance costs. These costs may increase in the future, thereby reducing our margins, which could have an adverse effect on our financial condition. Failure to comply with these regulations could lead to suspension or debarment from U.S. Government contracting or subcontracting for a period of time. Among the causes for debarment are violations of various laws or policies, including those related to procurement integrity, U.S. Government security regulations, employment practices, protection of criminal justice data, protection of the environment, accuracy of records, proper recording of costs, foreign corruption and the False Claims Act.

Generally, U.S. Government contracts are subject to oversight audits by U.S. Government representatives and could result in adjustments to our contracts. Any costs found to be improperly allocated to a specific contract or grant may not be allowed, and such costs already reimbursed to us may have to be refunded. Future audits and adjustments, if required, may materially reduce our revenues or profits upon completion and final negotiation of audits. Negative audit findings could also result in investigations, termination of a contract, forfeiture of profits or reimbursements, suspension of payments, fines and suspension or prohibition from doing business with the U.S. Government. All contracts with the U.S. Government are subject to cancellation at the convenience of the U.S. Government.

Table of Contents

In addition, contacts with government officials and participation in political activities are areas that are tightly controlled by federal, state, local and international laws. Failure to comply with these laws could cost us opportunities to seek certain government sales opportunities or even result in fines, prosecution or debarment.

Changes in U.S. trade policy, including changes to existing trade agreements and any resulting changes in international trade relations, may have a material adverse effect on us.

The U.S. may continue to alter its approach to international trade, which may impact existing bilateral or multi-lateral trade agreements and treaties with foreign countries. The U.S. has imposed tariffs on certain foreign goods and may increase tariffs or impose new ones, and certain foreign governments have retaliated and may continue to do so. We derive a majority of our revenues from international sales, which makes us especially vulnerable to increased tariffs. Changes in U.S. trade policy have created ongoing turmoil in international trade relations, and it is unclear what future actions governments will or will not take with respect to tariffs or other international trade agreements and policies. Ongoing or new trade wars or other governmental action related to tariffs or international trade agreements or policies could reduce demand for our products and services, increase our costs, reduce our profitability, adversely impact our supply chain or otherwise have a material adverse effect on our business and results of operations.

Our business is subject to the economic, political, and other risks of manufacturing products in foreign countries.

We engage in business with manufacturers, some of which are located in other countries. Approximately 16% of our material, subassembly and product procurements in 2023 were sourced internationally. Accordingly, we are subject to special considerations and risks not typically associated with companies operating solely in the U.S. These include the risks associated with the political, economic, legal, health and other conditions in such foreign countries, among others. Our business, financial condition and operating results may be materially and adversely affected by, among other things, changes in the general political, social, health and economic conditions in foreign countries in which we maintain sourcing relationships, unfavorable changes in U.S. trade legislation and regulations, the imposition of governmental economic sanctions on countries in which we do business or other trade barriers, threats of war, terrorism or governmental instability, labor disruptions, the impact of public health epidemics on employees and the global economy, which may cause our manufacturers or suppliers to temporarily suspend operations in the affected region, potentially negatively impacting our product launch timing and shipments, currency controls, fluctuating exchange rates with respect to contracts not denominated in U.S. dollars, and unanticipated or unfavorable changes in government policies with respect to laws and regulations, anti-inflation measures and method of taxation. If we were unable to navigate foreign regulatory environments, or if we were unable to enforce our contract rights in foreign countries, our business could be adversely impacted. Any of these events could interrupt our manufacturing process and cause operational disruptions, increase prices for manufacturing, reduce our sales or otherwise have an adverse effect on our operating performance.

We are currently operating in a period of economic uncertainty and capital markets disruption, which has been significantly impacted by geopolitical instability due to the ongoing military conflict between Russia and Ukraine and the Israeli–Palestinian conflict in the Middle-East. Our business, financial condition and results of operations may be materially adversely affected by any negative impact on the global economy and capital markets resulting from conflicts in Ukraine, the Middle-East or any other geopolitical tensions.

U.S. and global markets are experiencing volatility and disruption following the escalation of geopolitical tensions and the military conflict between Russia and Ukraine and Israel and Palestinian state. Although the length and impact of the ongoing military conflicts is highly unpredictable, the conflict in both of these regions could lead to market disruptions, including significant volatility in commodity prices, credit and capital markets, as well as supply chain interruptions. We are continuing to monitor the situations in Ukraine, Israel and globally to assess its potential impact, if any, on our business.

Additionally, Russia’s prior annexation of Crimea, recent recognition of two separatist republics in the Donetsk and Luhansk regions of Ukraine and subsequent military interventions in Ukraine have led to sanctions and other penalties being levied by the United States, European Union and other countries against Russia, Belarus, the Crimea Region of Ukraine, the so-called Donetsk People’s Republic, and the so-called Luhansk People’s Republic, including agreement to remove certain Russian financial institutions from the Society for Worldwide Interbank Financial Telecommunication (“SWIFT”) payment system. Additional potential sanctions and penalties have also been proposed and/or threatened. Russian military actions and the resulting sanctions could adversely affect the global economy and financial markets and lead to instability and lack of liquidity in capital markets, potentially making it more difficult for us to obtain additional funds.

Table of Contents

Any of the above-mentioned factors could affect our business, prospects, financial condition, and operating results. The extent and duration of the military action, sanctions and resulting market disruptions are impossible to predict, but could be substantial. Any such disruptions may also magnify the impact of other risks described in this Annual Report on Form 10-K.

Cyber-attacks and other security threats and disruptions could have a material adverse effect on our business.

As a supplier of LMR products to federal, state and municipality agencies, we face a multitude of security threats, including cybersecurity threats ranging from attacks common to most industries, such as ransomware and denial-of-service, to attacks from more advanced and persistent, highly organized adversaries, including nation state actors, which target the defense contractors and other critical infrastructure sectors. The sophistication of the threats continue to evolve and grow, including the risk associated with the use of emerging technologies, such as artificial intelligence and quantum computing, for nefarious purposes. In addition to cybersecurity threats, we face threats to the security of our facilities and employees from sabotage or other disruptions, any of which could adversely affect our business. The improper conduct of our employees or others working on behalf of us who have access to sensitive information could also adversely affect our business and reputation. Our customers, suppliers, subcontractors and manufacturing partners experience similar security threats.

If we are unable to protect sensitive information, including complying with evolving information security, data protection and privacy regulations, our customers or governmental authorities could investigate the adequacy of our threat mitigation and detection processes and procedures; and could bring actions against us for noncompliance with applicable laws and regulations. Moreover, depending on the severity of an incident, our customers’ data, our employees’ data, our intellectual property (including trade secrets and research, development and engineering know-how), and other third-party data (such as subcontractors, suppliers and vendors) could be compromised, which could adversely affect our business. LMR products we provide to customers also carry cybersecurity risks, including risks that they could be breached or fail to detect, prevent or combat attacks, which could result in losses to our customers and claims against us, and could harm our relationships with our customers and financial results.

Given the persistence, sophistication, volume and novelty of threats we face, we may not be successful in preventing or mitigating an attack that could have a material adverse effect on us and the costs related to cyber or other security threats or disruptions may not be fully insured or indemnified by other means. The public safety aspects of our business and much of the data we protect increase and create different risks relative to other industries.

Changes in U.S. federal, state and local and foreign tax law could adversely affect our business and financial condition.

The laws, rules, and regulations dealing with U.S. federal, state and local and foreign income taxation are constantly under review by persons involved in the legislative process and by the Internal Revenue Service and the U.S. Treasury Department. Changes to tax laws (which changes may have immediate and/or retroactive application) could adversely affect us or the holders of our common stock. In recent years, many changes have been made to applicable tax laws and changes are likely to continue to occur in the future. It cannot be predicted whether, when, in what form, or with what effective dates, new tax laws may be enacted, or regulations and rulings may be enacted, promulgated or issued under existing or new tax laws, which could result in an increase in our tax liability or require changes in the manner in which we operate in order to minimize or mitigate any adverse effects of changes in tax law or in the interpretation thereof.

Table of Contents

Any outbreak or worsening of an outbreak of contagious diseases, or other adverse public health developments, could have a material and adverse effect on our business operations, financial condition and results of operations. For example, in December 2019, a novel strain of the coronavirus (COVID-19) surfaced, which spread globally and was declared a pandemic by the World Health Organization in March 2020. In response to COVID-19, national and local governments around the world instituted certain measures, including travel bans, prohibitions on group events and gatherings, shutdowns of certain businesses, curfews, shelter-in-place orders, and recommendations to practice social distancing. We are considered an “essential business” that is supporting first responders and our manufacturing operations have remained open throughout the pandemic. We implemented certain policies at our offices in accordance with best practices to accommodate, and at times mandate, social distancing, wearing face masks, and remote work practices. Among other things, we have invested in employee safety equipment, additional cleaning supplies and measures, adjusted production lines and workplaces as necessary and adapted new processes for interactions with our suppliers and customers to safely manage our operations. Any employees that test positive for COVID-19 are quarantined and, if possible, work remotely in accordance with accepted safety practices until after passing subsequent testing.

In planning for the possible disruption of our business, we took steps to reduce expenses and control costs throughout the Company in 2022. During 2022, worldwide shortages of materials, particularly semiconductors and integrated circuits, resulted in limited supplies, extended lead times, and increased our costs and inventory levels for certain components used in our products. While, generally, we were able to procure the material necessary to manufacture our products and fulfill customer orders, there were delays and longer delivery times within our supply chain that reached a peak in 2022. The impact on our operations of such shortages significantly impacted our manufacturing operations and financial results. Continued progression of these circumstances could result in a decline in customer orders, as our customers could shift purchases to lower-priced or other perceived value offerings or reduce their purchases and inventories due to decreased budgets, reduced access to credit or various other factors, and impair our ability to manufacture our products, which could have a material adverse impact on our results of operations and cash flow. While the impacts of COVID-19 are reflected in our results of operations for 2023 and 2022 respectively, we cannot separate the direct COVID-19 impacts from other factors that cause our performance to vary from quarter to quarter. The ultimate duration and impact of the COVID-19 pandemic on our supply chain and geopolitical factors to our business, results of operations, financial condition and cash flows is dependent on future developments, including the duration and severity of the geopolitical factors on the global economy, which are uncertain and cannot be predicted at this time. Furthermore, the extent to which our mitigation efforts for these uncertainties are successful, if at all, is not presently ascertainable, but could have an adverse impact on the Company’s business, financial condition and results of operations.

We carry substantial quantities of inventory, and inaccurate estimates of necessary inventory could materially harm our business, financial condition and operating results.

We carry a significant amount of inventory to service customer requirements in a timely manner. If we are unable to sell this inventory over a commercially reasonable time, in the future we may be required to take inventory markdowns, which would reduce our net sales and/or gross margins. In addition, it is critical to our success that we accurately predict trends in customer demand, including seasonal fluctuations, in the future and do not overstock unpopular products or fail to sufficiently stock popular products. Both scenarios could materially harm our business, financial condition and operating results.

We enter into fixed-price contracts that could subject us to losses in the event we fail to properly estimate our costs or hedge our risks associated with currency fluctuations.

We sometimes enter into firm fixed-price contracts. If our initial cost estimates are incorrect, we can lose money on these contracts. Because certain of these contracts involve new technologies and applications, require us to engage subcontractors and/or can last multiple years, unforeseen events, such as technological difficulties, fluctuations in the price of raw materials, problems with our subcontractors or suppliers and other cost overruns, can result in the contract pricing becoming less favorable or even unprofitable to us and have an adverse impact on our financial results. In addition, a significant increase in inflation rates or currency fluctuations could have an adverse impact on the profitability of longer-term contracts.

Table of Contents

Our investment strategy may not be successful, which could adversely impact our financial condition.

We may invest part of our cash balances in public companies. For example, as of December 31, 2023, we held an investment in the Series B common interests of FG Financial Holdings, LLC (“FG Holdings LLC”). These types of investments carry more risk than holding our cash balances as bank deposits or, for example, such conservative investments as treasury bonds or money market funds. There can be no assurance that we will be able to maintain or enhance the value or the performance of the companies in which we have invested or in which we may invest in the future, or that we will be able to achieve returns or benefits from these investments. We may lose all or part of our investment relating to such companies if their value decreases as a result of their financial performance or for any other reason. If our interests differ from those of other investors in companies over which we do not have control, we may be unable to affect any change at those companies. We are not required to meet any diversification standards, and our investments may become concentrated. If our investment strategy is not successful or we achieve less than expected returns from these investments, it could have a material adverse effect on us. The Board of Directors may also change our investment strategy at any time, and such changes could further increase our exposure, which could adversely impact us.

Fundamental Global GP, LLC (“FG”), with its affiliates, is our largest stockholder, and its interests may differ from the interests of our other stockholders.

The interests of FG may differ from the interests of our other stockholders. As of December 31, 2023, FG and its affiliates, owners and managers together hold approximately 15% of the Company’s outstanding shares of common stock. Kyle Cerminara, Chief Executive Officer, Co-Founder, and Partner of FG, was Chairman of our Board of Directors until December 14, 2023. As a result of its ownership position FG could exert influence over matters submitted for stockholder approval, including the election of our directors and other corporate actions such as significant stock issuances, reorganizations, mergers and asset sales, and over our business, operations and management, including our strategic plans for the business. FG may have interests that differ from those of our other stockholders and may vote in a way with which our other stockholders disagree and which may be averse to their interests. FG’s ownership position may also have the effect of delaying, preventing or deterring a change of control of the Company, could deprive our stockholders of an opportunity to receive a premium for their common stock as part of a sale of the Company and might ultimately affect the market price of our common stock.

If we are unable to maintain our brand and reputation, our business, results of operations and prospects could be materially harmed.

Our business, results of operations and prospects depend, in part, on maintaining and strengthening our brand and reputation for providing high-quality products and services. Reputational value is based in large part on perceptions. Although reputations may take decades to build, any negative incidents can quickly erode trust and confidence, particularly if they result in adverse publicity, governmental investigations or litigation. If problems with our products cause operational disruption or other difficulties, or there are delays or other issues with the delivery of our products or services, our brand and reputation could be diminished. Damage to our reputation could also arise from actual or perceived legal violations or product safety issues, cybersecurity breaches, actual or perceived poor employee relations, actual or perceived poor service, actual or perceived poor privacy practices, operational or sustainability issues, actual or perceived ethical issues or other events within or outside of our control that generate negative publicity with respect to us. Any event that has the potential to negatively impact on our reputation could lead to lost sales, loss of new opportunities and retention and recruiting difficulties. If we fail to promote and maintain our brand and reputation successfully, our business, results of operations and prospects could be materially harmed.

We face a number of risks related to challenging economic conditions.

Current economic conditions in the U.S. and elsewhere remain uncertain. These challenging economic conditions could materially and adversely impact our business, liquidity and financial condition in a number of ways, including:

Inflation could adversely affect our profitability: We sometimes enter into firm fixed-price contracts. In an inflationary environment, our cost of capital, labor and materials can increase and the purchasing power of our cash resources can decline, which can have an adverse impact on our business or financial results. We are taking steps that we expect will enable us to maintain acceptable operating margins despite the inability to raise prices. However, it is possible that those steps will not be successful, and that the combination of inflation and reduced demand for our LMR products will adversely affect our profitability.

Table of Contents

	·	Potential deferment or reduction of purchases by customers: Significant deficits and limited appropriations confronting our federal, state and local government customers may cause them to defer or reduce purchases of our products. Furthermore, uncertainty about current and future economic conditions may cause customers to defer purchases of our products in response to tighter credit and decreased cash availability. Additionally, any delay, especially any prolonged delay, in the U.S. Government budget process or government shutdown may negatively impact the ability of many of our customers to purchase our products and decrease the number of purchase orders issued under our contracts with government agencies.

	·	Negative impact from increased financial pressures on third-party dealers, distributors and suppliers: We make sales to certain of our customers through third-party dealers and distributors. We generally do not require collateral from our customers. If credit pressures or other financial difficulties result in insolvencies of these third parties and we are unable to successfully transition the end customers to purchase our products from other third parties, or directly from us, it could materially and adversely impact our business, financial condition and operating results. Challenging economic conditions may also impact the financial condition of one or more of our key suppliers, which could negatively affect our ability to secure product to meet our customers’ demands.

	·	Limited access by us to credit and capital: The credit markets may limit our access to credit and impair our ability to raise capital, if needed, on acceptable terms or at all. From time to time, we also have cash in financial institutions in excess of federally insured limits, which funds might be at risk of loss should such financial institutions face financial difficulties.

The terms of the credit agreement with Alterna Capital Solutions, LLC contain restrictive covenants that may limit our operating flexibility or that of our subsidiaries.

On November 22, 2022, our subsidiaries, BK Technologies, Inc. and RELM Communications, Inc. (the “Subsidiaries”), entered into an Invoice Purchase and Security Agreement (“IPSA”) with Alterna Capital Solutions, LLC (“Alterna”) for a one-year line of credit with total maximum funding up to $15 million, with an interest rate of Prime plus 1.85%, and other monthly administrative fees. In November 2023, the IPSA was extended for one year. The IPSA line of credit is an accounts receivable and inventory financing facility, with the borrowing base of up to 85% of eligible accounts receivable and up to 75% of net orderly liquidation value of inventory, not to exceed 100% of eligible accounts receivable. The Company used funds obtained from the IPSA line of credit to replace the existing JPMC Credit Agreement (the “JPMC Credit Agreement”) and for working capital for the business. The IPSA also has covenants concerning additional financing and indebtedness restrictions. The IPSA provides for the payment of fees by the Subsidiaries and includes customary representations and warranties, indemnification provisions, covenants and events of default. Subject in some cases to cure periods, amounts outstanding under the IPSA may be accelerated for typical defaults including, but not limited to, the failure to make payments when due, the failure to perform any covenant, the inaccuracy of representations and warranties, the occurrence of debtor-relief proceedings, and the occurrence of unpermitted liens against the purchased accounts receivable and collateral. The Subsidiaries have granted Alterna a security interest in all of their respective personal property to secure their obligations under the IPSA. The Subsidiaries entered into a cross-guarantee, guaranteeing each other’s obligations under the IPSA, and BK also provided a guaranty of the Subsidiaries’ obligations under the IPSA. In general, the IPSA could have an adverse effect on our financial condition or results of operations.

We depend on a limited number of manufacturers and on a limited number of suppliers of components to produce our products, and the inability to obtain adequate and timely delivery of supplies and manufactured products could have a material adverse effect on us.

We contract with manufacturers to produce portions of our products. Our use of contract manufacturers exposes us to certain risks, including shortages of manufacturing capacity, reduced control over delivery schedules, quality assurance, production yield and costs. If any of our manufacturers terminate production or cannot meet our production requirements, we may have to rely on other contract manufacturing sources or identify and qualify new contract manufacturers. The lead-time required to qualify a new manufacturer could range from approximately two to six months. Despite efforts to do so, we may not be able to identify or qualify new contract manufacturers in a timely and cost-effective manner, and these new manufacturers may not allocate sufficient capacity to us in order to meet our requirements. Any significant delay in our ability to obtain adequate quantities of our products from our current or alternative contract manufacturers could have a material adverse effect on our business, financial condition and results of operations.

Table of Contents

In addition, our dependence on limited and sole source suppliers of components involves several risks, including a potential inability to obtain an adequate supply of components, price increases, late deliveries and poor component quality. Approximately 95% of our material, subassembly, and product procurements in 2023 were sourced from twelve suppliers. We place purchase orders from time to time with these suppliers and have no guaranteed supply arrangements. Disruption or termination of the supply of these components could delay shipments of our products. The lead-time required for some of our proprietary components is up to as long as twelve to eighteen months. If we are unable to accurately predict our component needs, or if our component supply is disrupted, we may miss market opportunities by not being able to meet the demand for our products. This may damage our relationships with current and prospective customers and have a material adverse effect on our business, financial condition and results of operations.

We may not be able to manage our growth.

Acquisitions and other business transactions may disrupt or otherwise have a negative impact on our business, financial condition and results of operations. We do not have any acquisitions currently pending, and there can be no assurance that we will complete any future acquisitions or other business transactions or that any such transactions which are completed will prove favorable to our business. We intend to seek stockholder approval for any such transactions only when so required by applicable law or regulation. Any acquisitions of businesses and their respective assets also involve the risks that the businesses and assets acquired may prove to be less valuable than we expect and we may assume unknown or unexpected liabilities, costs and problems. We hope to grow rapidly, and the failure to manage our growth could materially and adversely affect our business, financial condition and results of operations. Our business plan contemplates, among other things, leveraging our products and technology for growth in our customer base and sales. This growth, if it materializes, could significantly challenge our management, employees, operations and financial capabilities. In the event of this expansion, we have to continue to implement and improve our operating systems and to expand, train, and manage our employee base. If we are unable to manage and integrate our expanding operations effectively, our business, results of operations and financial condition could be materially and adversely affected.

If our products contain defects or otherwise fail to perform as expected, we could be liable for damages and incur unanticipated warranty, recall and other related expenses, our reputation could be damaged, we could lose market share and, as a result, our financial condition or results of operations could suffer.

Our products rely on complex electronic circuits, capacitors, sensors, user-friendly interfaces and tightly integrated electromechanical designs to accomplish their missions. Our products may contain defects or experience failures due to any number of issues in design, materials, manufacture, deployment and/or use. If any of our products contain a defect, compatibility or interoperability issue or other error, we may have to devote significant time and resources to find and correct the issue. Such efforts could divert the attention of our management team and other relevant personnel from other important tasks. A product recall or a significant number of product returns could (i) be expensive; (ii) damage our reputation and relationships with utilities and other third-party vendors; (iii) result in the loss of business to competitors; and (iv) result in litigation against us. Costs associated with field replacement labor, hardware replacement, re-integration with third-party products, handling charges, correcting defects, errors and bugs, or other issues could be significant and could materially harm our financial results.

Environmental, social and governance matters may impact our business and reputation.

Increasingly, in addition to the importance of their financial performance, companies are being judged by their performance on a variety of environmental, social and governance (“ESG”) matters, which are considered to contribute to the long-term sustainability of companies’ performance.

A variety of organizations measure the performance of companies on ESG topics, and the results of these assessments are widely publicized. In addition, investment in funds that specialize in companies that perform well in such assessments are increasingly popular, and major institutional investors have publicly emphasized the importance of ESG measures to their investment decisions. Topics taken into account in such assessments include, among others, companies’ efforts and impacts on climate change and human rights, ethics and compliance with law, diversity and the role of companies’ board of directors in supervising various sustainability issues.

ESG goals and values are embedded in our core mission and vision, and we consider their potential impact on the sustainability of our business over time and the potential impact of our business on society. However, in light of investors’ increased focus on ESG matters, there can be no certainty that we will manage such issues successfully, or that we will successfully meet society’s expectations as to our proper role. This could lead to the risk of litigation or reputational damage relating to our ESG policies or performance.

Table of Contents

Further, possible actions to address ESG issues may not maximize short-term financial results and may yield financial results that conflict with the market’s expectations. We have and may in the future make business decisions that may reduce our short-term financial results if we believe that the decisions are consistent with our ESG goals, which we believe will improve our financial results over the long term. These decisions may not be consistent with the short-term expectations of our stockholders and may not produce the long-term benefits that we expect, in which case our business, financial condition, and operating results could be harmed.

Retention of our executive officers and key personnel is critical to our business.

Our key executives are critical to our success. The loss of services from any of our executive officers or other key employees due to any reason whatsoever could have a material adverse effect on our business, financial condition and results of operations.

Our success is also dependent upon our ability to hire and retain qualified operations, development and other personnel. Competition for qualified personnel in our industry is intense, and we may be unable to hire or retain the necessary personnel. The inability to attract and retain qualified personnel could have a material adverse effect on our business, financial condition and results of operations.

We have had changes in our senior management team and other personnel over the past few years and have promoted or hired new employees to fill certain roles. Our inability to effectively integrate the newly hired or promoted senior managers or other employees into our business process, controls and systems could have a material adverse effect on us.

We rely on a combination of contract, trademark and trade secret laws to protect our intellectual property rights, and failure to effectively utilize or successfully assert these rights could negatively impact us.

Currently, we have four approved and four pending applications for US patents. We have several trademarks related to the names “BK Technologies,” “BK Radio” and “Radios for Heroes”. We have applied for trademarks related to the names “BKR”, “BKRplay” and “InteropONE”. As part of our confidentiality procedures, we generally enter into nondisclosure agreements with our employees, distributors and customers and limit access to and distribution of our proprietary information. We also rely on trade secret laws to protect our intellectual property rights. There is a risk that we may be unable to prevent another party from manufacturing and selling competing products or otherwise violating our intellectual property rights. Our intellectual property rights, and any additional rights we may obtain in the future, may be invalidated, circumvented or challenged in the future. It may also be particularly difficult to protect our products and intellectual property under the laws of certain countries in which our products are or may be manufactured or sold. Our failure to perfect or successfully assert intellectual property rights could harm our competitive position and could negatively impact us.

Rising health care costs may have a material adverse effect on us.

The costs of employee health care insurance have been increasing in recent years due to rising health care costs, legislative changes and general economic conditions. We cannot predict what other health care programs and regulations ultimately will be implemented at the federal or state level or the effect of any future legislation or regulation in the U.S. on our business, financial condition and results of operations. In addition, we cannot predict when or if Congress will repeal and/or replace certain health care programs and regulations at the federal level and the impact such changes would have on our business. A continued increase in health care costs could have a material adverse effect on us.

The insurance that we maintain may not fully cover all potential exposures.

We maintain property, business interruption and casualty insurance, but such insurance may not cover all risks associated with the hazards of our business and is subject to limitations, including deductibles and maximum liabilities covered. We are potentially at risk if one or more of our insurance carriers fail. Additionally, severe disruptions in the domestic and global financial markets could adversely impact the ratings and survival of some insurers. In the future, we may not be able to obtain coverage at current levels, and our premiums may increase significantly on coverage that we maintain.

Table of Contents

Our stock price is vulnerable to significant fluctuations, including due to our fluctuating quarterly operating results.

Our quarterly operating results may fluctuate significantly from quarter to quarter and may be below the expectations of the investment community, resulting in volatility for the market price for our common stock. Other factors affecting the volatility of our stock price include:

	·	future announcements concerning us or our competitors;

	·	the announcement or introduction of technological innovations or new products by us or our competitors, including announcements regarding the status of our BKR Series product line;

	·	changes in product pricing policies by us or our competitors;

	·	changes in earnings estimates by us or our competitors or by securities analysts;

	·	additions or departures of our key personnel; and

	·	sales of our common stock.

In addition, the stock market is subject to price and volume fluctuations affecting the market price for the stock of many companies generally, which often are unrelated to operating performance.

During the period from January 1, 2020 to December 31, 2023, the trading price of our common stock ranged from $8.30 to $23.05. Many factors may cause our stock price to fluctuate, including those discussed above, variations in quarterly results; the hiring or departure of key personnel; acquisitions or strategic alliances involving us or our competitors; market conditions in our industry; and the global macroeconomic and geopolitical environment. Broad market fluctuations may adversely affect our stock price. When the market price of a company’s stock drops significantly, stockholders often institute securities litigation against that company. Any such litigation could cause us to incur significant expenses defending against the claim, divert the time and attention of our management and result in significant damages.

Natural disasters, acts of war or terrorism and other catastrophic events beyond our control could have a material adverse effect on our operations and financial condition.

The occurrence of one or more natural disasters, such as fires, hurricanes, tornados, tsunamis, floods and earthquakes; geo-political events, such as civil unrest in a country in which our suppliers or manufacturers are located, or acts of war or terrorism (wherever located around the world) or military activities disrupting transportation, communication or utility systems or otherwise causing damage to our business, employees, suppliers, manufacturers and customers; or other highly disruptive events, such as nuclear accidents, pandemics, unusual weather conditions or cyber-attacks, could have a material adverse effect on our business, financial condition and results of operations. Such events could result, among other things, in operational disruptions, physical damage to or destruction or disruption of one or more of our properties or properties used by third parties in connection with the supply of products or services to us, the lack of an adequate workforce in parts or all of our operations and communications and transportation disruptions. These factors could also cause consumer confidence and spending to decrease or result in increased volatility in the U.S. and global financial markets and economy. Such occurrences could have a material adverse effect on us and could also have indirect consequences, such as increases in the costs of insurance, if they result in significant loss of property or other insurable damage.

A security breach or other significant disruption of our information technology systems, or those of our distributors, manufacturers, suppliers and other partners, caused by cyber-attack or other means, could have a negative impact on our operations, sales and results of operations.

From time to time, we may experience cyber-attacks on our information technology systems and the information systems of our distributors, manufacturers, suppliers and other partners, whose systems we do not control. These systems are vulnerable to damage, unauthorized access or interruption from a variety of sources, including, but not limited to, continually evolving cyber-attacks (including social engineering and phishing attempts), attempts to gain unauthorized access to data, cyber intrusion, computer viruses, security breach, misconduct by employees or other insiders with access to our data, energy blackouts, natural disasters, terrorism, sabotage, war and telecommunication failures. Cyber-attacks are rapidly evolving and becoming increasingly sophisticated. Computer hackers and others might compromise our security measures, or security measures of those parties that we do business with now or in the future, and obtain the personal information of our customers, employees and partners or our business information. A cyber-attack or other significant disruption involving our information technology systems or those of our distributors, manufacturers, suppliers or other partners, could result in disruptions in critical systems, corruption or loss of data, theft of data, funds or intellectual property, and unauthorized release of our or our customers’ proprietary, confidential or sensitive information. Such unauthorized access to, or release of, this information could expose us to data loss, disrupt our operations, allow others to unfairly compete with us, subject us to litigation, government enforcement actions, regulatory penalties and costly response measures, and could seriously disrupt our operations. Any resulting negative publicity could also significantly harm our reputation. We may not have adequate insurance coverage to compensate us for any losses associated with such events. Any or all of the foregoing could have a negative impact on our business, financial condition, results of operations and cash flows.

Table of Contents

Because the techniques used to obtain unauthorized access to, or disable, degrade or sabotage, information technology systems change frequently and often are not recognized until launched against a target, we may be unable to anticipate these techniques, implement adequate preventative measures or remediate any intrusion on a timely or effective basis. Moreover, the development and maintenance of these preventative and detective measures is costly and requires ongoing monitoring and updating as technologies change and efforts to overcome security measures become more sophisticated. We, therefore, remain potentially vulnerable to additional known or yet unknown threats, as in some instances, we, our distributors, manufacturers, suppliers and other partners, may be unaware of an incident or its magnitude and effects. We also face the risk of exposing our customers or partners to cybersecurity attacks. In addition, from time to time, we implement updates to our information technology systems and software, which can disrupt or shut down our information technology systems. We may not be able to successfully integrate and launch these new systems as planned without disruption to our operations.

The risk of noncompliance with U.S. and foreign laws and regulations applicable to us could materially adversely affect us.

Failure to comply with government regulations applicable to our business could result in penalties and reputational damage. Our products are regulated by the FCC and otherwise subject to a wide range of global laws. As a public company, we are also subject to the regulations of the SEC and the stock exchange on which we are listed. These laws and regulations are complex, change frequently, have tended to become more stringent over time and increase our cost of doing business. Compliance with existing or future laws, including U.S. tax laws, could subject us to future costs or liabilities, impact our production capabilities, constrict our ability to sell, expand or acquire facilities, restrict what products and services we can offer, and generally impact our financial performance. Failure to comply with or to respond to changes in these requirements and regulations could result in penalties on us, such as fines, restrictions on operations or the temporary or permanent closure of our facility. These penalties could have a material adverse effect on our business, operating results and financial condition. In addition, existing or new regulatory requirements or interpretations could materially adversely impact us.

We may not be able to maintain our NYSE American listing.

Our common stock has been listed on the NYSE American since 2005. If we are unable to satisfy the continued listing standards of the NYSE American, which include, among others, minimum stockholders’ equity, market capitalization, pre-tax income and per share sales price, our common stock may be delisted. If our common stock is delisted, we would be forced to have our common stock quoted on the OTC Markets or some other quotation medium, depending on our ability to meet the specific requirements of those quotation systems. In that case, we may lose some or all of our institutional investors, and selling our common stock on the OTC Markets would be more difficult because smaller quantities of shares would likely be bought and sold, and transactions could be delayed. These factors could result in lower prices and larger spreads in the bid and ask prices for shares of our common stock. If this happens, we will have greater difficulty accessing the capital markets to raise any additional necessary capital.

Any infringement claim against us could have a material adverse effect on our business, financial condition and results of operations.

As the number of competing products available in the market increases and the functions of those products further overlap, the potential for infringement claims may increase. Any such claims, with or without merit, may result in costly litigation or require us to redesign the affected product to avoid infringement or require us to obtain a license for future sales of the affected product. Any of the foregoing could damage our reputation and have a material adverse effect upon our business, financial condition and results of operations. Any litigation resulting from any such claim could require us to incur substantial costs and divert significant resources, including the efforts of our management and engineering personnel.

Table of Contents

We have deferred tax assets that we may not be able to utilize under certain circumstances.

If we incur future operating losses, we may be required to provide some or all of our deferred tax assets with a valuation allowance, resulting in additional non-cash income tax expense. The change in the valuation allowance may have a material impact on future net income or loss.

We may be unable to obtain components and parts that are verified to be Democratic Republic of Congo (“DRC”) conflict-free, which could result in reputational damage.

The Dodd-Frank Wall Street Reform and Consumer Protection Act includes disclosure requirements regarding the use of tin, tantalum, tungsten and gold (which are defined as “conflict minerals”) in our products and whether these materials originated from the DRC or an adjoining country. The SEC rules necessitate a complex compliance process and related administrative expense for a company once it determines a conflict mineral is necessary to the functionality or production of a product that the company manufactures or contracts to manufacture. These requirements could affect the sourcing, availability and cost of minerals used in the manufacture of certain of our products, and we may not be able to obtain conflict-free products or supplies in sufficient quantities or at competitive prices for our operations. We have incurred, and will continue to incur, costs associated with complying with these supply chain due diligence procedures. In addition, because our supply chain is complex, if we discover that our products include minerals that have been identified as “not found to be DRC conflict-free” or we are unable to determine whether such minerals are included in our products, we may face reputational challenges with our customers, stockholders and other stakeholders as a result.

As a holding company, BK Technologies Corporation is dependent on the operations and funds of its subsidiaries.

On March 28, 2019, we completed a reorganization pursuant to which BK Technologies Corporation became a holding company with no business operations of its own. BK Technologies Corporation’s only significant assets are the outstanding equity interests in BK Technologies, Inc. and any other future subsidiaries of BK Technologies Corporation. As a result, we rely on cash flows from subsidiaries to meet our obligations, including payment of dividends to our stockholders. The holding company reorganization was intended to create a more efficient corporate structure and increase operational flexibility. The anticipated benefits of this reorganization may not be obtained if circumstances prevent us from taking advantage of the opportunities that we expect it may afford us. As a result, we may incur the costs of a holding company structure without realizing the anticipated benefits, which could adversely affect our reputation, financial condition, and results of operations.

Item 1B. Unresolved Staff Comments.

None.

Item 1C. Cybersecurity.

Cybersecurity Risk Management and Strategy

We face cybersecurity risks, as a small company, due to the breadth of networks and systems we utilize to design, develop, produce and sell our LMR products. We also use third-party products, services and components to produce our LMR products. We are committed to maintaining robust governance and oversight of these risks and implementing mechanisms, controls, technologies, and processes designed to help us assess, identify, and manage these risks. While we have not, as of the date of this Form 10-K, experienced a cybersecurity threat or incident that resulted in a material adverse impact to our business or operations, there can be no guarantee that we will not experience such an incident in the future. Such incidents, whether or not successful, could result in our incurring significant costs related to rebuild our internal systems, implement additional threat protection measures, provide modifications or replacements to our products, respond to regulatory inquiries or actions, pay damages, provide customers with incentives to maintain a business relationship with us, or take other remedial steps with respect to third parties, as well as incurring significant reputational harm. In addition, these threats are constantly evolving, thereby increasing the difficulty of successfully defending against them or implementing adequate preventative measures.

Table of Contents

We seek to detect and investigate unauthorized attempts and attacks against our network and to prevent their occurrence and recurrence where practicable through changes or updates to our internal processes, tools and changes or updates to our products; however, we remain potentially vulnerable to known or unknown threats. In some instances, we, our suppliers, our customers and the users of our products can be unaware of a threat or incident or its magnitude and effects. Further, there is increasing regulation regarding responses to cybersecurity incidents, including reporting to regulators, which could subject us to additional liability and reputational harm. See “Risk Factors” for more information on our cybersecurity risks and product vulnerability risks.

As a supplier of LMR products to federal, state and municipality agencies, our cybersecurity strategy focuses on implementing effective and efficient controls, technologies, and other processes to assess, identify, and manage material cybersecurity risks. We have retained the assistance of a Cybersecurity expert consultant, to assist internal management to evaluate processes in place to assess, identify, manage, and address material cybersecurity threats and incidents. These include, among other things: annual and ongoing security awareness training for employees; mechanisms to detect and monitor unusual network activity; and containment and incident response tools. We monitor issues that are internally discovered or externally reported that may affect our products and have processes to assess those issues for potential cybersecurity impact or risk. We are also implementing a process to manage cybersecurity risks associated with third-party service providers. We impose security requirements upon our suppliers, including maintaining an effective security management program; abiding by information handling and asset management requirements; and notifying us in the event of any known or suspected cyber incident.

Cybersecurity Governance

Our Board of Directors has ultimate oversight of cybersecurity risk, which it manages as part of our enterprise risk management program. That program is utilized in making decisions with respect to company priorities, resource allocations, and oversight structures. The Board of Directors is assisted by the Audit Committee, which regularly reviews our cybersecurity program with management and reports to the Board of Directors. Cybersecurity reviews by the Audit Committee or the Board of Directors generally occur at least twice annually, or more frequently as determined to be necessary or advisable.

Our cybersecurity program is run by our Chief Information Security Officer (CISO) and Chief Financial Officer (CFO), who reports to our Chief Executive Officer (CEO). Our CISO is informed about and monitors prevention, detection, mitigation, and remediation efforts through regular communication and reporting from our IT Director and the Cybersecurity consultant expert.

Item 2. Properties.

We do not own any real estate. We lease approximately 54,000 square feet of industrial space at 7100 Technology Drive in West Melbourne, Florida. In November 2018, the lease was amended to provide for certain leasehold improvements and extend the lease term until June 30, 2027. Rental, maintenance and tax expenses for this facility were approximately $596,000 and $688,000 in 2023, and 2022, respectively.

We lease approximately 6,857 square feet of office space at Sawgrass Technology Park, 1619 NW 136^th Avenue in Sunrise, Florida. This lease will expire on December 31, 2025. Annual rental, maintenance and tax expenses for the facility were approximately $212,000 and $203,000 in 2023, and 2022, respectively.

Item 3. Legal Proceedings.

From time to time we may be involved in various claims and legal actions arising in the ordinary course of our business. There were no pending material claims or legal matters as of December 31, 2023.

Item 4. Mine Safety Disclosures.

Not applicable.

Table of Contents

PART II

Item 5. Market For Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

	(a)	Market Information.

		Our common stock trades on the NYSE American under the symbol “BKTI.”

	(b)	Holders.

		On March 1, 2024, there were 128 holders of record of our common stock.

	(c)	Dividends.

During 2022, pursuant to our capital return program, we declared and paid three quarterly dividends. The dividends declared in April, June and September 2022 were $0.03 per share. The Company announced the indefinite suspension of its quarterly cash dividend program in March 2023. The declaration and payment of cash dividends, if any, is subject to the discretion of the Board of Directors. The Board’s final determination as to whether to declare and pay dividends is based upon its consideration of our operating results, financial condition and anticipated capital requirements, as well as such other factors it may deem relevant. Past performance is no guarantee of future results.

We received dividends from our wholly owned subsidiary, BK Technologies, Inc., to fund past dividends to our stockholders.

(d)

Issuer Purchases of Equity Securities.

On December 21, 2021, the Company announced that the Board has authorized a share repurchase program which permits the Company to purchase up to an aggregate of $5 million of its common shares. The program does not have an expiration date. Any repurchases would be funded using cash on hand and cash from operations. The actual timing, manner and number of shares repurchased under the program will be determined by management and the Board of Directors at their discretion, and will depend on several factors, including the market price of the Company’s common shares, general market and economic conditions, alternative investment opportunities, and other business considerations in accordance with applicable securities laws and exchange rules. The authorization of the share repurchase program does not require BK Technologies to acquire any particular number of shares and repurchases may be suspended or terminated at any time at the Company’s discretion. The Company has not purchased shares of our common stock under this program in 2023 and 2022.

ISSUER PURCHASES OF EQUITY SECURITIES
Period	Total Number of Shares Purchased		Average Price Paid Per Share		Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs		Approximate Dollar Value of Shares that May Still be Purchased Under the Plans or Programs


October 1-31, 2023		—		—		—	$	5,000,000
November 1-30, 2023		—		—		—	$	5,000,000
December 1–31, 2023		—		—		—	$	5,000,000

TOTAL		—	$	—		—	$	5,000,000

Table of Contents

On January 31, 2023, the Company entered into a sales agreement (the “Sales Agreement”) with ThinkEquity LLC (the “Sales Agent”), relating to the sale of shares of our Common Stock. In accordance with the terms of the Sales Agreement, we may offer and sell shares of our Common Stock from time to time up to an aggregate offering price of $15,000,000 through or to the Sales Agent, acting as sales agent or principal. After adjusting for the Reverse Stock Split, the number of shares issuable under the terms of the Sales Agreement is 845,070 shares of our Common Stock. The Company intends to use the net proceeds from the offering primarily for general corporate purposes, which may include working capital, capital expenditures, operational purposes, strategic investments and potential acquisitions in complementary businesses. As of December 31, 2023, the Company sold approximately $50,000. On December 27, 2023, the Company notified the Sales Agent that it was terminating the Sales Agreement as of December 29, 2023, as per the terms of the Sales Agreement. The Company’s “shelf” registration statement on Form S-3 that was filed with the SEC on December 11, 2020, and amended December 21, 2020, expired on December 29, 2023.

Item 6. [Reserved]

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Forward-Looking Statements

We believe that it is important to communicate our future expectations to our security holders and to the public. This report, including any information incorporated by reference in this report, therefore, contains statements about future events and expectations which are “forward-looking statements” within the meaning of Sections 27A of the Securities Act of 1933, as amended, and 21E of the Exchange Act, including the statements about our plans, objectives, expectations and prospects under the heading “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” You can expect to identify these statements by forward-looking words such as “may,” “might,” “could,” “would,” “should,” “will,” “anticipate,” “believe,” “plan,” “estimate,” “project,” “expect,” “intend,” “seek,” “are encouraged” and other similar expressions. Any statement contained in this report that is not a statement of historical fact may be deemed to be a forward-looking statement. We also may make forward-looking statements in other documents that are filed or furnished with the SEC. In addition, we may make forward-looking statements orally or in writing to investors, analysts, members of the media, or others. Forward-looking statements include, but are not limited to, the following: changes or advances in technology; the success of our SaaS and Radio business lines and the products offered thereunder; successful introduction of new products and technologies, including our ability to successfully develop and sell our anticipated SaaS products, and our new multiband radio product and other related products in the BKR Series product line; competition in the LMR industry; general economic and business conditions, including higher inflation and its impacts, federal, state and local government budget deficits and spending limitations, any impact from a prolonged shutdown of the U.S. Government, the effects of natural disasters, changes in climate, severe weather events, geopolitical events, acts of war or terrorism, global health epidemics or pandemics (such as the COVID-19 pandemic) and catastrophic events, as well as the broader impacts to financial markets and the global macroeconomic and geopolitical environments; the availability, terms and deployment of capital; reliance on contract manufacturers and suppliers; risks associated with fixed-price contracts; heavy reliance on sales to agencies of the U.S. Government and our ability to comply with the requirements of contracts, laws and regulations related to such sales; allocations by government agencies among multiple approved suppliers under existing agreements; our ability to comply with U.S. tax laws and utilize deferred tax assets; our ability to attract and retain executive officers, skilled workers and key personnel; our ability to manage our growth; our ability to identify potential candidates for, and to consummate, acquisition, disposition or investment transactions, and risks incumbent to being a noncontrolling interest stockholder in a corporation; impact of natural disasters, changes in climate, severe weather events, geopolitical events, acts of war or terrorism, global health epidemics or pandemics (such as the COVID-19 pandemic) and catastrophic events on the companies in which the Company holds investments; impact of our capital allocation strategy; risks related to maintaining our brand and reputation; impact of government regulation; impact of rising health care costs; our business with manufacturers located in other countries, including changes in the U.S. Government and foreign governments’ trade and tariff policies; our inventory and debt levels; protection of our intellectual property rights; fluctuation in our operating results and stock price; any infringement claims; data security breaches, cyber-attacks and other factors impacting our technology systems; availability of adequate insurance coverage; maintenance of our NYSE American listing; risks related to being a holding company; and the effect on our stock price and ability to raise equity capital of future sales of shares of our common stock.

Table of Contents

Although we believe that the plans, objectives, expectations and prospects reflected in or suggested by our forward-looking statements are reasonable, those statements involve risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by these forward-looking statements, and we can give no assurance that our plans, objectives, expectations and prospects will be achieved. Any forward-looking statement made by us or on our behalf speaks only as of the date that it was made. We do not undertake to update any forward-looking statement to reflect the impact of events, circumstances, or results that arise after the date that the statement was made, except as required by applicable securities laws. You, however, should consult further disclosures (including disclosures of a forward-looking nature) that we may make in any subsequent Annual Report on Form 10-K, Quarterly Report on Form 10-Q, or Current Report on Form 8-K.

Important factors that might cause our actual results to differ materially from the results contemplated by the forward-looking statements are contained in “Part I—Item 1A. Risk Factors” and elsewhere in this report and in our subsequent filings with the SEC. We assume no obligation to publicly update or revise any forward-looking statements made in this report, whether as a result of new information, future events, changes in assumptions or otherwise, after the date of this report. Readers are cautioned not to place undue reliance on these forward-looking statements.

Executive Summary

In business for over 70 years, BK has operated two business units through its operating subsidiary, BK Technologies, Inc.: Radio and SaaS.

Generally, BK Technologies-branded products serve government markets including but not limited to emergency response, public safety, homeland security and military customers of federal, state and municipal government agencies, as well as various industrial and commercial enterprises. We believe that our products and solutions provide superior value by offering a high specification, ruggedized, durable, reliable, feature rich, P25 compliant radio at a lower cost relative to comparable offerings.

The SaaS business unit focuses on delivering innovative, public safety smartphone applications which operate ubiquitously over public cellular networks. Our BKRPlay branded smartphone application will offer multiple services which make the first responder safer and more efficient. When tethered to our radios, the combined solution will offer more unique capability which increases the sales reach of our radios.

We were incorporated under the laws of the State of Nevada on October 24, 1997. We are the resulting corporation from the reincorporation merger of our predecessor, Adage, Inc., a Pennsylvania corporation, which reincorporated from Pennsylvania to Nevada effective as of January 30, 1998. Effective on June 4, 2018, we changed our corporate name from “RELM Wireless Corporation” to “BK Technologies, Inc.”

Our principal executive offices are located at 7100 Technology Drive, West Melbourne, Florida 32904 and our telephone number is (321) 984-1414.

Customer demand and orders for our products were strong during 2022 and 2023. Supply chain constraints limited our ability to manufacture the quantities needed to ship and fulfill all the orders in 2022. Consequently, approximately $27 million customer orders were carried in backlog, and we fulfilled approximately 76% of those orders during the first half of 2023 and most of the remainder as of December 31, 2023.

For 2023, sales grew approximately 45.4% to approximately $74.1 million, compared with $51.0 million for the prior year. The growth was attributed primarily to the backlog described above, as well as the launch of the first model in our BKR line of products. Gross profit margins as a percentage of sales in 2023 were 30.0%, compared with 19.3% for the prior year, generally reflecting decreases in material, component and freight costs related to supply chain challenges experienced in 2022. Selling, general and administrative (“SG&A”) expenses for 2023 totaled approximately $23.0 million (31.1% of sales), compared with $20.9 million (41.1% of sales) last year. We recognized an operating loss in 2023 of approximately $0.8 million, which was attributed primarily to increased operating expenses related to the introduction of the BKR9000 multi-band portable radio product. For the prior year we recognized an operating loss of approximately $11.1 million.

Table of Contents

In 2023 we recognized other expenses, net totaling approximately $1.4 million, primarily attributed to net unrealized losses from our investment in FG Financial Holdings, LLC and net interest expense. This compares with other expense of $0.6 million last year, which was also primarily related to an unrealized loss from the investment in FG Financial Group, Inc. and net interest expense.

For 2023 the pretax loss totaled approximately $2.2 million, compared with pretax loss of approximately $11.6 million for the prior year.

We recognized $54,000 and no tax expense in 2023 and 2022, respectively.

The net loss for 2023 totaled approximately $2.2 million ($0.65 per basic share), compared with net loss of approximately $11.6 million ($3.44 per basic share) last year.

As of December 31, 2023, working capital totaled approximately $16.8 million, of which $11.4 million was comprised of cash, cash equivalents and trade receivables. This compares with working capital totaling approximately $13.2 million at 2022 year-end, which included $12.5 million of cash, cash equivalents and trade receivables. During 2022, we declared three and paid four quarterly dividends, utilizing cash of approximately $2.0 million.

Impact of COVID-19 Pandemic and Supply Chain

In December 2019, a novel strain of the coronavirus (COVID-19) surfaced, which spread globally and was declared a pandemic by the World Health Organization in March 2020. The challenges posed by the COVID-19 pandemic on the global economy increased significantly in the first several months of 2020, and have since diminished, though there are lingering effects as noted below. Coming out of the COVID-19 pandemic, we received record customer orders of approximately $70 million in 2022. However, worldwide shortages of materials, particularly semiconductors and integrated circuits, have resulted in limited supplies, extended lead times, and increased our costs and inventory levels for certain components used in our products. While, generally, we were able to procure the material necessary to manufacture our products and fulfill customer orders in 2022, there were some delays and longer delivery times within our supply chain. During 2023, we were able to achieve incremental improvement for the COVID-19 supply chain disruption challenges to that of more normal pre-pandemic experience. While the impacts of COVID-19 are reflected in our results of operations, we cannot at this time separate the direct COVID-19 impacts from other factors that cause our performance to vary from quarter to quarter. For additional risks relating to the COVID-19 pandemic and geopolitical conflicts in Ukraine and Israel, see Item 1A. Risk Factors in Part II of this report.

We may experience fluctuations in our quarterly results, in part, due to governmental customer spending patterns that are influenced by government fiscal year-end budgets and appropriations. We may also experience fluctuations in our quarterly results, in part, due to our sales to federal and state agencies that participate in wildland fire-suppression efforts, which may be greater during the summer season when forest fire activity is heightened. In some years, these factors may cause an increase in sales for the second and third quarters, compared with the first and fourth quarters of the same fiscal year. Such increases in sales may cause quarterly variances in our cash flow from operations and overall financial condition.

Table of Contents

Results of Operations

As an aid to understanding our operating results, the following table shows items from our consolidated statements of operations expressed as a percentage of sales:

	Percent of Sales for Years Ended December 31,
	2023			2022
Sales		100.0	%		100.0	%
Cost of products		(70.0	)		(80.7	)
Gross margin		30.0			19.3
Selling, general and administrative expenses		(31.0	)		(41.1	)
Other (expense) income, net		(1.9	)		(1.1	)
(Loss) income before income taxes		(2.9	)		(22.8	)
Income tax expense		(0.1	)		—
Net loss		(3.0	)%		(22.8	)%

Fiscal Year 2023 Compared with Fiscal Year 2022

Sales, net

For 2023, net sales increased approximately $23.1 million to approximately $74.1 million, compared with approximately $51.0 million last year.

Customer demand and orders for our products were strong in 2023 and 2022. Supply chain constraints limited our ability to manufacture the quantities needed to convert the orders into shipments and sales revenue in 2022. Accordingly, as of December 31, 2022, these orders were carried in backlog, and we fulfilled 76% of them during the first half of 2023. Although supply chain factors continued to impact production costs for certain components during 2023, we have been able to achieve incremental improvement and fulfill customer requirements.

The increase in sales for the year ended December 31, 2023, was attributed primarily to the BKR5000 portable LMR product to federal, state and municipal public safety agencies, some of which were new customers.

The BKR Series is envisioned as a comprehensive line of new products, which will include additional models in coming quarters and years. The timing of developing additional BKR Series products and bringing them to market could be impacted by various factors, including potential impacts related to our supply chain, labor shortages, wage pressures, rising inflation, and other force majeure events. BKR Series products, we believe, should increase our addressable market by expanding the number of federal and other public safety customers that may purchase our products. However, the timing and size of orders from agencies at all levels can be unpredictable and subject to budgets, priorities, and other factors. Accordingly, we cannot assure that sales will occur under particular contracts, or that our sales prospects will otherwise be realized.

As of the end of 2023, our current backlog of customer orders and the funnel of sales prospects is healthy and includes potential new customers in federal, state, and local public safety agencies. We believe the BKR Series products, our expanded sales force, and our sales funnel, position us well to capture new sales opportunities moving forward.

The impacts of material shortages, lead-times, labor shortages, wage pressures, rising inflation, the ongoing military conflicts in Ukraine and the Middle East and other geopolitical events in coming months and quarters is uncertain. Such effects have the potential to adversely impact our customers and our supply chain, which could adversely affect our future sales, operations, and financial results.

Cost of Products and Gross Profit Margin

Gross profit margins as a percentage of sales for 2023 were approximately 30.0%, compared with 19.3% for the prior year.

Table of Contents

Our cost of products and gross profit margins are primarily derived from material, labor and overhead costs, product mix, manufacturing volumes and pricing. Gross profit margins for the year ended December 31, 2023, increased compared with the same period last year primarily due to decreased material, component and freight costs related primarily to improvement in supply chain factors.

We utilize a combination of internal manufacturing capabilities and contract manufacturing relationships for production efficiencies and to manage material and labor costs. While we anticipate continuing to do so in the future, we have increased, and are continuing to increase, our utilization of contract manufacturing resources, which provides increased flexibility for our production capacity to meet increased demand. We believe that our current manufacturing capabilities and contract relationships or comparable alternatives will continue to be available to us. Although in the future we may encounter new product costs and competitive pricing pressures, the extent of their impact on gross margins, if any, is uncertain.

During the last two years, worldwide shortages of materials, including semiconductors and integrated circuits, have resulted in limited supplies and extended lead times for certain components used in our products. While we have generally been able to procure the material necessary to manufacture our products and fulfill customer orders, there have been delays, extended lead times and increased costs within our supply chain. While the progression and duration of these shortages is not known with certainty, they have had a lesser impact on our operations for the last twelve months. The impact on our operations of such shortages, or additional shortages that may surface, is uncertain, but could potentially impact our future sales, manufacturing operations and financial results.

Selling, General and Administrative Expenses

SG&A expenses consist of marketing, sales, commissions, engineering, product development, management information systems, accounting, headquarters, and non-cash share-based employee compensation expenses.

SG&A expenses for the year ended December 31, 2023, totaled approximately $23.0 million (31.1% of sales), compared with approximately $20.9 million (41.1% of sales) for the prior year.

Engineering and product development expenses for 2023 totaled approximately $9.3 million (12.6% of sales), compared with approximately $9.6 million (18.8% of sales) for the prior year. The engineering expense of $9.6 million for 2022, included a one-time write-off of $646,000 of new product development components that were not included in the final design of the BKR 9000 radio. Engineering and product development expenses are primarily related to the continued design and development of BKR Series, a new line of portable and mobile radios. These development activities are the main focus of our engineering team. The precise date for developing and introducing new products is uncertain and can be impacted by, among other things, supply chain shortages and the potential economic effects of the conflicts in Ukraine and Israel in coming quarters.

Marketing and selling expenses for the year ended December 31, 2023, totaled approximately $6.1 million (8.2% of sales), compared with approximately $4.4 million (8.6% of sales) for the prior year. The increase in marketing and selling expenses for the year are attributed to staff-related and other sales and go-to-market expenses for the BKR9000 product.

General and administrative expenses for the year ended December 31, 2023, totaled approximately $7.6 million (10.3% of sales), compared with approximately $6.9 million (13.6% of sales) for the prior year. The increase in general and administrative expenses for the year is attributed primarily to corporate management and headquarters-related expenses.

Operating Loss

For the year ended December 31, 2023, our operating loss totaled approximately $0.8 million (1.0% of sales), compared with operating loss of approximately $11.1 million (21.7% of sales), for the prior year. The operating loss for the year is attributed primarily to increased engineering and administrative expenses, related to the introduction of the BKR9000 product.

Other (Expense) Income

Interest (Expense) Income

We recorded net interest expense of approximately $575,000 for the year ended December 31, 2023, compared with approximately $144,000 for the prior year. Net interest expenses were attributed primarily to our credit facility and equipment financing.

Gain/Loss on Investments

For the year ended December 31, 2023, we recognized an unrealized loss of approximately $740,000 on our investment in FG Financial Holdings, LLC compared with an unrealized loss on investments of approximately $313,000 for the prior year.

Table of Contents

Income Tax/(Expense) Benefit

We recorded $54,000 and no income tax expense for the years ended December 31, 2023 and 2022, respectively.

Our income tax provision is based on the effective tax rate for the year. The tax expense in any period may be affected by, among other things, permanent, as well as temporary, differences in the deductibility of certain items, in addition to changes in tax legislation. As a result, we may experience fluctuations in the effective book tax rate (that is, tax expense divided by pre-tax book income) from period to period.

As of December 31, 2023, our net deferred tax assets totaled approximately $4.1 million, and were primarily derived from research and development tax credits, operating loss carryforwards and deferred revenue.

In order to fully utilize the net deferred tax assets, we will need to generate sufficient taxable income in future years. We analyze all positive and negative evidence to determine if, based on the weight of available evidence, we are more likely than not to realize the benefit of the net deferred tax assets. The recognition of the net deferred tax assets and related tax benefits is based upon our conclusions regarding, among other considerations, estimates of future earnings based on information currently available and current and anticipated customers, contracts, and product introductions, as well as historical operating results and certain tax planning strategies.

Based on our analysis of all available evidence, both positive and negative, we have concluded that we do not have the ability to generate sufficient taxable income in the necessary period to utilize the entire benefit for the deferred tax assets. Accordingly, we established a valuation allowance of $4,398,000. We cannot presently estimate what, if any, changes to the valuation of our deferred tax assets may be deemed appropriate in the future. If we incur future losses, it may be necessary to record additional valuation allowance related to the deferred tax assets recognized as of December 31, 2023.

Liquidity and Capital Resources

For the year ended December 31, 2023, net cash provided by operating activities totaled approximately $1.7 million, compared with cash used by operating activities of approximately $9.0 million for the prior year. Cash provided by operating activities for the year was primarily related to an increase in deferred revenues, a decrease in accounts receivable and depreciation and amortization, which were partially offset by decreases in accounts payable, increases in inventories, and the net loss.

For 2023, we had a net loss of $2.2 million, compared with net loss of approximately $11.6 million for the prior year. Net inventories increased during the year ended December 31, 2023, by approximately $2.4 million, compared with an increase of approximately $5.1 million for the prior year. The increase was primarily attributable to material for new product introductions as well as extended supply-chain lead times on certain components encountered in 2022. Accounts receivable decreased approximately $2.7 million during the year ended December 31, 2023, primarily due to the timing of sales that were consummated later in the year in 2022 that had not yet completed their collection cycle. For the same period last year, accounts receivable increased approximately $2.4 million. Accounts payable for the year ended December 31, 2023, decreased approximately $3.1 million, compared with an increase of approximately $7.0 million for the prior year, primarily due to the timing of purchases and longer lead times for materials from suppliers in 2022. Depreciation and amortization totaled approximately $1.6 million for the year ended December 31, 2023, compared with approximately $1.4 million for the prior year. Depreciation and amortization are primarily related to manufacturing and engineering equipment.

Cash used in investing activities for the year ended December 31, 2023, totaled approximately $2.1 million, primarily for manufacturing and engineering related equipment. For the prior year, cash used in investing activities totaled approximately $1.8 million, primarily for purchases of engineering and manufacturing related equipment.

For the year ended December 31, 2023, cash of approximately $2.0 million was provided by financing activities. During the year, we received proceeds of approximately $74.9 million from the IPSA with Alterna Capital Solutions LLC described below. This was partially offset by credit facility repayments of $74.4 million and loan repayments of approximately $535. For the prior year, we received proceeds of approximately $9.7 million from our IPSA revolving credit facility with Alterna Capital Solutions, LLC and the Credit Agreement with JPMC described below, that was partially offset by credit facility repayments of $5.3 and loan repayments of approximately $277,000. We discontinued the quarterly dividend program in 2023 and used cash of approximately $2.0 million to pay quarterly dividends for the year ended December 31, 2022.

On November 6, 2023, we entered into a Master Service Agreement with East West Manufacturing, LLC (EWMSA), that included a private offering of 77,520 shares of our common stock, generating net proceeds of $1.0 million. As a part of the EWMSA, the Company also issued warrants for the purchase of an additional 135,300 shares of our common stock for $15.00 per share. The warrants have a five (5) year exercise term. Net proceeds for the issuance of the 135,300 warrants generated $1.0 million, which was paid by a $950,000 reduction in accounts payable and $50,000 in cash.

Table of Contents

On November 22, 2022, the Company’s Subsidiaries (BK Technologies, Inc. and RELM Communications, Inc.) entered into an Invoice Purchase and Security Agreement (the “IPSA”) with Alterna Capital Solutions, LLC (“Alterna”) for a one-year line of credit with total maximum funding up to $15 million, with an interest rate of Prime plus 1.85% and other monthly administrative fees. In November 2023, the IPSA was extended for one year. The IPSA line of credit is an accounts receivable and inventory financing facility, with the borrowing base of up to 85% of eligible accounts receivable and up to 75% of net orderly liquidation value of inventory, not to exceed 100% of eligible accounts receivable. The Company used the funds obtained from the IPSA to replace the existing JPMC Credit Agreement described below and for working capital for the business.

BK Technologies, Inc., our wholly owned subsidiary, entered into the $5 million Credit Agreement with JPMC. The JPMC Credit Agreement provided for a revolving line of credit of up to $5 million, with availability under the line of credit subject to a borrowing base calculated as a percentage of accounts receivable and inventory. Proceeds of borrowings under the JPMC Credit Agreement were used for general corporate purposes. The line of credit was collateralized by a blanket lien on all personal property of BK Technologies, Inc. pursuant to the terms of the Continuing Security Agreement with JPMC. BK Technologies Corporation and each subsidiary of BK Technologies, Inc., were guarantors of the obligations under the JPMC Credit Agreement, in accordance with the terms of the Continuing Guaranty. The outstanding balance of this credit facility was paid in full in November 2022, once the Company received the new IPSA funding.

Borrowings under the JPMC Credit Agreement were to bear interest at the secured overnight financing rate plus a margin of 2.0%. The line of credit is to be repaid in monthly payments of interest only, payable in arrears, with all outstanding principal and interest to be payable in full at maturity.

The JPMC Credit Agreement contained certain customary restrictive covenants, including restrictions on liens, indebtedness, loans and guarantees, acquisitions and mergers, sales of assets, and stock repurchases by BK Technologies, Inc. The Credit Agreement contained one financial covenant requiring BK Technologies, Inc., to maintain a tangible net worth of at least $20 million at any fiscal quarter end.

The JPMC Credit Agreement provided for customary events of default, including: (1) failure to pay principal, interest or fees under the JPMC Credit Agreement when due and payable; (2) failure to comply with other covenants and agreements contained in the Credit Agreement and the other documents executed in connection therewith; (3) the making of false or inaccurate representations and warranties; (4) defaults under other agreements with JPMC or under other debt or other obligations of BK Technologies, Inc.; (5) money judgments and material adverse changes; (6) a change in control or ceasing to operate business in the ordinary course; and (7) certain events of bankruptcy or insolvency. Upon the occurrence of an event of default, JPMC may have declared the entire unpaid balance immediately due and payable and/or exercise any and all remedial and other rights under the Credit Agreement.

The IPSA provides for the payment of fees by the Subsidiaries and includes customary representations and warranties, indemnification provisions, covenants and events of default. Subject in some cases to cure periods, amounts outstanding under the IPSA may be accelerated for typical defaults including, but not limited to, the failure to make payments when due, the failure to perform any covenant, the inaccuracy of representations and warranties, the occurrence of debtor-relief proceedings, and the occurrence of unpermitted liens against the purchased accounts receivable and collateral. The Subsidiaries have granted Alterna a security interest in all of their respective personal property to secure their obligations under the IPSA. The Subsidiaries entered into a cross-guarantee, guaranteeing each other’s obligations under the IPSA, and BK also provided a guaranty of the Subsidiaries’ obligations under the IPSA.

As of December 31, 2023, and the date of filing this report, approximately $6.5 million and $6.6 million, respectively, in borrowings were outstanding under the IPSA.

On April 6, 2021, BK Technologies, Inc., a wholly owned subsidiary of BK Technologies Corporation, and JPMC, as a lender, entered into a Master Loan Agreement in the amount of $743 to finance various items of manufacturing equipment (the “JPMC Credit Agreement”). The Company used funds obtained from the Line of Credit to replace the JPMC Credit Agreement. This note payable was paid in full on June 27, 2023.

On September 25, 2019, BK Technologies, Inc., a wholly owned subsidiary of BK Technologies Corporation, and U.S. Bank Equipment Finance, a division of U.S. Bank National Association, as a lender, entered into a Master Loan Agreement in the amount of $425 to finance various items of equipment. The loan is collateralized by the equipment purchased using the proceeds. The Master Loan Agreement is payable in 60 monthly principal and interest payments of approximately $8 beginning on October 25, 2019 and maturing on September 25, 2024, and bears a fixed interest rate of 5.11%

Our cash and cash equivalents balance at December 31, 2023, was approximately $3.5 million. We believe these funds, combined with anticipated cash generated from operations and borrowing availability under our IPSA, are sufficient to meet our working capital requirements for the foreseeable future. We may, depending on a variety of factors, including market conditions for capital raises, the trading price of our common stock and opportunities for uses of any proceeds, engage in public or private offerings of equity or debt securities to increase our capital resources. However, financial and economic conditions, including those resulting from supply chain delays or interruptions, labor shortages, wage pressures, rising inflation, geopolitical events, and other force majeure events, could limit our access to credit and impair our ability to raise capital, if needed, on acceptable terms or at all. We also face other risks that could impact our business, liquidity, and financial condition. For a description of these risks, see “Item 1A. Risk Factors” set forth in this report.

Table of Contents

Recent Accounting Pronouncements

The Company does not discuss recent pronouncements that are not anticipated to have an impact on or are unrelated to its financial condition, results of operations, cash flows or disclosures.

In June 2016, the FASB issued ASU 2016-13, Financial Instruments - Credit Losses (Topic 326), Measurement of Credit Losses on Financial Instruments. ASU 2016-13 introduced an expected credit loss methodology for the measurement and recognition of credit losses on most financial assets, including financial assets arising from revenue transactions, such as accounts receivable. The new expected credit loss methodology, which is based on a combination of historical experience, current conditions and reasonable and supportable forecasts, replaced the incurred loss model for measuring and recognizing expected credit losses. This ASU is effective for the Company for 2023, and management incorporated this guidance into its methodology for estimating its accounts receivable allowances. Based on historical trends, the financial condition of the Company’s customers and management’s expectations of economic and industry factors affecting the Company’s customers, the adoption of ASU 2016-13 did not have a material effect on the Company’s consolidated financial statements.

Critical Accounting Policies and Estimates

In response to the Securities and Exchange Commission’s financial reporting release, FR-60, Cautionary Advice Regarding Disclosure About Critical Accounting Policies, we have selected for disclosure our revenue recognition process and our accounting processes involving significant judgments, estimates and assumptions. These processes affect our reported revenues and current assets and are, therefore, critical in assessing our financial and operating status. We regularly evaluate these processes in preparing our financial statements. The processes for determining the allowance for credit losses on trade receivables, allowance for excess or obsolete inventory, and income taxes involve certain assumptions and estimates that we believe to be reasonable under present facts and circumstances. These estimates and assumptions, if incorrect, could adversely impact our operations and financial position.

There were no changes to our critical accounting policies during the twelve months ended December 31, 2023, other than the adoption of ASU 2016-13 described above.

Allowance for Credit Losses

The allowance for credit losses was approximately $50,000 on gross trade receivables of approximately $7.9 million as of December 31, 2023, as compared with $50,000 on gross trade receivables of approximately $10.7 million as of December 31, 2022. The Company records an allowance for credit losses for its financial instruments, which are primarily composed of trade accounts receivable. The measurement and recognition of credit losses involves the use of judgment and represents management’s estimate of expected lifetime credit losses based on historical experience and trends, current conditions, and forecasts. The Company’s assessment of expected credit losses includes consideration of historical credit loss experience, the aging of account balances, customer concentrations, customer credit-worthiness, current and expected economic, market and industry factors affecting the Company’s customers, including their financial condition. The Company evaluates its experience with historical losses and then applies this historical loss ratio to financial assets with similar characteristics. The Company may also establish an allowance for credit losses for specific receivables when it is probable that the receivable will not be collected and the loss can be reasonably estimated. If the Company’s actual collections experience changes, revisions to the allowance may be required. Amounts are written off against the allowance when all attempts to collect a receivable have failed, and reversals of previously reserved amounts are recognized if a specifically reserved item is settled for an amount exceeding the previous estimate. Based on information available, management believes the allowance for credit losses as of December 31, 2023 and 2022 is adequate.

Slow Moving, Excess or Obsolete Inventory

The allowance for slow moving, excess or obsolete inventory was approximately $1.8 million and $1.2 million at December 31, 2023 and 2022, respectively.

The allowance for slow-moving, excess and obsolete inventory is used to state our inventories at the lower of cost or net realizable value. Because the amount of inventory that we will actually recoup through sales cannot be known with certainty at any particular time, we rely on past sales experience, future sales forecasts and our strategic business plans. Generally, in analyzing our inventory levels, we classify inventory as having been used or unused during the past year and establish an allowance based upon several factors, including, but not limited to, business forecasts, inventory quantities and historical usage profile. Supplemental to the aforementioned analysis, specific inventory items are reviewed individually by management. Based on the review, considering business levels, future prospects, new products and technology changes, management, using its business judgment, may adjust the valuation of specific inventory items to reflect an accurate valuation estimate. Management also performs a determination of net realizable value for all finished goods with a selling price below cost. For all such items, the inventory is valued at not more than the selling price less cost, if any, to sell.

Table of Contents

Allowance for Product Warranty

We offer two-year or five-year standard warranties to our customers, depending on the specific product and terms of the customer purchase agreement. Our typical warranties require us to repair and replace defective products during the warranty period at no cost to the customer. At the time the product revenue is recognized, we record a liability for estimated costs under our warranties. The costs are estimated based on historical experience. We periodically assess the adequacy of our recorded liability for product warranties and adjust the amount as necessary.

Income Taxes

We account for income taxes using the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using the enacted tax rates expected to apply in the period in which the deferred tax asset or liability is expected to be realized. The effect of changes in net deferred tax assets and liabilities is recognized on our consolidated balance sheets and consolidated statements of operations in the period in which the change is recognized. Valuation allowances are provided to the extent that it is more likely than not that some portion, or all, of deferred tax assets will not be realized. In determining whether a tax asset is realizable, we consider, among other things, estimates of future earnings based on information currently available, current and anticipated customers, contracts and new product introductions, as well as recent operating results and certain tax planning strategies. If we fail to achieve the future results anticipated in the calculation and valuation of net deferred tax assets, we may be required to increase the valuation allowance related to our deferred tax assets in the future.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

Not required for smaller reporting companies.

Item 8. Financial Statements and Supplementary Data.

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Stockholders

BK Technologies Corporation

West Melbourne, Florida

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheets of BK Technologies Corporation (the “Company”) as of December 31, 2023 and 2022, and the related consolidated statements of operations, changes in stockholders’ equity, and cash flows for each of the years in the two-year period ended December 31, 2023, and the related notes (collectively referred to as the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2023 and 2022, and the results of its operations and its cash flows for each of the years in the two-year period ended December 31, 2023, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As a part of our audits, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matters communicated below are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

Allowance for Slow-Moving, Excess, and Obsolete Inventory

As disclosed in Note 1 of the Company’s consolidated financial statements, the Company records an estimated allowance for slow-moving, excess, and obsolete inventory to state the Company’s inventories at the lower of cost or net realizable value. The Company relies on, among other things, past usage/sales experience, future sales forecasts, and its strategic business plan to develop the estimate. As a result of management’s assessment, the Company recorded an allowance for slow-moving, excess, and obsolete inventory of approximately $1,838,000 as of December 31, 2023.

Auditing management’s estimate of the allowance for slow-moving, excess, and obsolete inventory involved subjective evaluation and high degree of auditor judgement due to significant assumptions involved in estimating future inventory turnover and sales.

Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements. We obtained an understanding and evaluated the design of internal controls that address the risks of material misstatement relating to recording inventory at the lower of cost or net realizable value. We tested the accuracy and completeness of the underlying data used in calculating the allowance, including testing of a sample of inventory usage transactions, and recomputed the allowance calculation. We also evaluated the Company’s ability to accurately estimate the assumptions used to develop the estimate by comparing historical allowance amounts to the history of actual inventory write-offs. Furthermore, we reviewed management’s business plan and forecasts of future sales, including expected changes in technology and product lines.

F-1

Table of Contents

Assessment of Realizability of Deferred Tax Assets

As disclosed in Note 8 of the Company’s consolidated financial statements, the Company records and measures net deferred tax assets based on estimated realizability. Valuation allowances are provided to the extent that it is more likely than not that some portion, or all, of deferred tax assets will not be realized. The Company recorded approximately $4,116,000 in net deferred tax assets after recording a valuation allowance of approximately $4,398,000 as of December 31, 2023.

Auditing management’s assessment of the realizability of deferred tax assets involved subjective estimation and high degree of auditor judgment in determining whether sufficient future taxable income, including projected pre-tax income, will be generated to support the realization of the existing deferred tax assets before expiration.

Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements. We obtained an understanding and evaluated the design of internal controls that address the risks of material misstatement relating to the realizability of deferred tax assets, including controls over management’s projections of pre-tax income, and related entity-level controls. We also evaluated the assumptions used by the Company to develop projections of future taxable income, and tested the completeness and accuracy of the underlying data used in the projections, including comparing the projections of pre-tax income with the actual results of prior periods. In addition, we analyzed the nature of items giving rise to deferred tax assets and considered related expiration dates, as applicable. Furthermore, we evaluated management’s business plan and analysis of current economic and industry trends, including the impact of geopolitical tensions, and compared projections of future pre-tax income to other forecasted financial information prepared by management.

We have served as the Company’s auditor since 2015.

/s/ MSL, P.A.

Orlando, Florida

March 14, 2024

F-2

Table of Contents

BK TECHNOLOGIES CORPORATION

CONSOLIDATED BALANCE SHEETS

(in thousands, except share data)

	December 31, 2023			December 31, 2022

ASSETS

Current assets:
Cash and cash equivalents	$	3,456		$	1,918
Trade accounts receivable, net		7,902			10,616
Inventories, net		23,952			22,105
Prepaid expenses and other current assets		1,892			1,578
Total current assets		37,202			36,217

Property, plant and equipment, net		5,366			4,884
Operating lease right-of-use (ROU) assets		1,560			1,991
Investments		742			1,481
Deferred tax assets, net		4,116			4,116
Other assets		422			143
Total assets	$	49,408		$	48,832

LIABILITIES AND STOCKHOLDERS’ EQUITY

Current liabilities:
Accounts payable	$	9,822		$	12,898
Accrued compensation and related taxes		1,302			1,143
Accrued warranty expense		722			591
Accrued other expenses and other current liabilities		363			700
Short-term operating lease liabilities		525			485
Credit facility		6,476			5,854
Notes payable-current portion		71			277
Deferred revenue		1,137			1,022
Total current liabilities		20,418			22,970

Notes payable, net of current portion		—			329
Long-term operating lease liabilities		1,260			1,785
Deferred revenue		6,419			3,613
Total liabilities		28,097			28,697
Commitments and contingencies
Stockholders’ equity:
Preferred stock; $1.00 par value; 1,000,000 authorized shares; none issued or outstanding		—			—
Common stock; $0.60 par value; 10,000,000 authorized shares; 3,867,082 and 3,686,939 issued and 3,577,002 and 3,396,859 outstanding shares as of December 31, 2023 and 2022, respectively		2,320			2,212
Additional paid-in capital		48,602			45,304
Accumulated deficit		(24,209	)		(21,979	)
Treasury stock, at cost, 290,080 shares as of December 31, 2023, and 2022, respectively		(5,402	)		(5,402	)
Total stockholders’ equity		21,311			20,135
Total liabilities and stockholders’ equity	$	49,408		$	48,832

See notes to consolidated financial statements.

F-3

Table of Contents

BK TECHNOLOGIES CORPORATION

CONSOLIDATED STATEMENTS OF OPERATIONS

(in thousands, except per share data)

	Years Ended December 31,
	2023			2022
Sales, net	$	74,094		$	50,951
Expenses
Cost of products		51,858			41,107
Selling, general and administrative		23,013			20,925
Total operating expenses		74,871			62,032

Operating loss		(777	)		(11,081	)

Other (expense) income:
Net interest (expense)		(575	)		(144	)
Gain on disposal of property, plant, and equipment		—			1
(Loss) on investments		(740	)		(313	)
Other (expense)		(84	)		(96	)
Total other expense		(1,399	)		(552	)
Loss before income taxes		(2,176	)		(11,633	)
Provision for income tax (expense)		(54	)		—
Net loss	$	(2,230	)	$	(11,633	)
Net loss per share-basic and diluted	$	(0.65	)	$	(3.44	)
Weighted average shares outstanding-basic and diluted		3,427			3,382

See notes to consolidated financial statements.

F-4

Table of Contents

BK TECHNOLOGIES CORPORATION

CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS’ EQUITY

(in thousands, except share and per share data)

	Common Stock Shares		Common Stock Amount		Additional Paid-In Capital			Accumulated Deficit			Treasury Stock			Total
Balance as December 31, 2021		3,659,800		2,196		44,645			(8,821	)		(5,402	)		32,618
Common stock issued-restricted stock units		27,139		16		(16	)								—
Share-based compensation expense-stock options		—		—		271			—			—			271
Shared-based compensation expense-restricted stock units		—		—		404			—			—			404
Dividends declared ($0.03 per share)		—		—		—			(1,525	)		—			(1,525	)
Net loss		—		—		—			(11,633	)		—			(11,633	)
Balance at December 31, 2022		3,686,939		2,212		45,304			(21,979	)		(5,402	)		20,135
Common stock issued		94,376		59		1,004			—			—			1,063
Common stock issued-stock options		345		3		(3	)		—			—			—
Common stock issued-restricted stock units		85,422		46		(46	)		—			—

SEC Form 10-K filed by BK Technologies Corporation